Abstract：Robotic arm is widely used in industrial and space exploration.Dynamic analysis of a flexible robotic arm carrying a moving end effector was investigated.The system was modeled as a translating and rotating flexible cantilever beam with a moving mass.For the convenience purpose, two coordinate systems were introduced: a local coordinate system that rotates with the cantilever beam, and a fixed global coordinate system.The physical quantities of the structure in the local coordinate system were transformed into the global coordinate system, and the total kinetic energy and potential energy of the structure were given.Then the equations of the structure were derived by the Lagrange's equation with the assumed mode method.When the robotic arm rotates at a uniform angular velocity the system dynamic equation is linear, while it rotates at a variable angular velocity the system dynamic equation is nonlinear.Finally, the dynamic responses of the robotic arm and the moving end effector under different motion states were analyzed by numerical examples.Moreover, the influences of frictional force on vibration characteristics of the robotic arm were also discussed.The obtained conclusions provide theoretical basis for the design of robots and their equipments.
赵亮. 带有移动末端执行器的柔性机械臂的动力学分析[J]. 振动与冲击, 2020, 39(8): 112-117.
ZHAO Liang. Dynamic analysis of a flexible robotic arm carrying a moving end effector. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(8): 112-117.
[1] Wang P K C, Wei J D. Vibrations in a moving flexible robot arm [J]. Journal of Sound and Vibration, 1987,116(1):149-160.
[2] Stylianou M, Tabarrok B. Finite element analysis of an axially moving beam, Part I-Time integration [J]. Journal of Sound and Vibration,1994,178(4):433-453.
[3] Zhu W D, Ni J. Energetic and stability of translating media with an arbitrarily varying length [J]. Journal of Vibration and Acoustics, 2000, 122 (3):295-304.
[4] Wang L H, Hu Z D, Zhong Z, etal. Hamiltonian dynamic analysis of an axially translating beam featuring time-variant velocity [J]. Acta Mechanic, 2009, 206:149-161.
[5] Wang L H, Hu Z D, Zhong Z, etal. Dynamic analysis of an axially translating viscoelastic beam with an arbitrarily varying length [J]. Acta Mechanic, 2010, 214:225-244.
[6] 王 亮, 陈怀海, 贺旭东，等. 轴向运动变长度悬臂梁的振动控制[J]. 振动工程学报，2009，22(6):565-570.
WANG Liang, CHEN Huai-hai, HE Xu-dong, etal. Vibration control of an axially moving cantilever beam with varying length [J]. Journal of Vibration Engineering, 2009，22(6): 565- 570.
[7] 赵 亮，胡振东. 轴向运动功能梯度悬臂梁动力学分析[J].
振动与冲击, 2016, 35(2):124-128.
ZHAO Liang, HU Zhen-dong. Dynamic analysis of an axially translating functionally graded cantilever beam[J]. Journal of Vibraion and Shock, 2016, 35(2):124-128.
[8] 李山虎，杨靖波，黄清华，等. 轴向运动悬臂梁的独立模态振动控制(I)近似理论分析[J]. 应用力学学报，2002, 19(1):35-38.
LI Shan-hu, YANG Jing-bo, HUANG Qing-hua, etal. Independent model space vibration control of an axially moving cantilever beam (Part I) theoretical analysis of approximation [J]. Chinese Journal of Applied Mechanics, 2002, 19(1):35-38.
[9] B.O. Al-Bedoor, Y.A. Khulief. Vibrational motion of an elastic beam with prismatic and revolute joints, J. Sound Vib. 190 (1996) 195-206.
[10] Zhao L, Hu Z D. Active vibration control of an axially translating robot arm using the self-sensing actuator[J]. Shock and Vibration , 2015 https://doi.org/10.1155/2015/964139.
[11] 刘 宁，杨国来. 移动质量作用下轴向运动悬臂梁振动特性分析[J]. 振动与冲击，2012, 31(3):102-105.
LIU Ning, YANG Guo-lai. Vibration property analysis of axially moving cantilever beam considering the effect of moving mass [J]. Journal of Vibration and Shock, 2012, 31(3):102-105.
[12] Yau D T W, Fung E H K. Dynamic response of a rotating flexible arm carrying a moving mass[J]. Journal of Sound and Vibration, 2002, 257(1):107-117.
