Micro-vibration isolation performance of a clamped-clamped buckled beam quasi-zero-stiffness isolator
WANG Yunfeng,LI Bo,WANG Litong
Tianjin Key Laboratory of Microgravity Environment Simulation Technology,Tianjin Institute of Aerospace Mechanical and Electrical Equipment,Tianjin 300458,China
Micro-vibration in spacecraft is difficult to isolate with traditional passive isolators due to its low amplitude and wide frequency band features. A clamped-clamped buckled beam quasi-zero-stiffness (QZS) isolator has features of high static stiffness and low dynamic stiffness, and it avoids gap and friction in revolute joints, so it is suitable for micro-vibration isolation. Here, its dynamic characteristics and vibration-isolation performance were studied. Firstly, the zero-stiffness condition for the buckled beam with a positive stiffness and negative one parallel connected was derived. Secondly, effects of system damp and disturbance amplitude on the system vibration-isolation performance were investigated using the harmonic balance (HB) method. Finally, the simulation with the software SIMULINK was performed to validate the system’s micro-vibration isolation performance. The results indicated that a clamped-clamped buckled beam quasi-zero-stiffness (QZS) isolator's performance is much better than a linear system’s; the former can effectively isolate micro-vibration.
收稿日期: 2017-02-06
出版日期: 2018-07-28
引用本文:
王云峰，李博，王利桐. 两端固支屈曲梁准零刚度隔振器的微振动隔振性能分析[J]. 振动与冲击, 2018, 37(15): 124-129.
WANG Yunfeng,LI Bo,WANG Litong. Micro-vibration isolation performance of a clamped-clamped buckled beam quasi-zero-stiffness isolator. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(15): 124-129.
[1] G. S. Aglietti, R. S. Langley, S. B. Gabriel, Model building and verification for active control of micro-vibrations with probabilistic assessment of the effects of uncertainties[J]. Journal of Mechanical Engineering Science ,2004, 218(4) 389-400.
[2] S. S. Narayan, P. S. Nair, A. Ghosal, Dynamic interaction of rotating momentum wheels with spacecraft elements, Journal of Sound and Vibration, 2008, 315: 970–984.
[3] Chunchuan Liu, Xingjian Jing, Steve Daley et al. Recent advances in micro-vibration isolation[J]. Mechanical System and Signal Processing, 2015, 56(57):55-80
[4]徐道临,周 杰,周加喜等.碟形橡胶准零刚度隔振器的设计和特性分析[J]. 湖南大学学报，2015，42(8)：22-28
Xu Daolin, Zhou Jie, Zhou Jaxi,et al. Design and Analysis of a Disc Rubber Vibration Isolator with Quasi-Zero-Stiffness Characteristic[J]. Journal of Hunan University (Natural Science), 2015,42(8): 22-28
[5]Chao-Chieh Lan, Sheng-An Yang, Yi-Syuan Wu. Design and experiment of a compact quasi-zero-stiffness isolator capable of a wide range of loads[J]. Journal of Sound and Vibration, 2014, 333: 4843-4858
[6] Ivana Kovacic, Michael J. Brennan, Timothy P. Waters. A study of a nonlinear vibration isolator with a quasi-zero stiffness characteristic[J]. Journal of Sound and Vibration, 2008,315: 700-711
[7]A. Carrellaa,, M.J.Brennana, I.Kovacic, et al. On the force transmissibility of a vibration isolator with quasi-zero-stiffness[J]. Journal of Sound and Vibration, 2009, 322:707-717
[8]A. Carrella, M. J. Brennan, T. P. Waters. Static analysis of a passive vibration isolator with quasi-zero-stiffness characteristic[J]. Journal of Sound and Vibration, 2007, 301: 678-689
[9]Zhifeng Hao, Qingjie Cao. The isolation characteristics of an archetypal dynamical model with stable-quasi-zero-stiffness[J]. Journal of Sound and Vibration, 2015, 340: 61-79
[10]徐道临，赵智，周加喜.气动可调式准零刚度隔振器设计及特性分析[J].湖南大学学报:自然科学版, 2013, 40(7): 47-52.
Xu Daolin, Zhao Zhi, Zhou JaXi. Design and Analysis of an Adjustable Pneumatic Vibration Isolator with Quasi-Zero-Stiffness Characteristic[J]. Journal of Hunan University (Natural Science), 2013, 40(7): 47-52
[11]A. R. Valeev, A. N. Zotov, S. A. Kharisov. Application of disk springs for manufacturing vibration isolators with quasi zero stiffness[J]. Chemical and Petroleum Engineering, 2015, 51:194-200
[12]Jiaxi Zhou, Xinlong Wang, Daolin Xu, et al. Nonlinear dynamic characteristics of a quasi zero stiffness vibration isolator with cam–roller–spring mechanisms[J]. Journal of Sound and Vibration, 2015, 346: 53-69
[13]Dao-lin XU, Yue-ying ZHANG, Jia-xi ZHOU, et al. On the analytical and experimental assessment of performance of a quasi zero stiffness isolator[J]. Journal of Vibration and Control, 2014, 20: 2314-2325.
[14]Xiuchang Huang , YongChen, Hongxing Hua, et al. Shock isolation performance of a nonlinear isolator using Euler buckled beam as negative stiffness corrector: Theoretical and experimental study[J]. Journal of Sound and Vibration, 2015, 345:178-196
[15] 关新, 王光远, 梁鲁等. 空间相机低频隔振系统及试验验证[J]. 航天返回与遥感, 2011, 32(6):53-61
Guan Xin, Wang Guangyuan, Liang Lu, et al. Experimental Demonstration of a Low Frequency Isolation System for High Resolution Optical Payload[J]. Spacecraft Recovery & Remote Sensing, 2011, 32(6):53-61
[16]D.L. PLATUS. Negative stiffness mechanism vibration isolation systems[J]. Vibration Control in Microelectronics, Optics, and Metrology, 1991, 1619: 44-54.
[17]A. F. Benjamin , W. S. David , R. H. Michael, et al. Analytical and experimental investigation of buckled beams as negative stiffness elements for passive vibration and shock isolation systems[J]. Journal of Vibration and Acoustics, 2014, 136:1-12
[18]赵剑, 贾建援, 王洪喜等. 双稳态屈曲梁的非线性跳跃特性研究[J]. 西安电子科技大学学报（自然科学版），2007, 34(3): 458-462.
Zhao Jian, Jia Jianyuan, Wang Hongxi, et al. Nonlinear Snap-through Characteristics of a Compressed Bi-stable Buckled Beam[J]. Journal of Xidian University 2007, 34(3): 458-462.
[19]M. Vangbo. An Analytical Analysis of a Compressed Bistable Buckled Beam[J]. Sens. Actuators A, 1998, 69(3): 212–216.
[20]Lingshuai Meng, JingGong Sun, Wenjuan Wu. Theoretical design and characteristics analysis of a quasi-zero stiffness isolator using a disk spring as negative stiffness element[J]. Shock and Vibration, 2015: 1-19
