The dynamic characteristics of the pump impeller ring seal are closely related to the internal flow characteristics of the orifice ring and even the pump's running stability, the improvement of flow characteristics can be achieved by the shape of the sealing surface of the mouth ring, to this end, a "sealing dam + spiral groove" micro-shaped mouth ring sealing structure for small gaps is proposed in order to obtain better port ring sealing dynamic characteristics. The research shows that the laminar flow model and the turbulence model have good similarity in the basic laws of the ring seal dynamic characteristics and sealing performance, there is only a certain difference in the trend and magnitude of the parameter changes, the analysis suggests that the turbulence model can more fully reflect the effects of micro-gap and microstructure on flow characteristics; the dynamic pressure effect and the pumping effect generated by the spiral groove are enhanced with the increase of the rotational speed and the decrease of the radial clearance; compared with the smooth ring, the spiral notch ring can significantly increase the maximum pressure of the liquid film, and the increase of the eccentricity of the moving ring is more significant; it can be seen that the spiral groove shape can achieve better centering of the ring rotor, reduce wear and prolong the service life.
陈汇龙，路圣盛，吴远征，李新稳，韩婷，桂恺. 螺旋槽动压型口环密封动力特性研究[J]. 振动与冲击, 2020, 39(12): 85-94.
CHEN Huilong，LU Shengsheng，WU Yuanzheng，LI Xinwen，HAN Ting，GUI Kai. A study on dynamic characteristics of spiral groove dynamic pressure ring seal. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(12): 85-94.
[1]Pragenau G L V. Damping Seals for Turbomachinery[J]. 1984.
[2] R Nordmann ， F Dietzen ， W Janson ,and et.al, Rotodynamic coefficients and leakage flow for smooth and grooved seals in turbopumps. Proceedings of the second IFToMM International Conference on rotordynamics,Tokyo,Japan,1986:619-627
[3]ARTHUR S P, CHILDS D W. Measured Rotordynamic and Leakage Characteristics of a Tooth-on-Rotor Labyrinth Seal With Comparisons to a Tooth-on-Stator Labyrinth Seal and Predictions[C]// ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. 2015:V07AT31A016.
[4] Soto E A, Childs D W. Experimental Rotordynamic Coefficient Results for (a) a Labyrinth Seal With and Without Shunt Injection and (b) a Honeycomb Seal[J]. Journal of Engineering for Gas Turbines & Power, 1998, 121(1):V005T14A003-V005T14A003.
[5] Childs D W, Moyer D S. Vibration characteristics of the HPOTP (High Pressure Oxygen Turbopump) of the SSME (Space Shuttle Main Engine)[J]. Journal of Engineering for Gas Turbines & Power, 1984, 107(1):152-159.
[6] Childs D W, Kim C H. Test Results For Round-Hole-Pattern Damper Seals: Optimum
Configurations and Dimensions for Maximum Net Damping[J]. 1986, 108(4):605-611.
[7] Childs D W. Additional Test Results for Round-Hole-Pattern Damper Seals: Leakage, Friction Factors, and Rotordynamic Force Coefficients[J]. Journal of Tribology, 1990, 112(2):365-371.
[8] Iwatsubo T, Sheng B. An Exper imental Study on the Static and Dynamic Characteristics of Damper Seals[J]. Transactions of the Japan Society of Mechanical Engineers, 1994, 56(523):673-680.
[9] 黄若，张烨，陈涛. 考虑密封结构的球轴承涡轮增压器转子动力学特性研究[J]. 振动与冲击，2012, 16(4): 153-156.
HUANG Ruo,ZHANG Wei,CHEN Tao. Research on Dynamic Characteristics of Ball Bearing Turbocharger Rotor Considering Seal Structure[J]. Journal of Vibration and Shock, 2012, 16(4): 153-156.
[10] Kanki H, Kawakami T. Experimental Study on the Static and Dynamic Characteristics of Screw Grooved Seals[J]. Journal of Vibration & Acoustics, 1988, 110(3):326.
[11] T Iwatsubo ， BS Yang ， R Ibaraki. Theoretical approach to obtaining dynamic characteristics of noncontacting spiral-grooved seals[C]. NASA CP 2443, rotor-dynamic instability problems in high performance turbomachinery-1986, Proceedings of a workshop held at Texas A&M University. 1986.
[12] 马纲, 徐广州, 沈心敏. 柱面螺旋槽气膜密封结构参数设计分析[J]. 润滑与密封, 2007, 32(4):127-130.
Ma Gang, Xu Guangzhou, Shen Xinmin. Design and Analysis of Parameters of Cylindrical Spiral Groove Sealing Structure[J]. Lubrication Engineering, 2007, 32(4): 127-130.
[13] Taylor G I. Stability of a Viscous Liquid Contained between Two Rotating Cylinders[J]. Philosophical Transactions of the Royal Society of London, 1923, 223(718):289-343.
[14] Drazin P G, Reid W H. Hydrodynamic Stability[M]. 世界图书出版公司北京公司, 2012.
[15] Diprima R C. The stability of a viscous fluid between rotating cylinders with an axial flow[J]. Journal of Fluid Mechanics, 1964, 19(4):528-538.
[16] Chandrasekhar S. The stability of spiral flow between otating cylinders. Proc.Roy.Soc.A.265,1962,198.
[17] Snyder H A. Experiments on the Stability of Spiral Flow at Low Axial Reynolds Numbers[J]. Proceedings of the Royal Society of London, 1962, 265(1321):198-214.
[18] Diprima R C， Pridor A. The stability of viscous flow between rotating concentric cylinders with an axial flow.Proc.R.Soc.London A.366,1979:555-573
[19] 关醒凡. 现代泵理论与设计[M]. 中国宇航出版社, 2011.pp:611-614
Guan Xingfan. Modern Pump Theory and Design [M]. China Aerospace Publishing House, 2011.pp:611-614
[20] ANSYS FLUENT 14.0 Theory Guide[CP/DK]. ANSYS Inc.,USA,2011.
[21] Nagai K, Kaneko S, Taura H, et al. Numerical and Experimental Analyses of Static Characteristics for Liquid Annular Seals with Helical Grooves in Seal Stator[J]. Journal of Tribology, 2017..
