Dynamic characteristics of an inclined inerter-based vibration isolator with geometric nonlinearity
WANG Yong1, WANG Ruochen1, MENG Haodong2
1. Automotive Engineering Research Institute, Jiangsu University, Zhenjiang 212013, China;
2. School of Mechanical and Vehicle Engineering, Changzhou Institute of Technology, Changzhou 213002, China
Abstract:Here, an inclined inerter-based vibration isolator with geometric nonlinearity was proposed.It was shown that the force of the inerter in moving direction of its bearing mass is nonlinear and the acceleration term in the system’s dynamic equation is also nonlinear.The system’s dynamic response was obtained using the harmonic balance method and then compared with the numerical solution.The vibration isolation performance of the inclined inerter-based vibration isolator was evaluated with peak dynamic displacement, peak transmissibility and vibration isolation frequency band.It was compared with the vibration isolation performance of an equivalent linear vibration isolator.The results showed that when the excitation force amplitude is smaller, compared with the linear vibration isolator, the inclined inerter-based vibration isolator has a smaller force peak transmissibility, a wider vibration isolation frequency band, and a larger peak dynamic displacement.
王勇1,汪若尘1,孟浩东2. 一种具有几何非线性的斜置惯容式隔振器动态特性研究[J]. 振动与冲击, 2018, 37(21): 184-189.
WANG Yong1, WANG Ruochen1, MENG Haodong2. Dynamic characteristics of an inclined inerter-based vibration isolator with geometric nonlinearity. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(21): 184-189.
[1] Alabuzhev P, Gritchin A, Kim L, et al. Vibration Protecting and Measuring Systems with Quasi-Zero Stiffness[M]. Hemisphere, New York, 1989.
[2] Carrella A, Brennan M J, Waters T P. Static analysis of a passive vibration isolation with quasi zero-stiffness characteristic[J]. Journal of Sound and Vibration, 2007, 301(3):678 689.
[3] 王勇, 李舜酩, 程春等. 立方速度反馈控制的准零刚度隔振器动力学特性分析[J]. 振动工程学报, 2016, 29(2): 305-313.
WANG Yong, LI Shun-ming, Cheng Chun et al. Dynamic analysis of a quasi-zero-stiffness vibration isolator with cubic velocity feedback control[J]. Journal of Vibration Engineering, 2016, 29(2): 305-313.
[4] 王勇, 李舜酩, 程春. 基于准零刚度隔振器的车-座椅-人耦合模型动态特性研究[J]. 振动与冲击, 2016, 35(15): 190-196.
WANG Yong, LI Shun-ming, Cheng Chun. Dynamic characteristics of a vehicle-seat-human coupled model with quasi-zero-stiffness isolators[J]. Journal of Vibration and Shock, 2016, 35(15): 190-196.
[5] Tang B, Brennan M J. A comparison of two nonlinear damping mechanisms in a vibration isolator[J]. Journal of Sound and Vibration, 2013, 332(3): 510-520.
[6] 孙靖雅, 华宏星, 肖锋等. 非线性迟滞阻尼对隔振系统力传递特性影响[J]. 振动与冲击, 2014, 33(10): 131-136.
SUN Jing-ya, HUA Hong-xing, XIAO Feng et al. Influence of nonlinear hysteretic damping on force transmissibility of a vibration isolation system[J]. Journal of Vibration and Shock, 2014, 33(10): 131-136.
[7] Smith M C. Synthesis of mechanical networks: The inerter[J]. IEEE Transactions on Automatic Control, 2002, 47(10): 1648-1662.
[8] 陈龙, 张孝良, 聂佳梅等. 基于半车模型的两级串联型 ISD 悬架性能分析[J]. 机械工程学报, 2012, 48(6): 102-108.
CHEN Long, ZHANG Xiao-liang, NIE Jia-mei et al. Performance analysis of two-stage series-connected inerter-spring-damper suspension based on half-car model[J]. Journal of Mechanical Engineering, 2012, 48(6): 102-108.
[9] 陈龙, 杨晓峰, 汪若尘等. 基于二元件ISD结构隔振机理的车辆被动悬架设计与性能研究[J]. 振动与冲击, 2013, 32(6): 90-95.
CHEN Long, YANG Xiao-feng, WANG Ruo-chen et al. Design and performance study of vehicle passive suspension based on two-element inerter-spring-damper structure vibration isolation mechanism[J]. Journal of Vibration and Shock, 2013, 32(6): 90-95.
[10] 葛正, 王维锐. 车辆主动惯容式动力吸振悬架系统研究[J]. 振动与冲击, 2017, 36(1): 167-174.
GE Zheng,WANG Wei-rui. Vehicle active ISD-DVA suspension system[J]. Journal of Vibration and Shock, 2017, 36(1): 167-174.
[11] 孙晓强, 陈龙, 汪少华等. 基于惯容器的铁道车辆悬挂性能提升研究[J]. 铁道学报, 2017, 39(2): 32-38.
SUN Xiao-qiang, CHEN Long, WANG Shao-hua et al. Research on performance benefits in railway vehicle suspension employing inerter[J]. Journal of the China Railway Society, 2017, 39(2): 32-38.
[12] Lazar I F, Neild S A, Wagg D J. Using an inerter-based device for structural vibration suppression[J]. Earthquake Engineering & Structural Dynamics, 2014, 43(8): 1129-1147.
[13] Hu Y, Chen M Z Q. Performance evaluation for inerter-based dynamic vibration absorbers[J]. International Journal of Mechanical Sciences, 2015, 99: 297-307.
[14] Chen M Z Q, Hu Y, Huang L et al. Influence of inerter on natural frequencies of vibration systems[J]. Journal of Sound and Vibration, 2014, 333(7): 1874-1887.
[15] Hu Y, Chen M Z Q, Shu Z et al. Analysis and optimisation for inerter-based isolators via fixed-point theory and algebraic solution[J]. Journal of Sound and Vibration, 2015, 346: 17-36.
[16] Wang Y, Li S, Neild S A et al. Comparison of the dynamic performance of nonlinear one and two degree-of-freedom vibration isolators with quasi-zero stiffness[J]. Nonlinear Dynamics, 2017, 88(1): 635-654.