[1] 黄开放.螺栓固定结合面动力学建模与影响因素研究[D].武汉:华中科技大学,2012.
Huang Kaifang. Research on dynamic modeling and the factors of bolted joints [D]. Wuhan: Huazhong University of Science and Technology, 2012. (in Chinese)
[2] Jeong Kim, Joo Cheol Yoon, Beom Soo Kang. Finite element analysis and modeling of structure with bolted joints [J]. Applied Mathematical Modeling, 2007,31:895-911.
[3] 张学良,范世荣,温淑花等.基于等效横观各向同性虚拟材料的固定结合部建模方法[J].机械工程学报, 2017, 53(15):141-147.
Zhang Xueliang, Fan Shirong, Wen Shuhua, et al. Modeling method of fixed joint interface based on equivalent transversely isotropic virtual material [J]. Journal of Mechanical Engineering, 2017, 53(15):141-147. (in Chinese)
[4] 孙志勇.基于虚拟材料的栓接结合部动力学特性研究[D].大连:大连理工大学,2017.
Sun Zhiyong. Research on dynamic properties of bolted joints based on virtual material [D]. Dalian: Dalian University of Technology, 2017. (in Chinese)
[5] 田红亮,刘芙蓉,方子帆等. 引入各向同性虚拟材料的固定结合部模型[J]. 振动工程学报,2013,26(4):561-573.
Tian Hongliang, Liu Furong, Fang Zifan, et al. Immovable joint surface’s model using isotropic virtual material [J]. Journal of Vibration Engineering, 2013,26(4):561-573. (in Chinese)
[6] Tian Hongliang, Li Bin, Liu Hongqi,et al. A new method of virtual material hypothesis-based dynamic modeling on fixed joint interface in machine tools [J]. International Journal of Machine Tools & Manufacture, 2011, 51:239-249.
[7] 王书亭,李杰,刘涛 等.机械固定结合面刚度特性建模[J]. 华中科技大学学报(自然科学版),2011,39(8):1-5.
Wang Shuting, Li Jie, Liu Tao, et al. Interfacial stiffness characteristic modeling of mechanical fixed joints [J]. Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011,39(8):1-5. (in Chinese)
[8] 姚星宇,王建军,翟学.航空发动机螺栓连接薄层单元建模方法[J].北京航空航天大学,2015,41(12):2269-2279.
Yao Xingyu, Wang Jianjun, Zhai Xue. Modeling method of bolted joints of aero-engine based on thin-layer element [J]. Journal of Beijing University of Aeronautics and Astronautics, 2015, 41(12):2269-2279. (in Chinese)
[9] 姜东,吴邵庆,史勤丰等.基于薄层单元的螺栓连接结构接触面不确定性参数识别[J].工程力学,2015,32(4):220-227.
Jiang Dong, Wu Shaoqing, Shi Qinfeng, et al. Contact interface parameter identification of bolted joint structure with uncertainty using thin layer element method [J]. Engineering Mechanics, 2015,32(4):220-227. (in Chinese)
[10] 姜东,吴邵庆,史勤丰等.基于各向同性本构关系薄层单元的螺栓连接参数识别[J].振动与冲击,2014,33(22):35-40.
Jiang Dong, Wu Shaoqing, Shi Qinfeng, et al. Parameter identification of bolted-joint based on the model with thin-layer elements with isotropic constitutive relation [J]. Journal of Vibration and Shock, 2014, 33(22):35-40. (in Chinese)
[11] 章伊华,庞奎,林丹益 等. 基于接触面特征的螺栓联接刚度研究[J]. 兵工学报,2017,38(1):195-201.
ZHANG Yihua, Pang Kui, Lin Danyi, et al. Study of bolt joint stiffness based on contact surface characteristics [J]. Acta Armamentarii, 2017, 38(1): 195-201. (in Chinese)
[12] Crawley E F, O’Donnell K J. Force-state mapping identification of nonlinear joints [J]. AIAA Journal, 1987, 25:1003-1010. |