Abstract：In order to improve the protective capability of isolator of inertial navigation equipment, a multi-element parallel isolator was designed, which can unload impact loads in any direction by a large margin, and a disc spring which can bear large loads with small deformation was selected as an elastic element. At the same time, quasi-static compression test, vibration test and impact test were carried out to analyze the stiffness characteristics of isolator and its influence on isolation performance. It is found that with the increase of the number of disc springs in a single spacer, the preload increases，and the quasi-zero stiffness characteristic of the elastic component is gradually stronger, and then the vertical and horizontal vibration isolation capabilities are weakened to varying degrees. In the study of the isolation performance, when the quasi-zero stiffness characteristics are more obvious, the peaks of the acceleration response obtained by the test and simulation are larger, but with the increase of the impact load, the isolation rate tends to be stable. Finally, when the elastic element has weak quasi-zero stiffness characteristics, it is beneficial to ensure that the isolator keeps good vibration isolation and shock isolation ability under complex impact environment, which provides a reference for the optimal design of multi- element parallel isolator.
高鹏1,2，杜志鹏1,2，张磊1,2，闫明1. 刚度特性对八连杆隔离器隔振、隔冲性能的影响分析[J]. 振动与冲击, 2020, 39(11): 288-294.
GAO Peng1,2, DU Zhipeng1,2, ZHANG Lei1,2, YAN Ming1. Analysis of influence of stiffness characteristics on vibration and shock isolation performance of eight-element isolator. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(11): 288-294.
[1] 汪玉, 冯奇.舰船设备抗冲隔振系统建模理论及其应用[M]. 北京: 国防工业出版社, 2006.
WANG Yu, FENG Qi. Modeling theory and application of anti-seismic vibration isolation system for ship equipment [M]. Bei Jing: National Defense Industry Press, 2006.
[2] 钱按其, 嵇春艳, 王自力. 水下爆炸载荷作用下水面舰艇设备冲击环境预报方法研究[J]. 舰船科学技术, 2006, 28(4):43-47.
QIAN An-qi, JI Chun-yan, WANG Zi-li. Prediction method of shock environment for equipments on water ship under water explosion [J].Ship Science and Technology, 2006, 28(4) : 43-47.
[3] 汪玉. 实船水下爆炸冲击试验及防护技术[M]. 北京: 国防工业出版社, 2010.
WANG Yu. Impact Test and Protection Technology of Underwater Explosion of Ship [M]. Bei Jing: National Defense Industry Press, 2010.
[4] 沈荣瀛, 华宏星. 舰船机械设备冲击隔离技术研究进展[J]. 船舶力学, 2010, 20(5): 299-301.
SHEN Rong-ying, HUA Hong-xing. Advances in study on shock isolation of naval quipment [J]. Ship Mchanics, 2010, 20(5): 299-301.
[5] Hoque M E, Mizuno T, Ishino Y, et al. A three-axis vibration isolation system using modified zero-power controller with parallel mechanism technique [J]. Mechatronics, 2011, 21(6):1055-1062.
[6] Huang X , Liao Q , Wei S . Closed-form forward kinematics for a symmetrical 6-6 Stewart platform using algebraic elimination[J]. Mechanism & Machine Theory, 2010, 45(2):327-334.
[7] Preumonta A, Horodincaa M, Romanescua I, et al. A six-axis single-stage active vibration isolator based on Stewart platform [J]. Journal of sound and Vibration, 2007, 300(3),644-661.
[8] Afzalifar B , Lidström, Per, Nilsson K . Parametric damped vibrations of Gough-Stewart platforms for symmetric configurations[J]. Mechanism & Machine Theory, 2014, 80(4): 52-69.
[9] Tari H , Su H J, Hauenstein J D . Classification and complete solution of the kinetostatics of a compliant Stewart–Gough platform[J]. Mechanism & Machine Theory, 2012, 49(3): 177-186.
[10] 徐杭田, 单树军. 粘性阻尼在软特性刚度隔冲系统中的作用研究[J]. 振动与冲击, 2010, 29(2):196-198.
XU Hang-tian, SHAN Shu-jun. Effect of viscous damping in a soft stiffness shock isolation system [J] Journal of Vibration and Shock, 2010，29(2)：196-198．
[11] 单树军, 何琳. 粘性阻尼在硬特性刚度隔冲系统中的作用[J]. 振动与冲击, 2008, 27(6): 96-98.
SHAN Shu-jun, HE Lin. Effect of Viscous Damping on A Hard Rigidity Shock Isolation System [J]. Journal of Vibration and Shock, 2008，27(6)：96-98．
[12] 江国和, 沈荣瀛, 吴广明. 舰船设备冲击隔离系统优化设计计算[J]. 噪声与振动控制, 2003, 23(6): 25- 28.
JIANG Guo-he, SHEN Rong-ying, WU Guang-ming. Qptimal calculation on shock isolation of naval naval equipment [J]. Noise and Vibration Control, 2003，23(6)：25- 28．
[13] 刘兴天, 黄修长, 张志谊, 华宏星. 激励幅值及载荷对准零刚度隔振器特性的影响[J]. 机械工程学报, 2013,49(6)：90~94．
LIU Xing-tian, HUANG Xiu-chang, ZHANG Zhi-yi, HUA Hong-xing. Influence of excitation Amplitude and load on the characteristics of quasi-zero stiffness isolator [J]. Journal of Mechanical Engineering, 2013, 49(6): 90~94．
[14] 冯志壮, 钱峰等. 新型液弹隔振器设计与仿真[J]. 航空学报, 2017(38): 2-6.
FENG Zhi-zhuang, QIAN Feng, et al. Design and simulation for new fluid elastomer vibration isolator [J]. Acta Aeronautica et Astronautica Sinica 2017(38): 2-6.
[15] 徐道临, 张月英, 周加喜等. 一种准零刚度隔振器的特性分析与实验研究[J]. 振动与冲击, 2014, 33(11):209-213.
XU Dao-lin, ZHANG Yue-ying, ZHOU Jia-xi, et al. Characteristic analysis and experimental investigation for a vibration isolation with quasi-zero stiffness [J]. Journal of Vibration and Shock, 2014, 33(11): 209-213.
[16] 黄真. 论机构自由度[M]. 北京: 科学出版社，2011.
HUANG Zhen. On Degree of Freedom of Mechanism. Bei Jing: Science Press，2011.
[17] 路立军. 旋量理论概述[J]. 机械工程师, 2012(4): 40-41.
LU Li-jun. An overview of screw theory [J]. Mechanical Engineer, 2012(4): 40-41.
[18] 张春辉, 汪玉, 温肇东, 赵建华. 被动式stewart隔冲平台刚度特性研究[J].振动、测试与诊断,2015,35（2）:290-291.
ZHANG Chun-hui, WANG Yu, WEN Zhao-dong, ZHAO Jian-hua. Research on stiffness characteristics of a passive stewart shock isolation platform [J]. Vibration Measurement& Diagnosis, 2015, 35（2）: 290-291.
