基于应变模态参数的结构瞬态载荷识别方法研究

摘要
图/表
参考文献(14)
相关文章 (15)

全文: PDF (1536 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要本文主要针对结构受到的瞬态载荷的识别问题进行研究，提出了基于应变响应和应变模态参数的载荷识别方法。首先，假设时间步长内载荷不变，利用Duhamel积分导出了基于位移响应的载荷识别模型，提出了相应的正则化方法；其次，给出了利用位移模态振型和应变模态振型将应变响应转换为位移响应的转换关系式，从而实现基于应变响应的瞬态载荷识别。该方法避免了应变到位移的空间积分过程，并通过正则化方法，保证转换过程的鲁棒性；最后，通过海洋卫星的仿真实验算例对所述方法进行验证，并分析解决了单点激励时识别结果失真的问题。同时通过自由梁实验锤击实验对所述方法实际效果进行论证。结果表明所提出的识别方法对瞬态载荷具有很好的识别效果，所推导的应变-位移转换关系具有较好的精度和鲁棒性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

关键词 ：瞬态载荷, 应变响应, 应变模态参数, 正则化

Abstract：The identification of transient loads was focused and a load identification model was proposed based on strain response and strain modal parameters. Assuming that the load is constant in a time step, the load recognition model based on displacement response was derived via the Duhamel integral and the corresponding regularization method was presented. The conversion relation between strain responses and displacement responses was introduced by using the displacement mode and the strain mode, which results in a strain-based load identification method. The proposed method avoids the spatial integral process from strain to displacement and the stability of the conversion process is ensured by introducing the regularization method. The simulation of a marine satellite was used to demonstrate the method. The distortion of recognition under single point excitation was analysed. The practical effect of the method was demonstrated by a free beam hammering experiment. The results prove that the recognition model has a good identification effect on the transient load, and the conversion precision and robustness of the strain-displacement conversion relation are ideal.

Key words： impact load strain response strain modal parameters regularization

收稿日期: 2017-09-01 出版日期: 2019-03-15

引用本文:

周玙，刘莉，周思达，王大宇邵玉佩. 基于应变模态参数的结构瞬态载荷识别方法研究[J]. 振动与冲击, 2019, 38(6): 199-205.
ZHOU Yu,LIU Li,ZHOU Sida,WANG Dayu,SHAO Yupei. Transient load identification of structural dynamic systems based on strain modal parameters. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(6): 199-205.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2019/V38/I6/199

[1]周晚林. 压电智能结构冲击荷载及损伤识别方法的研究[D].南京航空航天大学,2005.
Zhou Wan-lin Research on Impact Load and Damage Identification Methods For piezoelectric Smart Structures
[D].Nanjing University of Aeronautics and Astronautics, 2005
[2] 蔡元奇. 时域内动态载荷识别理论及实施技术研究[D].武汉大学,2004.
Cai Yuanqi Theory and applying technique study on idenitficaiton method for dynamic Loads in time domain [D] Wuhan university,2004
[3] 严刚,周丽. 冲击时刻未知情况下复合材料结构冲击载荷识别[J]. 中国机械工程,2009,(01):99-103.
Yan Gang, Zhou Li Impact Identification for Composite Structure with Unknown Impact Time[J]. Chinese Journal of Mechanical Engineering, 2009,(01):99-103.
[4]刘杰. 动态载荷识别的计算反求技术研究[D].湖南大学,2011.
Liu Jie. Research on computational inverse techniques in dynamic load identification[D].Hunan university,2011
[5] 毛伯永,谢石林,张希农. 冲击载荷识别的瞬态统计能量分析方法[J]. 振动与冲击,2013,(14):46-51+63.
Mao Bo-yong, Xie Shi-lin, Zhang Xi-nong. Identification of impact load based on transient statistical energy analysis method[J]. Journal of Vibration and Shock, 2013,(14):46-51+63.
[6] 张磊,曹跃云,杨自春,何元安. 总体最小二乘正则化算法的载荷识别[J]. 振动与冲击,2014,(09):159-164.
Zhang Lei, Cao Yue-yun, Yang Zi-chun, He Yuan-an. Load identification using CG-TLS regulariztion algorithm[J]. Journal of Vibration and Shock, 2014,(09):159-164.
[7]张方,朱德懋,张福祥. 动载荷识别的时间有限元模型理论及其应用[J]. 振动与冲击,1998,(02):4-7+96.
Zhang Fang, Zhu De-mao, Zhang Fu-xiang. Dynamic finite element model for dynamic load identification and its application[J]. Journal of Vibration and Shock, 1998,(02):4-7+96.
[8] 周小陈. 基于光纤布拉格光栅传感器的结构动力学实验与参数辨识研究[D].北京理工大学,2015.
Zhou Xiao-chen. Study on the structural dynamic testing and modal parameters estimation based on fiber bragg grating sensors[D]. Beijing Institute of Technology,2015.
[9]马超,华宏星. 一种基于新的正则化技术的冲击载荷识别法[J]. 振动与冲击,2015,34(12):164-168+181.
Ma Chao, Hua Hong-xing Impact force identification based on improved regularization technique[J]. Journal of Vibration and Shock, 2015,34(12):164-168+181.
[10] 吴蓓蓓,黄海,陈珅艳,吴文瑞. 使用解析目标分流策略的海洋卫星多学科优化[J]. 宇航学报,2013,(01):9-16.
Wu Bei-bei，Huang Hai，Chen Shen-yan, Wu Wen-rui. Multi-disciplinary design optimization of ocean satellites based on analytical target cascading strategy[J]. Journal of Astronautics, 2013,(01):9-16.
[11] 李德葆. 实验应变/应力模态分析若干问题的进展评述[J]. 振动与冲击, 1996, 15(1): 13-17.
Li De-bao. A review of some problems in experimental strain / stress modal analysis[J]. Journal of Vibration and Shock, 1996, 15(1): 13-17.
[12]陈晗,宋汉文. 应变模态分析及其与位移模态的关系研究[J]. 噪声与振动控制,2016,(04):7-13.
Chen Han, Song Han-wen. Analysis of strain modals and the relationship between the strain modals and displacement modals[J]. Noise and Vibration Control, 2016,(04):7-13.
[13]朱斯岩,朱礼文. 运载火箭动态载荷识别研究[J].,2008,(02):135-139.
Zhu Si-yan, Zhu Li-wen. Research on Dynamic Load Identification of Launch Vehicle[J]. Journal of Vibration Engineering, 2008,(02):135-139.
[14] Bin Xu, Jia He, Roger Rovekamp, Shirley J .Dyke. Structural parameters and dynamic loading identiﬁcation from incomplete measurements: Approach and validation[J]. Mechanical Systems and Signal Processing . 2012:244–257