磨损水润滑橡胶轴承承载特性研究

摘要
图/表
参考文献(20)
相关文章 (15)

全文: PDF (1967 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要水润滑橡胶轴承以其无污染、吸振和对冲击不敏感等特点被广泛运用在水泵、发电厂、船舶、潜艇的动力推进轴系中。然而，由于其长期工作在恶劣的江河和海洋等环境中，润滑介质的杂质导致水润滑橡胶轴承极易出现磨损故障，影响其承载特性。为分析磨损后水润滑橡胶轴承的承载特性，本文通过全圆周橡胶轴承的雷诺方程和橡胶内衬的变形方程，建立了六沟槽正常橡胶轴承和三种磨损类型（均匀磨损、锥形磨损和局部磨损）轴承的润滑模型，采用有限差分法和超松弛迭代法对润滑模型进行数值求解。基于数值模型对正常和磨损轴承的承载特性进行了对比分析。结果表明：沟槽对橡胶轴承的承载特性影响较大，六沟槽橡胶轴承的三种磨损中，均匀磨损对润滑承载特性影响最大，锥形磨损次之，局部磨损最小。本文研究结果对水润滑橡胶轴承的承载特性设计及轴承磨损的监测指标构建具有参考价值。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	谢劲松1
	杨飞2
	訾艳阳3

关键词 ：水润滑橡胶轴承, 磨损, 承载特性, 雷诺方程

Abstract：Water-lubricated rubber bearings are widely used in power propulsion shafts of pumps, power plants, ships, and submarines because of their non-pollution, vibration absorption, and insensitivity to impact.However, due to their long-term work in harsh river and ocean environment, impurities in lubricating media lead to wear failure of water-lubricated rubber bearings, which affects their load-bearing characteristics.In order to analyze the load-bearing characteristics of water-lubricated rubber bearings after wear, a lubrication models of six-groove normal rubber bearings and three wear-type bearings were established by means of the Reynolds equation and deformation equation of rubber lining.The lubrication models were solved numerically by a finite difference method and an over-relaxation iteration method.Based on the numerical model, the load-bearing characteristics of normal and wear bearings were compared and analyzed.The results show that grooves have a great influence on the load-bearing characteristics of rubber bearings.Among the three kinds of wear rubber bearings, uniform wear has the greatest influence on the lubrication load-bearing characteristics, followed by conical wear and local wear.The results have reference value for the design of load-bearing characteristics and the construction of wear monitoring indexes of water-lubricated rubber bearings.

Key words： water-lubricated rubber bearings wear load-bearing characteristics reynolds equation

收稿日期: 2019-08-06 出版日期: 2020-12-15

引用本文:

谢劲松1，杨飞2，訾艳阳3. 磨损水润滑橡胶轴承承载特性研究[J]. 振动与冲击, 2020, 39(24): 225-231.
XIE Jingsong1, YANG Fei2, ZI Yanyang3. Load-bearing characteristics of wear water lubricated rubber bearings. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(24): 225-231.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2020/V39/I24/225

[1] Wang Y Q, Shi X J, Zhang L J. Experimental and numerical study on water-lubricated rubber bearings[J]. Industrial Lubrication and Tribology, 2014, 66(2): 282-288.
[2] 段芳莉.橡胶轴承的水润滑机理研究[D]. 重庆：重庆大学，2002.
Duan F L, Study on water lubrication mechanism of rubber bearings[D]. Chongqing: Chongqing University, 2002.
[3] 龙慎文，王优强，周亚博，等. 基于谐响应分析的艉轴承动态特性研究及灵敏度分析[J]. 机械传动，2019，43(05)：101-105.
Long S W, Wang Y Q, Zhou Y B, et al. Study on dynamic characteristic and sensitivity analysis of stern bearing based on harmonic response analysis[J]. Journal of Mechanical Transmission, 2019，43(05):101-105.
[4] 盛晨兴，马成，吴祖旻，等. 不同水润滑尾轴承材料摩擦磨损性能比较[J].润滑与密封, 2018, 43(08):1-6.
Sheng C X, Ma C, Wu Z M, et al. Comparison on friction and wear properties of different water lubricated stern bearing materials[J]. Lubrication Engineering, 2018, 43(08):1-6.
[5] 李文锋，王家序，丁行武，等. 橡胶层厚度对水润滑轴承润滑性能的影响[J]. 润滑与密封, 2014, 39(1): 64-67.
Li W F, Wang J X, Ding H W, et al. Effect of thickness of rubber layer on lubrication performance of water-lubricated bearings[J]. Lubrication Engineering, 2014, 39(1): 64-67.
[6] 杜媛英，李明. 几种不同衬层材料水润滑轴承的润滑特性分析[J].润滑与密封, 2018, 43 (12): 52-56+62.
Li Y Y, Li M. Lubrication characteristics analysis of several water-lubricated bearings with different lining materials[J]. Lubrication Engineering, 2018, 43 (12): 52-56+62.
[7] Gao G Y, Yin Z W, Jiang D, Zhang X L. Numerical analysis of plain journal bearing under hydrodynamic lubrication by water[J]. Tribology International, 2014, 75: 31-38.
[8] Pai R S, Pai R. Non-linear transient analysis of multiple axial groove water-lubricated journal bearings[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2008, 222(4): 549-557.
[9] Feng H H, Xu C D, Wan J. Mathematical model and analysis of the water-lubricated hydrostatic journal bearings considering the translational and tilting motions[J]. Mathematical Problems in Engineering, 2014:353769.
[10] 周亚博，王优强，魏聪，等. 橡胶轴承黏弹性和振动载荷耦合润滑特性研究[J].机械传动, 2019, 43(06):13-17.
Zhou Y B, Wang Y Q, Wei C, et al. Study on lubrication characteristic of rubber bearing based on viscoelasticity and vibrative load[J]. Journal of Mechanical Transmission, 2019, 43(06):13-17.
[11] 王楠，王明武，杨帆，等.八沟槽水润滑橡胶轴承多参数流固耦合分析[J].轴承, 2018 (08): 36-43.
Wang N, Wang M W, Yang F, et al. Multi-parameters Fluid-Solid coupling analysis on water-lubricated rubber bearings with eight grooves[J].Bearing, 2018 (08): 36-43.
[12] 周广武，王家序，王战江，等.多沟槽水润滑橡胶合金轴承润滑特性研究[J].摩擦学学报,2013,33(06):630-637.
Zhou G W, Wang J X, Wang Z J, et al. Analysis of multi-grooves water lubricated rubber alloy bearing considering the elastohydrodynamic lubrication [J]. Tribology, 2013,33(06):630-637.
[13] 王家序，倪小康，韩彦峰，等.微沟槽形貌对水润滑轴承混合润滑特性影响的研究[J].湖南大学学报(自然科学版),2018,45(10):64-71.
Wang J X, Ni X K, Han Y F, et al. Study on the effects of microgroove bottom shapes on mixed lubrication characteristics of water lubricated journal bearing [J]. Journal of Hunan University (Natural Sciences), 2018, 45(10):64-71.
[14] 叶晓琰，郑建波，胡敬宁，等. 轴承长径比对水润滑轴承润滑特性影响实验研究[J].水处理技术,2017,43(11):23-26.
Ye X Y, Zheng J B, Hu J N, et al. Experimental study on the effect of bearing length-diameter ratio on lubrication characteristics of water lubricated bearings[J]. Technology of Water Treatment, 2017, 43 (11): 23-26.
[15] 王楠，孟庆丰，张雪冰，等.多沟槽水润滑橡胶轴承水膜压力的无线测试方法[J].西安交通大学学报,2013,47(03):1-6.
Wang N, Meng Q F, Zhang X B, et al. Wireless measurement for film pressure of Multi-groove water-lubricated rubber bearing[J]. Journal of Xi’an Jiaotong University, 2013,47(03):1-6.
[16] 刘镇星. 转子—水润滑橡胶轴承系统动力学特性研究[D]. 哈尔滨：哈尔滨工业大学, 2013.
Liu Z X. Study on dynamic characteristics of rotor water lubricated rubber bearing system[D]. Harbin: Harbin Institute of Technology, 2013.
[17] 张国贤，金楗. EMP 径向滑动轴承弹性变形的有限元求解[J]. 润滑与密封, 2000 (6): 2-4.
Zhang G X, Jing J. A finite element analysis of EMP journal bearing[J]. Lubrication Engineering, 2000 (6): 2-4.
[18] 贺胜，原霞，史永鹏，等.基于JFO边界条件的连杆衬套润滑特性理论分析[J].润滑与密封,2017,42(05):73-77.
He S, Yuan X, Shi Y P, et al. A theoretical investigation on lubricating characteristics of connecting rod bushing based on JFO boundary condition[J]. Lubrication Engineering, 2017, 42(05): 73-77.
[19] Schweizer, Bernhard. Numerical approach for solving reynolds equation with JFO boundary conditions incorporating ALE techniques[J]. Journal of Tribology,2009,131(1):011702.
[20] 邱鹏，庆崔升，徐小峰，等. Elrod算法与负压力充零算法的比较[J].振动与冲击,1998,17(4): 12-17.
Qiu P, Qing C S, Xu X F, et al. Comparisons between Elrod algorithm and negative pressure zero-filling algorithm[J]. Journal of Vibration and Shock, 1998, 17(4): 12-17.