1. School of Civil Engineering,Changsha University of Science and Technology,Changsha 410114,China;
2. Nanjing Anzheng Software Engineering Company with Limited Liability,Nanjing 210009,China
Aiming at finite element model updating for a long-span concrete cable-stayed bridge, a model updating method was proposed based on the multi-objective optimization to fully use the structure’s static and dynamic test data.The updating objective function was constructed using the structure’s static displacements and dynamic modal frequencies, etc.actual measured data, parameters to be updated were chosen based on the sensitivity analysis.The finite element model of a certain concrete cable-stayed bridge in China was updated with multi-objective optimization using the non-dominated sorting genetic algorithm-II (NSGA-II) to obtain Pareto optimal solution set to the problem of finite element model updating with multi objective optimization.The modified finite element model was verified with the measured static and dynamic data.The results showed that not only the updated model’s static displacements and dynamic calculation results involved in the optimization agree well with the measured values, but also the updated model’s static and dynamic calculation results not involved in the optimization are closer to the measured values; this static and dynamic finite element model updating method for the concrete cable-stayed bridge based on multi-objective optimization has a satisfactory effect, and the updated finite element model can accurately and fully simulate the actual structure.
彭 涛,田仲初 1,张建仁 1, 郑万泔 2. 基于多目标优化的混凝土斜拉桥静动力有限元模型修正[J]. 振动与冲击, 2018, 37(21): 108-116.
PENG Tao1, TIAN Zhongchu1, ZHANG Jianren1, ZHENG Wangan2. Static and dynamic finite element model updating for a concrete cable-stayed-bridge based on multi-objective optimization. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(21): 108-116.
[1] 宗周红,牛杰,王浩. 基于模型确认的结构概率损伤识别方法研究进展[J]. 土木工程学报,2012,45(8):121-130.
Zong Zhou-hong, Niu Jie, Wang Hao. A review of structural damage identification methods based on the finite element model validation[J]. China Civil Engineering Journal, 2012, 45(8): 121-130.
[2] 周林仁,欧进萍. 斜拉桥结构模型修正的子结构方法[J]. 振动与冲击, 2014, 33(19):52-58.
Zhou Lin-ren, Ou Jin-ping. A substructure method for structural model upating of long span cable stayed bridges[J]. Journal of Vibration and Shock, 2014, 33(19):52-58.
[3] 丁幼亮, 李爱群, 韩晓林,等. 润扬大桥斜拉桥结构安全评估的有限元建模与修正[J]. 东南大学学报(自然科学版), 2006, 36(1):92-96.
Ding You-liang, Li Ai-qun, Han Xiao-lin, et al. Finite element modeling and updating of safety evaluation for Runyang cable-stayed bridge[J]. Journal of Southeast University (Natural Science Edition) , 2006, 36(1):92-96.
[4] Masoud Sanayei, Ali Khaloo, Mustafa Gul, et al. Automated finite element model updating of a scale bridge model using measured static and modal test data [J]. Engineering Structures, 2015,102(1): 66-79.
[5] 宗周红,夏樟华. 联合模态柔度和静力位移的桥梁有限元模型修正方法[J]. 中国公路学报,2008,21(6):43-49.
Zong Zhou-hong , Xia Zhang-hua. Finite element model updating method of bridge combined modal flexibility and static displacement[J]. China Journal of Highway and Transport,2008,21(6):43-49.
[6] 梁鹏,李斌,王秀兰,等. 基于桥梁健康监测的有限元模型修正研究现状与发展趋势[J]. 长安大学学报自然科学版, 2014,34(4):52-061.
Liang Peng, Li Bin, Wang Xiu-lan et al. Present research status and development trend of finite element model updating based on bridge health monitring[J]. Journal of Chang’an University (Natural Science Edition), 2014,34(4):52-061.
[7] 张启伟, 范立础. 利用动静力测量数据的桥梁结构损伤识别[J]. 同济大学学报(自然科学版), 1998,26(5):528-532.
Zhang Qi-wei, Fan Li-chu. Damage detection for bridge structures based on dynamic and static measurements[J]. Journal of Tongji University(Natural Science Edition), 1998,26(5):528- 532.
[8] 姚昌荣, 李亚东. 基于静动力测试数据的斜拉桥模型修正[J]. 铁道学报, 2008, 30(3):65-70.
Yao Chang-rong, Li Ya-dong. Updating of Cable-stayed Bridges Model Based on Static and Dynamic Test Data[J]. Journal of the China Railway Society, 2008, 30(3):65-70.
[9] 方志, 唐盛华, 张国刚,等. 基于多状态下静动态测试数据的斜拉桥模型修正[J]. 中国公路学报, 2011, 24(1):34-41.
Fang zhi, Tang Sheng-hua, Zhang Guo-gang, et al. Cable-stayed bridge model updating based on static and dynamic test data of multi-state[J]. China Journal of Highway and Transport, 2011, 24(1):34-41.
[10] 魏锦辉, 任伟新. 基于响应面方法的桥梁静动力有限元模型修正[J]. 公路交通科技, 2015, 32(2):68-73.
Wei Jin-hui, Ren Wei-xin. Static and dynamic bridge finite element model updating based on response surface method[J]. Journal of Highway and Transportation research and Development, 2015, 32(2):68-73.
[11] 王超学, 田利波. 一种改进的多目标合作型协同进化遗传算法[J]. 计算机工程与应用, 2016, 52(2):18-23.
Wang Chao-xue, Tian Li-bo. Improved cooperative coevolutionary genetic algorithm for multi-objective[J]. Computer Engineering and Applications, 2016, 52(2):18-23.
[12] Kalyanmoy Deb, Shivam Gupta. Understanding knee points in bicriteria problems and their implications as preferred solution principles[J]. Engineering Optimization, 2011, 43(11) :1175-1204.
[13] 郑亚飞, 张璐璐, 于永堂,等. 基于Pareto最优的地基沉降多目标反分析[J]. 土木工程学报, 2015, 48(s2):214-219.
Zheng Ya-fei, Zhang Lu-lu, Yu Yong-tang, et al. The multi-objective inverse analysis of foundation settlements engineering based on the Pareto optimality theory[J]. China Civil Engineering Journal, 2015(s2):214-219.
[14] Deb K, Pratap A, Agarwal S, et al. A fast and elitist multiobjective genetic algorithm: NSGA-II[J]. IEEE Transactions on Evolutionary Computation, 2002, 6(2):182-197.
[15] 段绪伟, 李以农, 郑玲,等. 基于NSGA-II遗传算法的磁流变悬置多目标优化[J]. 振动与冲击, 2014, 33(3):191-196.
Duan Xu-wei, Li Yi-nong, Zheng ling, et al. Multi-objective optimization for a MR engine mount based on NSGA-II algorithm[J]. Journal of Vibration and Shock, 2014, 33(3):191- 196.