高能气体冲击载荷作用下高压容器仓排放孔膜片损伤模式及机理研究

摘要
图/表
参考文献(14)
相关文章 (15)

全文: PDF (1698 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对高压容器仓内高能爆炸气体对排放口膜片结构毁伤模式无法准确有效预估，常出现提前破膜和不破模危险情况，进而对含预制损伤孔洞Q235钢结构膜片在爆炸冲击载荷作用下的宏细观损伤特性进行研究。基于高压爆炸装置，对含预制损伤孔洞Q235钢结构膜片抗爆毁伤效应进行一系列试验研究，结合试验研究结果，探索七孔枪药爆炸冲击载荷能量释放行为与相关参量之间的量化关系，进而为膜片毁伤机理研究提供理论依据，并建立膜片损伤孔洞尺寸与爆炸冲击载荷峰值压力之间的联系规律，最后，基于J-C模型的动态本构关系及失效准则对膜片破坏模式进行数值模拟研究。结果表明，随着爆炸冲击载荷压力地不断增大，含预制孔洞损伤膜片主要呈现均匀性损伤孔洞、边缘性应力集中撕裂、以及剪切冲塞等宏观损伤模式；建立的能量释放关系、以及含预制损伤膜片损伤孔洞尺寸与爆炸峰值压力之间地内在关联为多尺度损伤机理研究提供了量化依据；数值模拟中的膜片破坏形态及损伤孔洞尺寸与试验结果基本吻合，该数值模拟研究可为多尺度试验研究提供借鉴。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	张红艳1
	蔡宣明1
	马铁华2
	张瑜2
	范志强1
	高玉波1

关键词 ：冲击, 高压容器仓, 损伤模式, 剪切冲塞

Abstract：Aiming at problems of damage mode of discharge hole membrane structure caused by high energy blast gas of high pressure vessel being unable to predict accurately and effectively and existing dangerous cases of membrane early breaking and non-membrane breaking, the macro and micro damage characteristics of Q235 steel structure membranes with pre-fabricated damage hole under blast impact load were studied.Based on high-pressure blast device, a series of tests were conducted for the anti-blast damage effect of membranes above mentioned.Combining with test results, quantitative relations among seven-hole gunpowder blast impact load energy release behavior and relevant parameters were explored to provide the theoretical basis for studying membrane damage mechanism, and establish the relation between membrane damaged hole size and peak pressure of blast impact load.Finally, based on the dynamic constitutive relation and failure criterion of J-C model, the membrane failure mode was simulated numerically.The results showed that with increase in blast impact load pressure, membranes with prefabricated hole mainly reveal macro-damage modes, such as, uniform damage holes, edge stress concentration tearing and shear plug; the built energy release relations and the inner correlation between damaged hole size and peak pressure of blast impact load provide a quantitative basis for studying multi-scale damage mechanism; membrane failure forms and damaged hole size obtained with numerical simulation agree well with test results.

Key words： impact high pressure vessel damage mode shear plug

收稿日期: 2019-01-31 出版日期: 2019-11-28

引用本文:

张红艳1，蔡宣明1，马铁华2，张瑜2，范志强1，高玉波1. 高能气体冲击载荷作用下高压容器仓排放孔膜片损伤模式及机理研究[J]. 振动与冲击, 2019, 38(23): 146-151.
ZHANG Hongyan1, CAI Xuanming1, MA Tiehua2, ZHANG Yu2, FAN Zhiqiang1, GAO Yubo1. Damage mode and mechanism for membrane of discharge hole of high pressure vessel under high energy gas impact load. JOURNAL OF VIBRATION AND SHOCK, 2019, 38(23): 146-151.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2019/V38/I23/146

[1] Li R, Li, W B, Wang X. M, et al. Effects of control parameters of three-point initiation on the formation of an explosively formed projectile with fins [J]. Shock Waves, 2018,28(2): 191-204.
[2] Zhu Peng, Guan Zhen, Fu Shuai, et al. Firing and initiation characteristics of energetic semiconductor bridge integrated with varied thickness of Al/MoO3 nanofilms [J]. Materials Science-Medziagotyra, 2018,24(4): 143-147.
[3] Baker Wade A, Untaroiu Costin D, Crawford Dawn M, et al. Mechanical characterization and finite element implementation of the soft materials used in a novel anthropometric test device for simulating underbody blast loading [J]. Journal of The Mechanical Behavior of Biomedical Materials, 2017,74(10): 358-364.
[4] Dharmasena K P，Wadley H N G，Xue Z Y, et al. Mechanical response of metallic honeycomb sandwich panel structures to high- intensity dynamic loading [J]. International Journal of Impact Engineering, 35(9):1063-1074.
[5] Vaidya U K，Pillay S，Bartus S, et al. Impact and post- impact vibration response of protective metal foam composite sandwich plates [J]. Materials Science and Engineering A, 2006, 428(1-2): 59-66.
[6] Bahei-El-Din Y A，Dvorak G J，Fredricksen O J. A blast-tolerant sandwich plate design with a ployurea interlayer [J]. International Journal of Solids and Structures, 2006, 43(25-26): 7644-7658.
[7] 赵跃堂，寇伟晓，储程，等. 管片衬砌结构在接触爆炸荷载作用下的毁伤特性分析[J]. 振动与冲击, 2018, 37(11): 95-100.
    ZHAO Yuetang，KOU weixiao，CHU Cheng，et al. Damage characteristics analysis for segment lining structures under contact detonation [J]. Journal of Vibration and Shock, 2018, 37(11): 95-100.
[8] 赵旭东，刘国庆，高兴勇. 爆炸冲击波对装甲车辆的毁伤效能[J]. 火力与指挥控制, 2017, 42(12): 110-115.
    ZHAO Xudong，LIU Guoqing，GAO Xingyong. Study on Damage Efficiency of Blast Wave to Armored Vehicle [J]. Fire Control & Command Control, 2017, 42(12): 110-115.
[9] Kim Do Kyun, Ng William Chin Kuan, Hwang Oeju. An empirical formulation to predict maximum deformation of blast wall under explosion [J]. Structural Engineering and Mechanics, 2018,68(2): 237-245.
[10] S.Chung Kim Yuen, A.Butler, H.Bornstein, et al. The influence of orientation of blast loading on quadrangular plates [J]. Thin-Walled Structures, 2018, 131: 827-837.
[11] 张成亮，朱锡，侯海量，等. 爆炸冲击波与高速破片对夹层结构的联合毁伤效应试验研究[J]. 振动与冲击, 2014, 33(15): 184-188.
    ZHANG Chengliang，ZHU Xi，HOU Hailiang, et al. Tests for combined damage effect of blast waves and high- velocity fragments on composite sandwich plates [J]. Journal of Vibration and Shock, 2014, 33(15): 184-188.
[12] Haifu Wang, Yuanfeng Zheng, Qingbo Yu, et al. Impact-induced initiation and energy release behavior of reactive materials [J]. Journal of Applied Physics, 2011,110(7): 074904(1-6).
[13] 郭子涛，高斌，郭钊，等. 基于J-C模型的Q235钢的动态本构关系[J]. 爆炸与冲击, 2018, 38(4): 804-810.
    GUO Zitao，GAO Bin，GUO Zhao, et al. Dynamic constitutive relation based on J-C model of Q235 steel [J]. Explosion and Shock Waves, 2018, 38(4): 804-810.
[14] 郭子涛，舒开鸥，高斌，等. 基于J- C模型的Q235钢的失效准则[J]. 爆炸与冲击, 2018, 38(6): 1325-1331.
    GUO Zitao，SHU Kaiou，GAO Bin, et al. J-C model based failure criterion and verification of Q235 steel [J]. Explosion and Shock Waves, 2018, 38(6): 1325-1331.