[1] Keinänen H, Moilanen S, Tervokoski J, et al.Influence of rotating band construction on gun tube loading-part I :numerical approach[J] Journal of Pressure Vessel Technology,2012,134( 4) : 041006.
[2] 樊黎霞,何湘玥.弹丸挤进过程的有限元模拟与分析[J].兵工学报,2011,32(8):963-969.
FAN Li-xia, HE Xiang-yue. Finite Element Simulation and Process Analysis of Projectile Entering into Barrel[J]. Acta Armamentarii, 2011,32(8):963-969.
[3]刘国庆, 徐诚, 丁传俊. 狙击步枪弹/枪相互作用数值研究[J]. 振动与冲击, 2017, 36(19):1-7.
LIU Guo-qing, XU Cheng, DING Chuan-jun. Numerical calculation on the interaction between bullet and sniper rifle[J]. Journal of vibration and shock, 2017, 36(19):1-7.
[4] 蒋泽一.弹丸挤进过程研究[D].中北大学,2014.
JIANG Ze-yi. Research on the Process of Projectile Engrav-ing[D].North University Of China,2014.
[5] 陆野,周克栋,赫雷,等.某大口径枪械内弹道挤进时期的数值仿真与分析[J].弹道学报,2014(2):67-71.
LU Ye, ZHOU Ke-dong, HE Lei, et al. Numerical simulation and analysis of engraving duration during interior ballistic of some large-caliber small arms[J]. Journal of Ballistics, 2014(2):67-71.
[6] 王鹏, 杨国来, 葛建立,等. 基于Johnson-Cook本构模型的弹带挤进过程数值模拟[J]. 弹道学报, 2015, 27(2):55-61.
WANG Peng, YANG Guo-lai, GE Jian-li, et al. Numercial simulation of rotating band engraving pProcess based on Johnson-Cook constitutive model[J].Journal of Ballistics, 2015,27(2):55-61.
[7]安俊斌,李强,李世康,等.某大口径枪械弹丸挤进坡膛过程的仿真分析[J].火炮发射与控制学报,2017,38(1):17-21.
AN Jun-bin, LI Qiang, LI Shi-kang, et al. Simulation analysis of projectile engraving process of the large-caliber firearm[J].Journal of Gun Launch & Control,2017,38(1):17-21.
[8]丁传俊,张相炎.基于热力耦合有限元模型的弹带挤进过程及内弹道过程的仿真研究[J].兵工学报,2015,36(12) :2254-2261.
DING Chuan-jun, ZHANG Xiang-yan. Simulation study of bearing band engraving process and interior ballistic process based on thermo-mechanical coupling FEA model[J]. Acta Armamentarii, 2015,36(12) :2254-2261.
[9]李淼,钱林方,孙河洋.某大口径火炮弹带热力耦合挤进动力学数值模拟研究[J].兵工学报,2016,37(10):1803-1811.
LI Miao, QIAN Lin-fang, SUN He-yang. Research on coupled thermo-mechanical model during rotating band engraving process[J]. Acta Armamentarii,2016,37(10):1803-1811.
[10]马明迪, 崔万善, 曾志银,等. 基于有限元与光滑粒子耦合的弹丸挤进过程分析[J]. 振动与冲击, 2015(6):146-150.
MA Ming-di, CUI Wan-shan, ZENG Zhi-yin, et, al. Engraving process analysis of projectiles based on coupling of FEM and SPH[J]. Journal of vibration and shock, 2015(6):146-150.
[11]杨宇召,徐诚,樊黎霞.高温引起的弹头壳铜被甲材料性能变化对弹头膛内运动影响[J].兵工学报,2018,39(6):1074-1081.
YANG Yu-zhao, XU Cheng, FAN Li-xia. An analysis of motion of projectile in bore with the change of material properties of copper armor due to high temperature[J]. Acta Armamentarii, 2018,39(6):1074-1081.
[12] Johnson G R,Cook W H. Fracture characteristics of three metals subjected to various strains,strain rates,temperatures and pressures[J].Engineering Fractures Mechanics,1985,21(1):31-48.
[13]Nix F C, Macnair D. The Thermal Expansion of Pure Metals: Copper, Gold, Aluminum, Nickel, and Iron[J]. Physical Review, 1941, 60(8):597-605.
[14] 朱德才, 张立文, 裴继斌,等. 固态塑性成形过程中界面接触换热的实验研究[J]. 塑性工程学报, 2008, 15(1):92-96.
ZHU De-cai, ZHANG Li-wen, PEI Ji-bin, et al. Experiment research on the thermal contact conductance during the solid plastic forming[J]. Journal of Plasticity Engineering, 2008, 15(1):92-96.
[15] 段海涛, 杜三明, 张永振,等. 高速干滑动条件下钢/铜摩擦副摩擦磨损表面摩擦热规律研究[J]. 润滑与密封, 2007, 32(10):40-42.
DUAN Hai-tao, DU San-ming, ZHANG Yong-zhen, et al. Study on the friction heat rule under high-speed dry sliding conditions[J]. Lubrication Engineering, 2007, 32(10):40-42.
[16]李淼, 钱林方, 陈龙淼. 弹带挤进过程内弹道特性研究[J]. 振动与冲击, 2016, 35(23):74-79.
LI Miao, QIAN Lin-fang, CHEN Long-miao. Interior ballistics' features during rotating band engraving process[J]. Journal of vibration and shock, 2016, 35(23):74-79.
[17]刘国庆, 徐诚. 狙击步枪弹准静态弹头挤进力研究[J]. 兵工学报, 2014, 35(10):1528-1535.
LIU Guo-qing, XU Cheng. Research on quasi-static engraving force of sniper rifle bullet[J]. Acta Armamentarii, 2014, 35(10):1528-1535.
[18] 冯国铜,周克栋,赫雷,等.复杂射击规范下枪管温度场数值分析与试验研究[J].北京理工大学学报,2017, 37(10):1003-1008.
FENG Guo-tong, ZHOU Ke-dong, HE Lei, et al. Numercial analysis and experimental study of gun barrel’s temperature under complicated firing regulations[J].Transactions of Beijing Institute of Technology. ,2017, 37(10):1003-1008.
[19]顾祖成,徐诚,曹帅.典型小口径步枪枪管系统冷热枪状态差异三维有限元分析[J]弹道学报2018,30(2):47-53
GU Zu-cheng, XU Cheng, CAO Shuai. Three-dimension finite element analysis on state difference between hot gun and cold gun in typical small caliber rifle barrel system[J].Journal of Ballistics.2018,30(2):47-53. |