不同温度和应变率下的闭孔泡沫铝压缩力学性能

摘要
图/表
参考文献(11)
相关文章 (15)

全文: PDF (1051 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要采用MTS和SHPB开展了准静态和动态压缩实验，研究了不同密度的闭孔泡沫铝在不同温度和应变率下的力学性能。实验结果表明，在准静态和动态条件下泡沫铝的压溃强度均随相对密度的增加而增大，且与相对密度变化呈幂指数关系；闭孔泡沫铝具有很强的温度软化效应，其压溃强度随温度的升高而降低，且与温度变化成线性关系；泡沫铝也具有明显的应变率敏感性，其压溃强度随应变率的升高而增大。本文最终拟合得到了闭孔泡沫铝压溃强度关于相对密度、温度以及应变率的经验型公式。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	李雪艳
	李志斌
	张舵

关键词 ：闭孔泡沫铝, 力学性能, 温度, 应变率, 压溃强度

Abstract：SHPB and MTS machine were employed to conduct quasi-static and dynamic compression tests to study mechanical performance of closed-cell aluminum foam with different densities under different temperatures and strain rates.The test results showed that the crushing strength of aluminum foam increases with increase in its relative density under quasi-static and dynamic conditions, the crushing strength has a power exponential relationship with the change of relative density; closed-cell aluminum foam has a very strong temperature softening effect, its crushing strength drops with increase in temperature and has a linear relationship with variation of temperature; aluminum foam has an obvious sensitivity to strain rate, its crushing strength increases with increase in strain rate.Finally, an empirical formula for crushing strength of closed-cell aluminum foam related to relative density, temperature and strain rate was obtained through fitting.

Key words： closed-cell aluminum foam mechanical performance temperature strain rate crushing strength

收稿日期: 2018-09-17 出版日期: 2020-11-28

引用本文:

李雪艳，李志斌，张舵. 不同温度和应变率下的闭孔泡沫铝压缩力学性能[J]. 振动与冲击, 2020, 39(23): 17-20.
LI Xueyan, LI Zhibin, ZHANG Duo. Compression performance of closed-cell aluminium foam under different temperatures and strain rates. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(23): 17-20.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2020/V39/I23/17

[1] 张健, 赵桂平, 卢天健. 闭孔泡沫铝的多轴唯象受压本构参数[J]. 力学学报, 2015, 47(4): 651–663.
ZHANG Jian, ZHAO Guiping, LU Tianjian. Multiaxial phenomenological compressible constitutive parameters for closed-cell aluminum foams [J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(4): 651–663.
[2] 夏志成, 王曦浩, 赵跃堂等. 钢板夹泡沫铝组合板抗爆性能研究[J]. 振动与冲击, 2017, 36(2): 117–122.
XIA Zhicheng, WANG Xihao, ZHAO Yuetang, et al. Anti-blast performance of aluminum foam-core sandwich panels [J]. Journal of vibration and shock, 2017, 36(2): 117–122.
[3] Ashby MF, Evans AG, Fleck NA, et al. Metal foams: a design guide [M]. Oxford: Butterworth-Heinemann; 2000.
[4] 李忠献, 张茂轩, 师燕超. 闭孔泡沫铝的动态压缩性能试验研究[J]. 振动与冲击, 2017, 36(5): 1–6.
LI Zhongxian, ZHANG Maoxuan, SHI Yanchao. Tests for dynamic compressive performance of closed-cell aluminum foams [J]. Journal of vibration and shock, 2017, 36(5): 1–6.
[5] 庞宝君, 郑伟, 陈勇. 基于Taylor实验及理论分析的泡沫铝动态冲击特性研究[J]. 振动与冲击, 2013, 32(12): 154-158.
PANG Baojun, ZHENG Wei, CHEN Yong. Dynamic impact behavior of aluminum foam with a taylor impact test and a theoretical analysis [J]. Journal of vibration and shock, 2013, 32(12): 154–158.
[6] 张健, 赵桂平, 卢天健. 泡沫金属在冲击载荷下的动态压缩行为 [J]. 爆炸与冲击, 2014, 34(3): 279–284.
ZHANG Jian, ZHAO Guiping, LU Tianjian. High speed compression behaviour of metallic cellular materials under impact loading [J]. Explosion and shock waves, 2014, 34(3): 279–284.
[7] 王鹏飞, 徐松林, 胡时胜. 不同温度下泡沫铝压缩行为与变形机制探讨[J]. 振动与冲击, 2013, 32 (5):16–19.
WANG Pengfei, XU Songlin, HU Shisheng. Compressive behavior and deformation mechanism of aluminum foam under different temperature [J]. Journal of vibration and shock, 2013, 32 (5):16–19.
[8] WANG Pengfei, XU Songlin, LI Zhibin, et al. Temperature effects on the mechanical behavior of aluminum foam under dynamic loading[J]. Materials Science & Engineering A, 2014, 599: 174–179.
[9] LI Zhibin, ZHENG Zhijun, YU Jilin, et al. Effect of temperature on the indentation behavior of closed-cell aluminum foam[J]. Materials Science and Engineering A, 2012, 550: 222–226.
[10] LI Zhibin, ZHENG Zhijun, YU Jilin, et al. Spherical indentation of closed-cell aluminum foams: An empirical force–depth relation[J]. Materials Science & Engineering A, 2014, 618: 433–437.
[11] Movahedi N, Linul E, Marsavina L. The Temperature Effect on the Compressive Behavior of Closed-Cell Aluminum-Alloy Foams. Journal of Materials Engineering and Performance. 2018, 27(1): 99-108.