渐变截面背腔微穿孔管消声器声传递特性分析

摘要
图/表
参考文献(17)
相关文章 (15)

全文: PDF (1191 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要为提高微穿孔管消声器的性能，研究了背腔结构对消声器性能的影响。基于一维声传播理论和微穿孔结构吸声理论，推导了渐变截面背腔微穿孔管消声器的声传播理论模型，利用传递矩阵法求出声学传递损失，并将理论计算结果与有限元仿真分析结果进行了比较，在等容积条件下分析了结构参数对传递损失的影响。结果表明：微穿孔管消声器的传递损失曲线在背腔的轴向模态频率处有极小值；对于锥形体结构背腔，增加锥度能够拓宽吸声频带，提高背腔轴向共振频率处的极小值；对于弧形体结构背腔，减小弧形半径能够提高消声器的低频处的吸声效果。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	侯九霄1
	2
	朱海潮1
	2
	毛荣富1
	2

关键词 ：渐变截面背腔, 微穿孔管消声器, 平面波理论, 传递损失

Abstract：In order to improve the performance of a micro-perforated tube muffler (MPTM), the influence of cavity structure on the transmission loss of the MPTM was discussed.The acoustic transmission model for gradually changed back cavity micro-perforated tube muffler (GCBCMPTM) was established based on the one-dimensional plane wave theory and micro-perforated absorption theory.The transmission loss (TL) of the GCBCMPTM was solved with the transfer-matrix method.The calculated values were compared with the three-dimensional finite element model (FEM) acoustic simulation results.The influence of structure parameters of the back cavity on the TL was analyzed.The results show that minimums of the TL curve appear at the axial acoustic mode frequencies.For conical back cavity, when the taper increases, the absorption bandwidth will be expanded, and the values of minimums at the axial mode frequencies will be raised as well; while, for circular arc back cavity, when the radius of curvature decreases, the absorption bandwidth will be expanded, and the absorption effects in low frequency will be improved as well.

Key words： gradual change back cavity micro-perforated tube muffler plane wave theory transmission loss

收稿日期: 2018-01-23 出版日期: 2019-07-15

引用本文:

侯九霄1,2，朱海潮1,2，毛荣富1,2. 渐变截面背腔微穿孔管消声器声传递特性分析[J]. 振动与冲击, 2019, 38(14): 189-194.
HOU Jiuxiao1,2，ZHU Haichao1,2，MAO Rongfu1,2. Theoretical analysis on the transmission loss of a micro-perforated tube muffler with gradually changed back cavity. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(14): 189-194.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2019/V38/I14/189

[1] 马大猷.微穿孔板吸声结构的理论和设计[J].中国科学,1975,18(1):38-50.
MA Da-you. Theory and design of micro-perforated panel absorber [J]. Science China,1975,18(1):38-50.
[2] Liu J, Hua X, Herrin D W. Estimation of effective parameters for micro-perforated panel absorbers and applications[J]. Applied Acoustics, 2013, 75(1):86-93.
[3] Bravo T, Maury C. Enhancing sound absorption and transmission through flexible multi-layer micro-perforated structures.[J]. Journal of the Acoustical Society of America, 2013, 134(5):3663-3673.
[4] Bravo T, Maury C, Pinhède C. Optimising the absorption and transmission properties of aircraft micro-perforated panels, Applied Acoustics.79 (2014) 47–57.
[5] Bravo T, Maury C, Pinhède C. Absorption and transmission of boundary layer noise through flexible multi-layer micro-perforated structures[J]. Journal of Sound & Vibration, 2017.
[6] Sullivan J W, Crocker M J. Analysis of concentric‐tube resonators having unpartitioned cavities[J]. Acoustical Society of America Journal, 1978, 64(1):207-215.
[7] 季振林. 直通穿孔管消声器声学性能计算及分析[J]. 哈尔滨工程大学学报, 2005, 26(3):302-306.
JI Zhen-lin. Acoustic attenuation performance calculation and analysis of straight-through perforated tube silencers[J]. Journal of Harbin Engineering University, 2005, 26(3):302-306.
[8] 徐贝贝, 季振林. 穿孔管阻性消声器声学特性的有限元分析[J]. 振动与冲击,2010,29(3):58-62.
XU Bei-bei, JI Zhen-lin. Analysis on acoustical performance of perforated tube muffler by FEM [J]. Journal of Vibration and Shock,2010,29(3):58-62.
[9] 张孟浩, 左曙光, 相龙洋,等. 双层微穿孔管消声器传声损失理论计算与分析[J]. 中南大学学报(自然科学版), 2015,46(2):505-511.
ZHANG Meng-hao, ZUO Shu-guang, XIANG Long-yang, et al. Transmission loss theoretical calculation and analysis of double-layer micro-perforated muffler [J]. Journal of Central South University (Science and Technology), 2015, 46(2): 505-511.
[10] 左曙光,龙国,吴旭东,相龙洋,张孟浩,胡佳杰.考虑微穿孔管消声器结构参数的共振频率预估模型[J].振动与冲击,2015,34(10):173-178.
ZUO Shu-guang, LONG Guo, WU Xu-dong, et al. Resonant frequency predicting model for a micro-perforated tube muffler considering its structural parameters [J]. Journal of Vibration and Shock, 2015,34(10):173-178.
[11] Allam S, Åbom M. A new type of muffler based on micro-perforated tubes [J]. Journal of Vibration & Acoustics, 2011, 133(3):470-476.
[12] Zhao H J, Deng Z X. Effect factors analysis of flow noise generation from perforated duct muffler element [J]. Advanced Materials Research, 2012, 346(3): 204-209.
[13] Shi X, Mak C M. Sound attenuation of a periodic array of micro-perforated tube mufflers[J]. Applied Acoustics, 2017, 115:15-22.
[14] 马大猷. 微穿孔板结构的设计[J]. 声学学报, 1988,13(3):16-22.
MAA Dah-you. Design of micro-perforated panel constructions[J]. ACTA Acustica,1988,13(3):16-22.
[15] 马大猷. 微穿孔板吸声体的准确理论和设计[J]. 声学学报, 1997,22(5):385-394.
MAA Dah-you. General theory and design of micro-perforated panel absorbers[J]. ACTA Acustica, 1997,22(5):385-394.
[16] Bravo T, Maury C, Pinhède C. Optimisation of micro-perforated cylindrical silencers in linear and nonlinear regimes[J]. Journal of Sound & Vibration, 2016, 363:359-379.
[17] Huang S, Li S, Wang X, et al. Micro-perforated absorbers with incompletely partitioned cavities[J]. Applied Acoustics, 2017, 126:114-119.