In order to enrich the design theory of stable pressure chamber and solve the problem of insufficient life of the diaphragm between stable pressure chamber and diaphragm pump fluid,here,ZMB240 piston diaphragm pump was taken as the study object to establish a simplified diaphragm pump’s 3-D finite element analysis model. With FSI module of Workbench platform,two-way fluid-solid interaction analyses were performed for the diaphragm pump under working conditions with initial pressure of 0.3 MPa,0.4 MPa,0.5 MPa,0.6 MPa and 0.7 MPa,respectively to monitor the diaphragm’s maximum displacement and equivalent stress variations within a cycle. The simulation results showed that the diaphragm deformation decreases with increase in initial pressure of stable pressure chamber,and all diaphragm deformations under different initial pressures reach the maximum at time t=0.031 8 s; stress fluctuation of the diaphragm is great within a motion period,and the maximum stress is 4 times of the minimum one,the diaphragm end edge is the stress concentration area. Through studying,a reasonable numerical simulation method to predict stress and displacement variations of stable pressure chamber diaphragm was obtained to guide the design of stable pressure chamber diaphragm and provide a reference for stable pressure chamber design of diaphragm pumps.
[1] 凌学勤.往复式活塞隔膜泵的技术参数及核心技术[J]. 机电产品开发与创新，2006,19（5）：45-48.
Ling Xueqin．The technical parameter and core technology of reciprocating piston diaphragm pump[J].Development＆Innovation of Machinery＆Electrical Products,2006，19( 5) : 45－48．
[2] ANG M，FREUND J B，LELE S K． Computational prediction of flow-generated sound［J］． Annual Review of Fluid Mechanics，2005，38(1):483-512．
[3] Rotodyna micpumps-hydraulic performance accepta-ance tests-grades 1 and 2:ISO 9906—1999 [S]．American National Standards Institute ，2007．
[4] Charlton D，Yang J． A Review of Methods to Characterize Rubber Elastic Behavior for Use in Finite Element Analysis［J］．Rubber Chemical and Technology，1994，67( 3) : 481-503．
[5] ABAQUS．Theory Manual［M］． Botha: ABAQUS Inc，2003．
[6] 瞿文忠．隔膜泵隔膜破裂的分析原因[J]．石油/化工通用机械，2010，3：46-47．
Qu Wenzhong．Analysis of Diaphragm Fracture of diaphragm[J]．GM in Petroleum & Chemical Industry，2010，3：46-47．
[7] 李杰，周建荣，卢树杰．泵类机械密封失效原因及改进综述[J]．化学工程与装备，2016，9 : 211-213．
Li Jie，Zhou JIanrong，Lu Shujie.Failure reason and improvement summary of pump mechanical seal[J].Chemical Engineering & Equipment，2016，9 : 211-213．
[8] Hibbit，Karlsson & Sorensen（HKS）Inc. ABAQUS Theory Manual：Version 6. 7[M]. USA：HKS Inc. ，2007.
[9] Nam D N C，II Y J，Kwan A K. A Novel Design Technique for IPMC Diaphragm in Micro-pump Application[A]. 2012 12th International.
[10] 聂侥，程玉强，吴建军等．往复活塞泵工作特性影响因素分析[J]．国防科技大学学报，2016,38（6）：82-87.
Nie Yao，Cheng Yuqiang，et al．Dynamic characteristics and influence factors analysis of reciprocating pump-fed propulsion system. [J].Jouranl of national，2016,38（6）：
82-87.
[11] Van Rijswick I R，Van Rhee I C．Fluid structure interaction in piston diaphragm pumps［C］∥Joint EUROMECH / ERCOFTAC Colloquium 549 “Immersed Boundary Methods: Current Status and Future Research Directions”Leiden．Netherlands:［s.n.］，2013．
[12] 王松林，谭磊，王玉川.离心泵瞬态空化流动及压力脉动特性[J].振动与冲击，2013,32（22）：168-173.
Wang Songlin，Tan Lei，Wang Yuchuan.Characteristics of transient cavitation flow and pressure fluctuation for a centrifugal pump[J].Journal of Vibration and Shock，2014，
51（2）:13-15.
[13] 凌雪勤，张伟．大型隔膜泵橡胶隔膜的有限元分析[J]．中国机械工程，2011，22（15）：1891~1822.
Ling Xueqin, Zhang Wei. Finite Element Analysis of Large Diaphragm Pump Rubber Diaphrage[J]. The Chinese mechanical engineering,2011,22(15):1819~1822．
[14] 张洪生，史有程，徐波．隔膜泵液力特性的数值模拟[J].排灌机械工程，2014，32（11）：984-989.
Zhang Hongsheng, Shi Youcheng,XuBo .Numerical simulation on hydraulic characteristic of diaphragm pump[J].Journal of Drainage and Irrigation Machinery Engineering,2014,32(11):984-989．
[15] Lee B,Rivin E.Finite Element Analysis of Load deflection and Characteristics of Compressed Rubber Components for Vibration Contrpl Devices[J].Jounrnal of Mechanical Design,1996,11（8）：328-335 ．
[16] 刘雪美，张晓辉，侯存良．喷杆喷雾机风助风筒流场分析与结构优化[J].农业机械学报，2011,42（4）：70-75.
Liu Xuemei，Zhang Xiaohui，Hou Cunliang.Air Flow Simulation and Flow Field Optimization for Airduct of Air-assisted Boom Sprayer. [J].Transactions of the Chinese
Society for Agricultural Machinery, 2011, 42(4): 70－75.
[17] 张亮，何环宇，张学伟等．垂直轴水轮机单向流固耦合数值模拟研究[J].华中科技大学学报（自然科学版），2014，42（5）：80-84．
Zhang Liang，He Huanyu，Zhang Xuewei，et al．One way fluid and structure interaction numercial analysis of vertical axis tidal turbine. [J].J.Huazhong Univ.of Sci.&Tech.（Natural Science Edition）, 2014, 42(5): 80-84．
[18] 刘厚林，徐欢，吴贤芳等.基于流固耦合的导叶式离心泵强度分析[J].振动与冲击，2013，32（12）：27-30．
Liu Houlin，Xu Huan，Wu Xianfang.Strength analysis of a diffuser pump based on fluid-structure interaction[J]. Journal of Vibration and Shock, 2013，32（12）：27-30．
[19] 高俊杰，李银霞.小型隔膜真空泵橡胶隔膜的ANSYS 有限元分析[J]，真空，2014,51（2）:13-15.
Gao Junjie，Li Yinxia . Finite element analysis of rubber diaphragm of the small diaphragm vacuum pump by ANSYS[J], Vacuum ，2014,51（2）:13-15.
