Free Vibration of the Embedded Co-Cured Composite Sandwich Plate
ZHAI Yan-chun1,2 LIANG Sen2 FU Xiaojing2
1. College of Mechanical Engineering, Wei fang University of Science and Technology, Shandong Shouguang 262700,China;
2. College of Mechanical Engineering, Qingdao Technological University, Shandong Qingdao 266000,China
Abstract:Analysis of Free Vibration of thin composite sandwich plate with four simply supported edges and (0o/90o/0o) laying-up was conducted using the Navier solution based on the first-order ZIG-ZAG theory and constant complex model.On the condition that thinkness of total plate remain unchanged,nature frequency that tended to go from descent to ascent with the increase of the thickness of surface layer presented a concave parabolic distribution; loss factor that tended to go from increase to decrease with the ascent of the thickness of surface layer presented a conves parabolic distribution.So symmetrical structure sandwich plate is the optimal structure design. On the condition that thinkness and location of viscoelastic layer keep constant,the natural frequencies can be improved with the increase of thickness of surface layer; loss factor tended to go from increase to decrease with the ascent of the thickness of surface layer and presented a parabolic distribution. All of this can provide the reference for the optimal design of sandwich plate structure.
[1] 梁森,梁磊,米鹏. 嵌入式共固化复合材料阻尼结构的新进展[J].应用力学学报, 2010, 27(4):767-771.
Liang Sen, Liang Lei,Mi Peng. New development of the embedded and co-cured composite damping structres[J]. Chinese Journal of Applied Mechanics, 2010, 27(4):767-771.
[2] 许广举,陈庆樟,李学智,等.复合阻尼材料降低柴油机噪声的试验研究[J]. 机械设计与制造, 2015(5):160-163.
Xu Guang-ju,Chen Qing-zhang,Li Xue-zhi et al.Experimental Study on reducing noise of diesel engine by composite damping material[J].Mechinery Design ﹠Manufacture, 2015(5):160-163.
[3] 李祚军, 张娟, 王佩艳,等. T700/3234碳纤维层合板的拉伸疲劳特性分析[J]. 机械设计与制造, 2013(10):4-6.
Li Zuo-jun,Zhang Juan,Wang Pei-yan et al.Tensile and fatigue properities of T700/3234 carbon fiber reinforced composite laminates[J]. Mechinery Design ﹠Manufacture, 2013(10):4-6.
[4] Yang C, Jin G, Ye X, et al. A modified Fourier–Ritz solution for vibration and damping analysis of sandwich plates with viscoelastic and functionally graded materials[J]. International Journal of Mechanical Sciences, 2016, 106:1-18.
[5] 杨坤, 梅志远,李华东.粘弹性芯材复合材料夹芯板的自由振动分析[J].海军工程大学学报, 2012, 24(5):6-11.
YANG Kun,MEI Zhi-yuan. Analysis of free vibration of composite sandwich with viscoelastic core layer[J]. Journal of Naval University of Engineering, 2012, 24(5):6-11.
[6] Tu T M, Le N T, Quoc T H. Finite element modeling for bending and vibration analysis of laminated and sandwich composite plates based on higher-order theory[J].
Computational Materials Science, 2010, 49(4):S390–S394.
[7] 胡明勇, 王安稳. 纤维增强粘弹性复合材料层合板的自由振动和应力分析[J]. 工程力学, 2010, 27(8):10-14.
HU Ming-yong,WANG An-wen.Free vibration and stresses analysis of fiber-reinforced viscoelastic composite laminated plates[J]. Engineering Mechanics, 2010, 27(8):10-14.
[8] Araújo A L, Soares C M M, Soares C A M. A Viscoelastic Sandwich Finite Element Model for the Analysis of Passive,Active and Hybrid Structures[J]. Applied Composite Materials, 2010, 17(5):529-542.
[9] Alipour M M. An analytical approach for bending and stress analysis of cross/angle-ply laminated composite plates under arbitrary non-uniform loads and elastic
foundations[J]. Archives of Civil & Mechanical Engineering, 2016, 16(2):193-210.
[10] Arikoglu A, Ozkol I. Vibration Analysis of Composite Sandwich Plates by the Generalized Differential Quadrature Method[J]. Aiaa Journal, 2012, 50(3):620-630.
[11] P. Cupial, Niziol J. Vibration and damping analysis of a three-layered composite plate with a viscoelastic mid-layer[J]. Journal of Sound & Vibration, 1995, 183(1):99-1