[1]CHEN F.Automotive disk brake squeal: an overview[J].International Journal of Vehicle Design, 2009, 51(1/2): 39-72.
[2]KINKAID N M, O’REILLY O M, PAPADOPOULOS P.Review of automotive disc brake squeal[J].Journal of Sound and Vibration, 2003, 267(1): 105-166.
[3]张立军, 刁坤, 孟德建, 等.摩擦引起的振动和噪声的研究现状与展望[J].同济大学学报(自然科学版), 2013,41(5):765-772.
ZHANG Lijun, DIAO Kun, MENG Dejian, et al.Friction-induced vibration and noise research: the status quo and its prospect[J].Journal of Tongji University (Nature Science), 2013, 41(5): 765-772.
[4]OUYANG H J, NACK W, YUAN Y B, et al.Numerical analysis of automotive disc brake squeal: a review[J].International Journal of Vehicle Noise and Vibration, 2005, 1(3/4): 207-231.
[5]OUYANG H J, NACK W, YUAN Y B, et al.On automotive disc brake squeal part Ⅱ: simulation and analysis[R].[S.1.]: SAE Paper, 2003.
[6]LILES G D.Analysis of disc brake squeal using finite element methods[R].[S.1.]: SAE Paper, 1989.
[7]DENIMAL E, SINOU J J, NACIVET S, et al.Squeal analysis based on the effect and determination of the most influential contacts between the different components of an automotive brake system[J].International Journal of Mechanical Sciences, 2019, 151: 192-213.
[8]LEE J M, YOO S M, KIM J H.A study on the squeal of a drum brake which has shoes of non-uniform cross section[J].Journal of Sound and Vibration, 2001, 240 (5): 789-808.
[9]IOANNIDIS P, BROOKS P C, BARTON D C.Drum brake contact analysis and its influence on squeal noise prediction[R].[S.1.]: SAE Paper, 2003.
[10]HUANG J C, KROUSGRILL C M, BAJAJ A K.Modeling of automotive drum brakes for squeal and parameter sensitivity analysis[J].Journal of Sound and Vibration, 2006, 289(1/2): 245-263.
[11]AHMED I, ABOUL-SEOUD S.Drum brake squeal analysis by finite element method[R].[S.1.]: SAE Paper, 2006.
[12]庞明, 张立军, 孟德建,等.鼓式制动器摩擦尖叫的复模态模型与影响因素研究[J].振动与冲击, 2014, 33(8): 35-41.
PANG Ming, ZHANG Lijun, MENG Dejian, et al.Complex modal analysis model for frictional squeal of an automotive drum brake and its affect factors[J].Journal of Vibration and Shock, 2014, 33(8): 35-41.
[13]HOU J, GUO X X, TAN G F.Complex mode analysis on disc brake squeal and design improvement[R].[S.1.]: SAE Paper, 2009.
[14]JONES D R, SCHONLAU M, WELCH W J.Efficient global optimization of expensive black-box functions[J].Journal of Global Optimization, 1998, 13(4): 445-492.
[15]GIUNTA A A.Aircraft multidisciplinary design optimization using design of experiments theory and response surface modeling[D].
Blacksburg: Virginia Polytechnic Institute and State University, 1997.
[16]MATHERON G M.Principles of geostatistics[J].Economic Geology, 1963, 58(8): 1246-1266.
[17]韩忠华.Kriging模型及代理优化算法研究进展[J].航空学报, 2016, 37(11): 3197-3225.
HAN Zhonghua.Kriging surrogate model and its application to design optimization: a review of recent progress[J].Acta Aeronautica et Astronautica Sinica, 2016, 37(11): 3197-3225.
[18]姚雯.不确定性MDO理论及其在卫星总体设计中的应用研究[D].长沙: 国防科学技术大学, 2007.
[19]赖宇阳, 姜欣,方立桥,等.Isight参数优化理论与实例详解[M].北京: 北京航空航天大学出版社, 2012.
[20]曾小华, 王振伟, 宋大凤, 等.基于多岛遗传算法的功率分流式双模混合动力客车参数优化[J].机械工程学报, 2020, 56(2): 98-105.
ZENG Xiaohua, WANG Zhenwei, SONG Dafeng, et al.Parameter optimization of dual-mode power-split hybrid electric bus based on MIGA algorithm[J].Journal of Mechanical Engineering, 2020, 56(2): 98-105.