Experimental Identification and Vibration Suppression of a Piezoelectric Flexible Manipulator Using Optimal Poles Assignment Method
Lou Junqiang1, Liao Jiangjiang1, Li Guoping1, Yang Yiling2, Wei Yanding2
1. Zhejiang Provincial Key Lab of Part Rolling Technology, College of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China;
2. China Key Laboratory of Advanced Manufacturing Technology of Zhejiang Province, School of Mechanical Engineering, Zhejiang University, Hangzhou, 310027, China
Experimental identification and active vibration suppression of a piezoelectric flexible manipulator system using poles assignment control are presented in this paper. A transfer function model with relocated zeros is developed for the flexible manipulator bonded with strain sensors and piezoelectric actuator. The mathematical model between the input voltage of the piezoelectric actuator and the output voltage of the strain sensors is established through sweep excitation, the fitness can achieve up to 94.8%. Furthermore, the close coincidence between the identified model and the experimental system is verified through a multi-frequency signal excitation. Then, state equations of the flexible manipulator system are derived. A poles assignment method with the characteristics of the shortest displacement distance and desired close-loop damping ratio is proposed. The effectiveness of the proposed control method is validated by simulation and experiments with different locations of closed-loop poles. Experimental results show that elastic vibrations of the link caused by the sweep and external disturbance excitation are effectively suppressed using the poles assignment controller. Consequently, the proposed method of experimental identification and poles assignment control is feasible and effective.
娄军强1, 廖江江1, 李国平1, 杨依领2, 魏燕定2. 压电柔性机械臂的实验辨识及最优极点配置抑振控制[J]. 振动与冲击, 2017, 36(16): 18-25.
Lou Junqiang1, Liao Jiangjiang1, Li Guoping1, Yang Yiling2, Wei Yanding2. Experimental Identification and Vibration Suppression of a Piezoelectric Flexible Manipulator Using Optimal Poles Assignment Method. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(16): 18-25.
[1] 娄军强,魏燕定,杨依领, 等. 智能柔性构件振动改进多模态正位置反馈控制[J]. 振动与冲击, 2015, 34(10): 115-120.
Lou Junqiang, Wei Yanding, Yang Yiling, et al. Modified multi-mode positive position feedback controller for active vibration control of a smart flexible structure[J]. Journal of Vibration and Shock, 2015, 34(10): 115-120. (In Chinese)
[2] 李生权, 季宏丽, 裘进浩, 等. 基于加速度反馈和自抗扰的加筋壁板结构复合振动控制[J]. 振动工程学报, 2012, 25(5): 532-539.
Li Shengquan, Ji Hongli, Qiu Jinhao, et al. Composite vibration control for a stiffened panel structure using acceleration feedback and active disturbance rejection[J]. Journal of Vibration Engineering, 2012, 25(5): 532-539. (In Chinese)
[3] 邱志成,许燕飞. 基于自适应RBF模糊神经网络的旋转柔性铰接梁的振动控制[J]. 振动与冲击, 2016, 35(7): 89-95.
Qiu Zhicheng, Xu Yanfei. Vibration control of a rotating two-connected flexible beam using RBF-based self-adaptive fuzzy neural network[J]. Journal of Vibration and Shock, 2016, 35(7): 89-95. (In Chinese)
[4] H.N. Rahimi, M. Nazemizadeh, Dynamic analysis and intelligent control techniques for flexible manipulators: a review[J]. Advanced Robotics, 2014, 28(2): 63-76.
[5] 王斌, 邱志成, 张宪民, 等. 气动驱动柔性臂自适应模糊振动控制[J]. 机械工程学报, 2013, 49(11): 50-60. (In Chinese)
Wang Bin, Qiu Zhicheng, Zhang Xianmin, et al. Adaptive Fuzzy Vibration Control for Flexible Manipulator Based on Pneumatic Driving[J]. Chinese Journal of Mechanical Engineering, 2013, 49(11): 50-60. (In Chinese)
[6] Kiang, C.T., Spowage, A., Yoong, C.K.: Review of Control and Sensor System of Flexible Manipulator[J]. Journal of Intelligent and Robotic Systems, 2014, 77(1): 187-213.
[7] Sethi V, Franchek M A, Song G. Active multimodal vibration suppression of a flexible structure with piezoceramic sensor and actuator by using loop shaping[J]. Journal of Vibration and Control, 2011, 17(13): 1994–2006.
[8] MorrisDriels著, 金爱娟, 李少龙, 李航天译. 线性控制系统工程[M]. 北京: 清华大学出版社, 2005.
MorrisDriels, Jin Aijuan, Li Shaolong, Li Hangtian. Linear control systems engineering[M]. Beijing: Tsinghua University Press, 2005. (In Chinese)
[9] Sethi V, Song G. Pole-placement vibration control of a flexible composite I-beam using piezoceramic sensors and actuators[J]. Journal of Thermoplastic Composite Materials, 2006, 19(3): 293-307.
[10] Sethi V, Song G. Multimodal vibration control of a flexible structure using piezoceramic sensor and actuator[J]. Journal of Intelligent Material Systems and Structures, 2008, 17: 573-582.
[11] Rahman T, Darus I Z M. Active vibration control using pole placement method of a flexible plate structure optimised by genetic algorithm[C]. IEEE Conference on Control, Systems and Industrial Informatics, 2012: 92-97.
[12] Kuo T C, Huang Y J, Chen C Y, et al. Robust Pole Placement in a Specified Trapezoid Region for Flexible Manipulators[J]. Journal of Optimization Theory and Applications, 2013, 159(2): 507-517.
[13] Preumont A. Vibration Control of Active Structures: An Introduction, 3rd Edition[M]. Berlin: Springer, 2011.
[14] Nobahari H, Kordkheili S A H, Afshari S S. Hardware-in-the-loop optimization of an active vibration controller in a flexible beam structure using evolutionary algorithms[J]. Journal of Intelligent Material Systems and Structures, 2014, 25(10): 1211-1223.
[15] Bu Xiongzhu, Ye Lin, Su Zhongqing, et al. Active control of a flexible smart beam using a system identification technique based on ARMAX[J]. Smart Materials and Structures, 2003, 12(5): 845-850.
[16] Orszulik R R, Shan J. Experimental study on active vibration control using genetic algorithm-based system identification and optimized positive position feedback[J]. Smart Materials and Structures, 2012, 21(12): 125014.
[17] 庞中华, 崔红. 系统辨识与自适应控制MATLAB仿真[M]. 北京: 北京航空航天大学出版社, 2012.
Pang Zhonghua, Cui Hong. System identification and adaptive control using Matlab[M]. Beijing: Beihang University Press, 2012. (In Chinese)
