Numerical simulation on the behaviour of aramid fiber laminates normally impacted by projectiles
JIA Baohua1 ,LI Ge1,XU Zhenyang2,GUO Lianjun2
1. College of Civil Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, China;
2. College of Mining Engineering, University of Science and Technology Liaoning, Anshan 114051, China
A finite element model of projectiles normally impacting aramid fiber laminates was established by using Abaqus/Explicit software, and the reliability of the model was verified by comparing the results with those in existing literatures, then, the critical velocity of projectiles, the ballistic performance and the failure mechanism of the aramid fiber laminates were analyzed with three different shapes of projectiles normally impacting the aramid fiber laminates. The results show that the critical velocity of conical projectile is the smallest, the velocity of cylindrical projectile is the largest, and, the critical velocity of spherical projectile is something in between; with the same initial velocity, the conical projectile does the largest execution, the spherical projectile does the second, and the cylindrical projectile does the smallest; the failure mechanism of aramid fiber laminates is related to the shape and impact velocity of projectiles. The research results could provide references to the design and optimization of aramid fiber laminates and projectiles.
[1] 陈磊,徐志伟,李嘉禄,等. 防弹复合材料结构及其防弹机理[J]. 材料工程,2010, (11):94-100.
CHEN Lei, XU Zhi-wei, LI Jia-lu, et al. Structure and bullet-proof mechanism of ballistic composites [J]. Journal of Materials Engineering, 2010, (11):94-100.
[2] Budiger H. Ballistic protective fabrics-past and future [C]//Proceedings of the 34th International SAMPE Technical Conference. Baltimore: 2002. 499-505.
[3] Kasano H. Recent advance in high-velocity impact perforation of fiber composite laminates [J]. Jsme International Journal, 1999,42(2):147-157.
[4] Hearle J W S, Leech C M. Ballistic impact resistance of multi-layer textile fabrics [R]. AD-A128064, England: University of Manchester Inst. of Science and Technology, 1983.
[5] 周传雷. 我国芳纶产业发展现状[J]. 化学工程师, 2010, (12):47-49.
ZHOU Chuan-lei. Domestic development status of aramid fiber industry [J]. Chemical Engineer, 2010, (12):47-49.
[6] 钱伯章.芳纶的国内外发展现状[J].化工新型材料,2007,35(8):26-27.
QIAN Bo-zhang. Current developing situation of aramid fiber at home and abroad [J]. New Chemical materials, 2007, 35(8):26-27.
[7] 秦建兵,韩志军,刘云雁, 等. 复合材料层合板侵彻行为的研究[J]. 振动与冲击, 2013,32(24):122-126.
QIN Jian-bing, HAN Zhi-jun, LIU Yun-yan, et al. Penetration behavior of composite laminated plates [J]. Journal of Vibration and Shock, 2013, 32(24):122-126.
[8] Lopez-Puente J, Zaera R, Navarro C. Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates [J].Composites Part A-Applied Science and Manufacturing, 2008, 39(2):374-387.
[9] Tan V B C, Lim C T, Cheong C H. Perforation of high-strengh fabric by projectiles of different geometry [J]. International Journal of Impact Engineering, 2003, 28(2):207-222.
[10]马小敏.芳纶纤维层合板的冲击动力学行为[D].太原:太原理工大学,2015.
[11]王元博,王肖钧,胡秀章,等. Kevlar层合材料抗弹性能研究[J].工程力学,2005,22(3):76-81.
WANG Yuan-bo, WANG Xiao-jun, HU Xiu-zhang, et al. Experimental study of ballistic resistance of Kevlar [J]. Engineering Mechanics, 2005, 22(3):76-81.