Calculation method for contact stiffness of contact surface based on multi-scale plastic index model
ZHAO Yongsheng1,2, NIU Nana1,2, YANG Congbin1,2, LIU Zhifeng1,3, JIANG Kai1,3, MENG Lingjun1,3
1. Institute of Advanced Manufacturing and Intelligent Technology, Beijing University of Technology, Beijing 100124, China;
2. Beijing Key Laboratory of Advanced Manufacturing Technology, Beijing University of Technology, Beijing 100124, China;
3. Mechanical Industry Key Laboratory of Heavy Machine Tool Digital Design and Testing, Beijing University of Technology, Beijing 100124, China
Abstract:The contact characteristics of the joint surface of the bolt connection is the key to affect the dynamic and static characteristics of the mechanical system. When the joint surface is in the vibration fatigue state, it will lead to an increase in damping and a decrease in resonance frequency. Therefore, it is very important to establish an accurate prediction model of bolted joint surface for studying the dynamic characteristics of the entire machine tool. This paper combines the plastic exponential expression, statistical roughness parameter and fractal parameter given by Greenwood and Williamson, and establishes a plastic exponential model related to the frequency order of microconvex body, so as to obtain the elasticity-elasticity-plasticity of microconvex body according to the plastic index. The critical frequency ordinal of plastic deformation, and based on the Hertz contact theory, the contact load and contact stiffness of the entire joint surface are obtained by integrating the micro-convex bodies in different frequency intervals. Finally, the combination of finite element simulation and experiment verifies the correctness of the theoretical model, and proves that the above theoretical model has strong engineering application value.
赵永胜1,2,牛娜娜1,2,杨聪彬1,2,刘志峰1,3,姜凯1,3,孟令军1,3. 基于多尺度下塑性指数模型的结合面接触刚度计算方法[J]. 振动与冲击, 2022, 41(3): 115-122.
ZHAO Yongsheng1,2, NIU Nana1,2, YANG Congbin1,2, LIU Zhifeng1,3, JIANG Kai1,3, MENG Lingjun1,3. Calculation method for contact stiffness of contact surface based on multi-scale plastic index model. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(3): 115-122.
[1] Guo X, Ma B, Zhu Y. A magnification-based multi-asperity (MBMA) model of rough contact without adhesion [J]. Journal of the Mechanics and Physics of Solids, 2019, 133:103724.
[2] Greenwood J, Williamson J. Contact of nominally flat surfaces [J]. Proceedings of the Royal Society of London, 1966, 295(1442):300-319.
[3] 赵永武, 吕彦明, 蒋建忠. 新的粗糙表面弹塑性接触模型[J]. 机械工程学报, 2007(03):99-105.
Zhao Y,Lv Y ,Jiang J.A new elastic-plastic contact model for rough surfaces [J].CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2007(03):99-105.
[4] Whitehouse D, Archard J. The properties of random surfaces of significance in their contact[J]. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1970, 316(1524): 97-121.
[5] Kadin Y, Kligerman Y, Etsion I. Unloading an elastic-plastic contact of rough surfaces [J]. Journal of the Mechanics and Physics of Solids, 2006, 54(12):p. 2652-2674.
[6] 傅卫平, 娄雷亭, 高志强,等. 机械结合面法向接触刚度和阻尼的理论模型[J]. 机械工程学报, 2017, 053(009):73-82.
Fu W, Lou L, Gao Z, et al. Theoretical model of normal contact stiffness and damping of mechanical bonding surfaces[J]. CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2017, 053(009):73-82.
[7] Ciavarella M, Murolo G, Demelio G, et al. Elastic contact stiffness and contact resistance for the Weierstrass profile [J]. Journal of the Mechanics and Physics of Solids, 2004, 52(6):1247-1265.
[8] Persson B. Theory of rubber friction and contact mechanics [J]. Journal of Chemical Physics, 2007, 115(8):3840-3861.
[9] Mandelbrot B. The fractal geometry of nature. New York: W. H. Freeman and Company, 1982.
[10] Berry M, Lewis Z. On the Weierstrass-Mandelbrot Fractal Function [J]. Proceedings of the Royal Society of London, 1980, 370(1743):459-484.
[11] Majumdar A, Bhushan B. Fractal model of elastic-plastic contact between rough surfaces [J].Journal of Tribology, 1991, 113(1): 1-11.
[12]Zhao Y, Xu J, Cai L, et al. Stiffness and damping model of bolted joint based on the modified three-dimensional fractal topography [J]. ARCHIVE Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, 2016, 203-210.
[13] Yuan Y, Chen J, Zhang L. Loading-unloading contact model between three-dimensional fractal rough surfaces [J]. AIP Advances, 2018, 8(7).
[14] Jalali H, Khodaparast H, Friswell M. The Effect of Preload and Surface Roughness Quality on Linear Joint Model Parameters [J]. Journal of Sound and Vibration, 2019.
[15] Liu W, Wang Y, Li X, et al. The Normal Dynamic Stiffness Model of Joint Interfaces Based on Fractal Theory [J]. IOP Conference Series: Earth and Environmental Science, 2019.
[16] Wang R, Zhu L, Zhu C. Research on fractal model of normal contact stiffness for mechanical joint considering asperity interaction [J]. International Journal of Mechanical Sciences, 134(2017)357-369.
[17] Liang A, Bian Y, Chen Q, et al. Fractal Prediction Model for the Contact of Friction Surface and Simulation Analysis[C]// International Conference on Industrial Technology & Management. 2019.
[18]Liu Z, Jiang K, Zhang C, et al. A stiffness model of a joint surface with inclination based on fractal theory [J]. Precision Engineering, 2020, 62:47-61.
[19] Liu Z, Jiang K, Dong X, et al. A research method of bearing coefficient in fasteners based on the fractal and Florida theory [J]. Tribology International,2020.
[20] 葛世荣,朱华.摩擦学的分形[M] .机械工业出版 社.2005:132-133.
Ge S, Zhu H. Tribological fractals[M].China Machine Press. 2005:132-133.
[21] 瓦伦丁 L.波波夫.接触力学与摩擦学的原理及其应用.第二版.李强,雒建斌译.北京:清华大学出版社,2011:79-90.
Valentin L. Popow. Contact Mechanics and Friction Physical Principies and Applications(Second Edition).Li Q, Luo J. Bei jing, Tsinghua University Press,2011:79-90.
[22] Zhao Y, Yang C, Cai L, et al. Stiffiness and damping model of bolted joint with unven surface contact pressure distribution [J].Journal of Mechanical Engineering.2015.
[23]Zhao Y,Xu J,Cai L, et al. Contact stiffiness determination of high-speed double-locking toolholder-spindle joint based on a macro-micro scale hybrid method [J]. Internation Journal of Precision Engineering and Manufacturing.2016.
[24] Zhang Y, Lu H, Zhang X, et al. A normal contact stiffness model of machined joint surfaces considering elastic, elasto-plastic and plastic factors [J]. Engineering Tribology,2019.
[25] Xiao H, Sun Y, Chen Z. Fractal modeling of normal contact stiffness for rough surface contact considering the elastic–plastic deformation [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(1).