A review on an accelerated random vibration test of transport packaging
WANG Lijun1, SONG Haiyan1, WANG Zhiwei2
1.School of Light Industry Science and Engineering,Tianjin University of Science & Technology, Tianjin 300222, China;
2.Packaging Engineering Institute, Jinan University, Zhuhai 519070, China
Abstract:The technique of accelerated random vibration test is used to evaluated the safety performance and damage of transport packaging, which can reduce test time and improve efficiency so as to reduce the optimization design period. It is composed of four parts: measurement and analysis of actual vehicle vibration signal, simulation and representation of laboratory signal, vibration fatigue damage of transport packaging and accelerated random vibration test theory and method. The research was reviewed from above four aspects. Statistical characteristics of actual vehicle vibration and influence factors were summarized. Signal simulation methods and the characteristics were concluded. Vibration fatigue theory and damage of transport packaging were described. Current research progress and disadvantage of accelerated random vibration test was analyzed. The unsolved problems were discussed and the future study direction of accelerated random vibration test was indicated.
王立军1,宋海燕1,王志伟2. 运输包装加速随机振动试验研究综述[J]. 振动与冲击, 2022, 41(8): 277-286.
WANG Lijun1, SONG Haiyan1, WANG Zhiwei2. A review on an accelerated random vibration test of transport packaging. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(8): 277-286.
[1] 彭国勋. 物流运输包装设计[M].第2版. 北京: 文化发展出版社, 2011.
PENG Guo-xun. Distribution packaging design[M]. Beijing: Cultural Development Press, 2011.
[2] 方科. 物流产品堆码随机振动分析与环境监测[D]. 广州: 暨南大学, 2017.
FANG Ke. Random vibration analysis for stacked packaging and monitoring system for logistics environment[D]. Gaungzhou: Jinan University, 2017.
[3] BÖRÖCZ P. Vibration and acceleration levels of multimodal container shipping physical environment[J]. Packaging Technology and Science, 2019, 32(6): 269-277.
[4] Kurniawan M P, Chonhenchob V, Singh S P, et al. Measurement and analysis of vibration levels in two or three wheel delivery vehicles in southeast Asia[J]. Packaging Technology and Science, 2015, 28: 823-837.
[5] Lu F, Ishikawa Y, Hiroaki K, et al. Effect of vehicle speed on shock and vibration levels in truck transport[J]. Packaging Technology and Science, 2010, 23: 101-109.
[6] Rissi G O, Singh S P, Burgess G, et al. Measurement and analysis of truck transport environment in Brazil[J]. Packaging Technology and Science,2008, 21(4):231–246.
[7] Zhou H, Wang Z-W. Measurement and analysis of vibration levels for express logistics transportation in South China[J]. Packaging Technology and Science, 2018, 31: 665.
[8] Zhou R, Yan LP, Li BG, et al. Measurement of truck transport vibration levels in China as a function of road conditions, truck speed and load level[J]. Packaging Technology and Science, 2015, 28: 949-957.
[9] Soleimani B, Ahmadi E. Measurement and analysis of truck vibration levels as a function of packages locations in truck bed and suspension[J]. Computers and Electronics in Agriculture, 2014, 109:141-147.
[10] Jarimopas B, Singh SP, Saengnil W. Measurement and analysis of truck transport vibration levels and damage to packaged tangerines during transit[J]. Packaging Technology and Science, 2005, 18: 179-188.
[11] Rouillard V, Lamb M J. Using the Weibull distribution to characterize road transport vibration levels[J]. Packaging Technology and Science, 2020, 33(7): 255-266.
[12] Singh J, Singh SP, Joneson E. Measurement and analysis of US truck vibration for leaf spring and air ride suspensions, and development of tests to simulate these conditions[J]. Packaging Technology and Science, 2006, 19: 309-323.
[13] Garcia-Romeu-Martinez MA, Singh SP, Cloquell-Ballester VA. Measurement and analysis of vibration levels for truck transport in Spain as a function of payload, suspension and speed[J]. Packaging Technology and Science, 2008, 21: 439-451.
[14] Chonhenchob V, Singh SP, Singh JJ, et al. Measurement and analysis of truck and rail Vibration Levels in Thailand[J]. Packaging Technology and Science, 2010, 23: 91-100.
[15] Péter B, Singh SP. Measurement and analysis of vibration levels in rail transport in central Europe[J]. Packaging Technology and Science, 2017, 30: 361-371.
[16] Singh SP, John R. A, Burgess GG. Comparison between lateral, longitudinal, and vertical vibration levels in commercial truck shipments[J]. Packaging Technology and Science ,1992, 5(2):71-75.
[17] ASTM D4728-06. Standard Test Method for Random Vibration Testing of Shipping Containers[S]. ASTM International: Philadelphia, USA, 2012.
[18] ASTM D4169-2016. Standard Practice for Performance Testing of Shipping Containers and Systems[S]. West Conshohocken: ASTM International, 2016.
[19] GB/T 7031-2005. 机械振动道路路面谱测量数据报告[S]. 2005.
GB/T 7031-2005. Mechanical vibration-road surface profiles-reporting of measured data[S]. 2005.
[20] GB/T 4857.23-2012. 包装运输包装件基本试验第 23部分:随机振动试验方法[S]. 2012.
GB/T 4857.23-2012. Packaging-basic tests for transport packages-Part 23: Random vibration test method[S]. 2012
[21] ISTA 3A-2008. Packaged-Products for Parcel Delivery System Shipment 70Kg (150lb) or Less[S]. International Safe Transit Association, 2008.
[22] ISTA 3E-2009. Unitized Loads of Same Product[S]. International Safe Transit Association, 2009.
[23] ISTA 3F-2008. Packaged Products for Distribution Center to Retail Outlet Shipment 100 1b (45kg) [S]. International Safe Transit Association, 2008.
[24] JIS Z0232-2004. Packaged Freights-Method of Vibration Test[S]. Technical Committee on Logistics and Distribution of Goods, 2004.
[25] Lu F, Ishikawa Y, Shiina T, et al. Analysis of shock and vibration in truck transport in Japan[J]. Packaging Technology and Science, 2008, 21(8): 479-489.
[26] Singh SP, Saha K, Singh J, et al. Measurement and analysis of vibration and temperature levels in global intermodal container shipments on truck, rail and ship[J]. Packaging Technology and Science, 2012, 25: 149-160.
[27] Paternoster A, Vanlanduit S, Springael S, et al. Vibration and shock analysis of specific events during truck and train transport of food products[J]. Food Packaging and Shelf Life, 2018, 15: 95-104.
[28] Otari S, Odof S, Nolot JB, et al. Statistical characterization of acceleration levels of random vibrations during transport[J]. Packaging Technology and Science, 2011, 24: 177-188.
[29] Palmieri M, Cesnik M, Slavic J, et al. Non-Gaussianity and non-stationarity in vibration fatigue[J]. International of fatigue, 2017, 97:9-19.
[30] Wu Y X, Gao Y F. A modified spectral representation method to simulate non-Gaussian random vector process considering wave-passage effect[J]. Engineering Structures, 2019, 201: 1-15.
[31] Hosayama A, Tsuda K, Horiguchi S. Development and validation of kurtosis response spectrum analysis for antivibration packaging design taking into consideration[J]. Packaging Technology and Science, 2019, 33(2): 1-14.
[32] Grigoriu M. Existence and construction of translation models for stationary non-Gaussian processes[J]. Probabilistic Engineering Mechanics, 2009, 24(4): 545-551.
[33] Grigoriu M. Simulation of stationary non-Gaussian translation processes [J]. Journal of Engineering Mechanics, 1998, 124(2): 121-126.
[34] Gioffrè, Massimiliano, Gusella V, Grigoriu M. Non-Gaussian wind pressure on prismatic buildings. II: Numerical Simulation[J]. Journal of Structural Engineering, 2001, 127(9): 990-995.
[35] Grigoriu M, Ditlevsen O, Arwade S R. A monte carlo simulation model for stationary non-Gaussian processes[J]. Probabilistic Engineering Mechanics, 2003, 18(1): 87-95.
[36] 洪旭,彭勇波,李杰. 脉动风速随机傅里叶谱模型的参数聚类分析[J]. 同济大学学报, 2018,46(6):715-721.
HONG Xu, PENG Yong-bo, LI Jie. Cluster analysis of parameter of stochastic fourier spectrum for fluctuating wind speeds[J]. Journal of Tongji university (natural science), 2018,46(6):715-721.
[37] 汪大海, 李志豪, 李杰. 大型户外单立柱三面广告牌风荷载的试验研究[J]. 土木工程学报, 2018, 51(8):15-24.
WANG Da-hai, LI-Zhi-hao, LI Jie. Experimental study of wind load effects on large outdoor single-column-supported three-plate billboard[J]. China civil engineering journal, 2018, 51(8):15-24.
[38] 彭勇波, 李杰. 高层建筑结构随机振动的最优阻尼器控制策略[J]. 土木工程学报, 2012, 45(2): 168-171.
PENG Yong-bo, LI Jie. Optimal damping control scheme for random vibration of high-rising building structures[J]. China civil engineering journal, 2012, 45(2): 168-171.
[39] 刘章军, 刘增辉. 随机风场模拟的连续本征正交分解-随机函数方法[J]. 振动与冲击, 2018, 37(7):32-37.
LIU Zhang-jun, LIU Zeng-hui. Simulation of a stochastic wind field based on a continuous proper orthogonal decomposition-random function approach[J]. Journal of vibration and shock, 2018, 37(7):32-37.
[40] Sakamoto S, Ghanem R. Polynomial chaos decomposition for the simulation of non-gaussian nonstationary stochastic processes[J]. Journal of Engineering Mechanics, 2002, 128(2): 190-201.
[41] Sakamoto S, Ghanem R. Simulation of multi-dimensional non-stationary random fildes[J]. Probabilistic Engineering Mechanics, 2002, 17(2): 167-176.
[42] Samllwood D O. Generating non-Gaussian vibration for testing purpose. Sound and Vibration, 2005, 39(10): 18-23.
[43] Yamazaki F, Shinozuka M. Digital generation of non-Gaussian stochastic fields[J]. Journal of Engineering Mechanics, 1998, 114(7): 1183-1197.
[44] 徐飞, 李传日, 姜同敏, 等. 非高斯随机振动的模拟方法[J]. 北京航空航天大学学报, 2014, 40(9):1239-1244.
XU Fei, LI Chuan-ri, JIANG Tong-min, et al. Simulation of non-Gaussian random vibration[J]. Journal of Beijing university of aeronautics astronautics, 2014, 40(9):1239-1244.
[45] 蒋瑜,陶俊勇,王得志,等. 一种新的非高斯随机振动数值模拟方法[J]. 振动与冲击,2012,31(19):169-173.
JIANG Yu, TAO Jun-yong, WANG De-zhi, et al. A novel approach for numerical simulation of a non-Gaussian random vibration[J]. Journal of vibration and shock, 2012,31(19):169-173.
[46] 夏静, 袁宏杰, 徐如远. 一种新的非高斯随机振动信号的模拟方法[J]. 北京航空航天大学学报, 2019,45(2):366-372.
XIA Jing, YUAN Hong-jie, XU Ru-yuan. A new simulation method of non-Gaussian random vibration signal[J]. Journal of Beijing university of aeronautics astronautics, 2019,45(2):366-372.
[47] Gurley K P, Kateem A, Tognarelli M A. Simulation of a class of non-normal random process[J]. International Journal of Non-linear Mechanics, 1996, 31(5): 601-617.
[48] Murphy R W. Endurance testing of heavy duty vehicles[J]. SAE Technical Paper, 1982, 1-36.
[49] Young D, Gordon R, Cook B. Quantifying the vibration environment for a small parcel system[C]. Herndon,VA, Institute of Packaging Professional,1998.
[50] Chonhenchob V, Singh S P, Singh J, et al. Measurement and analysis of vehicle vibration for delivering packages in small-sized and medium-sized trucks and automobiles[J]. Packaging Technology and Science,2012,25:31-38.
[51] Singh J, Singh S P, Joneson E. Measurement and analysis of US truck vibration for leaf spring and air ride suspensions, and development of tests to simulate these conditions[J]. Packaging Technology and Science,2006,19:309-323.
[52] Wallin B. Developing a random vibration profile standard[C]. In IAPRI Symposium. Windsor, UK: ISTA, 2007.
[53] Kipp W. Random vibration testing of packaged-products: considerations for methodology improvement[C]. In IAPRI World3. Conference on Packaging, Bangkok, Thailand. 2008.
[54] Kipp W. Accelerated random vibration with time history shock for improved laboratory simulation[C]. In Institute of Packaging Professional Annual Members Meeting. San Jose,California, 2001.
[55] Baren P V. The missing knob on your random vibration controller[J]. Sound and Vibration,2005,39:10-16.
[56] Rouillard V, Sek M A. Synthesizing non-stationary, non-Gaussian random vibration[J]. Packaging Technology and Science, 2010,23:423-439.
[57] Griffiths K R. An improved method for simulation of vehicle vibration using a journey database and wavelet analysis for the pre-distribution testing of packaging[D], Bath, England, University of Bath,2012.
[58] Rouillard V. On the synthesis of non-Gaussian road vehicle vibrations[D]. PhD Thesis, Monash University, Australia, 2006.
[59] Rouillard V. Quantifying the non-stationary of vehicle vibrations with the run test[J]. Packaging Technology and Science, 2014, 27: 203-219.
[60] Van BP. The missing knob on your random vibration controller[J]. Sound and Vibration, 2005, 39: 10-16.
[61] Lepine J, Rouillard V, Sek M. On the use of machine learning to detect shocks in road vehicle vibration signals [J]. Packaging Technology and Science, 2017: 387-398.
[62] Griffiths KR, Hicks BJ, Keogh PS, et al. Wavelet analysis to decompose a vibration simulation signal to improve pre-distribution testing of packaging [J]. Mechanical Systems and Signal Processing, 2016, 76-77: 780–795.
[63] Nei D, Nakamura N, Roy P, et al. Wavelet analysis of shock and vibration on the truck bed [J]. Packaging Technology and Science, 2008, 21: 491-499.
[64] Zhou H, Wang Z-W. A new approach for road-vehicle vibration simulation[J]. Packaging Technology and Science, 2018, 31: 246-260.
[65] 周浩. 公路运输包装随机振动分析与模拟方法研究[D]. 2017, 广州,暨南大学.
ZHOU Hao. Study on random vibration analysis and simulation method of road transport packaging[D]. 2017, Guangzhou: Jinan University.
[66] Zhou H, Wang Z-W. Comparison study on simulation effect of improved simulation methods for packaging random vibration test[J]. Packaging Technology and Science, 2018, 32(3): 119-131.
[67] 张亚军. S-N疲劳曲线的数学表达式处理方法探讨[J]. 理化检验(物理分册),2007, 43(11):563-565.
ZHANG Ya-jun. Discussion on processing method for mathematical expression of S-N fatigue curve[J]. Physical testing and chemical analysis(part A: physical testing), 2007, 43(11):563-565.
[68] 吴志荣, 李玲, 胡绪腾, 等. 多轴疲劳寿命模型建立新方法[J]. 哈尔滨工业大学学报,2013,45(11):80-85.
WU Zhi-rong, LI Ling, HU Xu-teng, et al. A new establishing method of multi-axial fatigue life modal[J]. Journal of Harbin institute of technology, 2013,45(11):80-85.
[69] 吴光强, 李运超, 盛云. 后悬架多轴疲劳寿命预测[J]. 同济大学学报(自然科学版),2010,38(6):880-884,902.
WU Guang-qiang, LI Yun-chao, SHENG Yun. Multiaxial fatigue life prediction of rear suspension[J]. Journal of tongji university(Natural science), 2010,38(6):880-884,902.
[70] Crandall P H, Mark W D. Random vibration in mechanical systems[J]. Academic Press: New York, 1963.
[71] 卢富德,许晨光,高德,等. 悬臂易损部件在矩形加速度脉冲激励下的动力学响应与有限元分析[J]. 振动与冲击, 2016, 35(5): 191-195.
LU Fu-de, XU Chen-guang, GAO De, etc. Shock response and finite element analysis of critical components with cantilever beam type under action of a rectangular acceleration pulse[J]. Journal of vibration and shock, 2016, 35(5): 191-195.
[72] 高德,卢富德. 基于杆式弹性易损部件的非线性系统跌落冲击研究[J]. 振动与冲击,2012, 31(15): 47-49+59.
GAO De, LU Fu-de. Drop impact analysis of packaging system with bar type elastic critical components[J]. 2012, 31(15): 47-49+59.
[73] 朱大鹏. 非线性包装系统中关键部件振动可靠性分析[J]. 振动与冲击, 2019, 38(18): 109-114+134.
ZHU Da-peng. Vibration reliability analysis of critical components of a nonlinear package system[J]. Journal of vibration and control, 2019, 38(18): 109-114+134.
[74] 高德,吴朝武,陆俊杰. 运输包装系统振动行为研究与发展分析[J]. 包装工程,2020, 41(15): 51-58.
GAO De, WU Chao-wu, LU Jun-jie. Dynamic behavior research and dynamic development of transportation packaging system[J]. Packaging engineering, 2020, 41(15): 51-58.
[75] Rice S O. Mathematical analysis of random noise [J]. Bell Systems Technical Journal, 1944, 23: 282-332.
[76] Wirshing P H, Haugen E B. Probabilistic design for random ASCE 1973, 99: 1593-1607.
[77] Dowing SD, Socie DF. Simple rainflow counting algorithms[J]. International Journal of Fatigue, 1982, 4(1): 31-40.
[78] 朱学旺. 疲劳损伤等效在随机振动试验中的应用[J]. 装备环境工程, 2007, 41(1): 11-13.
ZHU Xue-wang. Application of fatigue damage equivalence in random vibration test[J]. Equipment environmental engineering, 2007, 41(1): 11-13.
[79] 葛敬冉. 随机载荷下金属结构多轴疲劳寿命预测方法的研究 [D]. 哈尔滨: 哈尔滨工业大学, 2015.
GE Jing-ran. The multiaxial fatigue life estimation of metal structures under random loading[D]. Harbin: Harbin Institute of Technology, 2015.
[80] 张炜, 王玺, 徐志勇, 等. 基于频域方法的随机振动疲劳损伤分析[J]. 航空精密制造技术, 2014, 50(5): 18-22.
ZHANG Wei, WANG Xi, XU Zhi-yong, et al. Research on random vibration fatigue damage analysis of vehicle equipment based on frequency domain method[J]. Aviation precision manufacturing technology, 2014, 50(5): 18-22.
[81] 何凯欣, 穆国宝, 席忠民, 等. 结构随机振动疲劳寿命的预测[J]. 汽车工程师, 2015, 8: 24-26,43.
HE Kai-xin, MU Guo-bao, XI Zhong-min, et al. Fatigue life prediction of structures under random vibration[J]. Auto Engineer, 2015, 8: 24-26,43.
[82] Lu PM, Zhao BH, Yan JM. Efficient algorithm for fatigue life calculations under broad band loading based on peak approximation[J]. Journal Engineering Mechanics, 1998, 5:233-236.
[83] Chow C L, Li D L. An analytical solution for fast fatigue assessment under wide-band random loading[J]. International Journal of Fatigue, 1991, 13(5): 395-404.
[84] Kam J C P. Recent development in the fast corrosion fatigue analysis of offshore structures under random wave loading[J]. International Journal of Fatigue, 1990, 12(6):458-468.
[85] 屠海明, 邓洪渊. 桅杆结构风振疲劳分析[J]. 四川建筑科学研究, 2001, 27(2):6-8.
TU Hai-ming, DENG Hong-yuan. Analysis of wind-induced fatigue in guyed mast[J]. Building science research of Sichuan, 2001, 27(2):6-8.
[86] Bendat J S, Piersol A G. Measurement and analysis of random Data [J]. Wiley: New York, 1966.
[87] Wirsching P H, Light M C. Fatigue under wide band random stress [J]. Journal of the Structural Division, 1980, 106(7): 1593-1607.
[88] Chaudhury G. Spectrum fatigue of broad-band stress spectrum with one or more peaks [J]. OTC5333, 1986, 387-396.
[89] Dirlik T. Application of computers in fatigue analysis: [dissertation] [J]. Coventry: University of Warwick, 1985.
[90] Winterstein S R. Non-normal responses and fatigue damage[J]. Journal of Engineering Mechanics-ASCE, 1985,111(10): 1291-1295.
[91] Winterstein S R. Moment-based hermite models of random vibration[R]. Lyngby: Department of Structural Engineering, Technical University of Denmark, 1987.
[92] Sarkani S, Kihl DP, Beach JE. Fatigue of welded joints under narrow-band non-gaussian loadings[J]. Probabilistic Engineering Mechanics, 1994, 9: 179-190.
[93] Kihl D P, Sarkani S, Beach J E. Stochastic fatigue damage accumulation under broadband loadings[J]. International Journal of Fatigue, 1995, 17(5): 321-329.
[94] Sarkani S, Michaelov G, Kihl D P, et al. Fatigue of welded joints under wideband loadings[J]. Probabilistic Engineering Mechanics, 1996, 11:221-227.
[95] Yu L, Das P K, Barltrop N D P. A new look at the effect of bandwidth and non-normality of fatigue damage[J]. Fatigue & Fracture of Engineering Materials & Structures, 2004, 27: 51-58.
[96] Wang J. Non-gaussian stochastic dynamic response and fatigue of offshore structures[D]. Texas: Texas A&M University,1992.
[97] Lutes L D, Hu S L. Non-normal stochastic response of linear systems [J]. Journal of Engineering Mechanics, 1986, 112(2): 127-141.
[98] Winterstein S R. Nonlinear vibration models for extremes and fatigue [J]. Journal of Engineering Mechanics, 1988, 114(10): 1772-1790.
[99] Rychlik I, Johannesson P, Leadbetter M R. Modelling and statistical analysis of ocean-wave data using transformed gaussian processes [J]. Marine Structures, 1997, 10: 13-47.
[100] 宋宝峰. 关于振动脆值定义及应用的探讨[J]. 包装工程, 1996, 17(2): 1-5.
SONG Bao-feng. Approach on the definition and the application of the brittle value of vibration[J]. Packaging engineering, 1996, 17(2): 1-5.
[101] Wang Z-W, Wang J, Zhang Y-B, et al. Application of the inverse substructure method in the investigation of dynamic characteristic of product transport system[J]. Packaging Technology and Science, 2012, 25(6): 351-362.
[102] Lim TC, Li J. A theoretical and computational study of the FRF-based substructuring technique applying enhanced least square and TSVD approach[J]. Journal of Sound and Vibration, 2000, 231(4): 1135-1157.
[103] Fang K, Wang Z-W. Influence of jumping phenomenon on response of package under random vibration[J]. Packaging Technology and Science, 2018, 31(9): 585-599.
[104] Wang Z-W, Fang K. Dynamic performance of stacked packaging units[J]. Packaging Technology and Science, 2016, 29(10): 491-511.
[105] Jamialahmadi A, Trost T, Östlund S. A proposed tool to determine dynamic load distribution between corrugated boxes. Packaging Technology and Science, 2011, 24(6): 317–329.
[106] 王志伟,戚德彬. 两层计算机堆码包装动力学试验研究[J]. 机械工程学报, 2017,53(03):90-99.
WANG Zhi-wei, QI De-bin. Experimental study of dynamic response of two layers stacked packaging units of computers[J]. Journal of mechanical engineering, 2017,53(03):90-99.
[107] 王志伟,林深伟. 随机振动下产品包装件动态响应的实验研究和有限元分析[J]. 振动与冲击, 2017, 36(13):223-229.
WANG Zhi-wei, LIN Shen-wei. Tests and FE analysis for dynamic responses of packaged products under random vibration environment[J]. Journal of vibration and shock, 2017, 36(13):223-229.
[108] 房树盖,王志伟. 不同加速度谱型激励下非线性堆码包装系统的动力学响应[J]. 应用力学学报,2019,36(6):1286-1293.
FANG Shu-gai, WANG Zhi-wei. Dynamic responses of nonlinear stacked packaging system under different spectral acceleration excitations[J]. Chinese journal of applied mechanics, 2019,36(6):1286-1293.
[109] Wang Z-W, Zhong L-L. Finite element analysis and experimental investigation of beer bottle-turnover boxes transport unit under vibration excitation[J]. Packaging Technology and Science, 2020, 33(6): 197-214.
[110] 孙君,王志伟. 啤酒瓶周转箱随机振动响应的实验研究[J]. 振动工程学报,2018, 31(5):759-771.
SUN Jun, WANG Zhi-wei. Experimental investigation of dynamic response of beer bottle-turnover boxes in random vibration[J]. Journal of vibration engineering, 2018, 31(5):759-771.
[111] Zhou R, Su SQ, Yan YF, et al. Effect of transport vibration levels on mechanical damage and physiological responses of Huanghua pears[J]. Postharvest Biology and Technology, 2007, 46: 20-28.
[112] A comparison of corrugated boxes and reusable plastic containers for mango distribution[J]. Packaging Technology and Science, 2003, 16(6): 231-237.
[113] 卢立新,黄祥飞,华岩. 基于模拟运输条件的梨果实包装振动损伤研究[J]. 农业工程学报,2009,25(06):110-114.
LU Li-xin, HUANG Xiang-fei, HUA Yan. Effect of packaging methods on vibration bruising of pear fruits by simulated transport tests[J]. Transactions of the CSAE, 2009,25(06):110-114.
[114] Wang Z-W, Sun Y-C. Experimental investigation on bending fatigue failure of corrugated paperboard[J]. Packaging Technology and Science, 2018, 31(9): 601-609.
[115] 孙玉成. 瓦楞纸板疲劳性能研究[D].广州:暨南大学, 2018.
SUN Yu-cheng. Study on fatigue performance of corrugated paperboard[D]. 2018, Gaungzhou: Jinan University.
[116] Lamb M J, Rouillard V, Sek M A. Monitoring the evolution of damage in packaging systems under sustained random loads [J]. Packaging Technology and Science, 2012, 25: 39-51.
[117] Lamb M J. Monitoring the structural integrity of packaging materials subjected to sustained random loads [D]. Melbourne: Victoria University, 2001.
[118] Lamb M J, Rouillard V. Static and dynamic strength of paperboard containers subjected to variations in climatic conditions [J]. Packaging Technology and Science, 2017, 30: 103-104.
[119] Wang L-J, Lai Y-Z, Wang Z-W. Fatigue failure and Grms-N curve of corrugated paperboard box[J]. Journal of Vibration and Control, 2020, 26(11-12): 1028-1041.
[120] Shires D, White W. The comparison of different vibration test methodologies [C]. Transport Packaging Forum, 2011, ISTA. Florida, USA.
[121] Wang L-J, Wang Z-W, Rouillard Vincent. Investigation on vibration scuffing life curves[J]. Packaging Technology and Science, 2018, 31(8): 523-531.
[122] Ge C F, Pan L. Vibration damage rate curves for quantifying abrasion of printed packaging in accelerated random vibration test[J]. Packaging Technology and Science, 2017, 31(2): 71-81.
[123] Kipp WI. Vibration Testing Equivalence: How Many Hours of Testing Equals How Many Miles of Transport? International Safe Transit Association: East Lansing, MI. Paper presented at ISTACON. 2000 updated December 2008; http://www.ista.org/forms/Vibration_Testing_Equivalence-Kipp_2000.pdf [accessed 5 February 2010].
[124] Shires D. On the time (test acceleration) of broadband random vibration tests [J]. Packaging Technology and Science, 2011, 24: 75-87.
[125] Allegri G, Zhang X. On the inverse power laws for accelerated random fatigue testing [J]. International Journal of Fatigue, 2008, 30: 967-977.
[126] 杨斌, 刘吉彪, 程军圣. 基于多尺度振动传递率函数和灰度矩相对熵的损伤识别方法[J]. 中国机械工程, 2015, 26(12): 1639-1644.
YANG Bin, LIU Ji-biao, CHENG Jun-sheng. Damage identification based on multi-scale transmissibility function and grey moment relative entropy[J]. China mechanical engineering, 2015, 26(12): 1639-1644.
[127] 李奇志, 国平, 王明旭, 等. 振动加速因子试验方法研究 [J]. 振动、测试与诊断, 2013, 33(1): 35-39.
LI Qi-zhi, CHEN Guo-ping, WANG Ming-xu, et al. Test method of vibration acceleration factor[J]. Journal of vibration, measurement & diagnosis, 2013, 33(1): 35-39.
[128] 张方,周凌波,姜金辉,等. 基于频域法的随机振动疲劳加速试验设计[J]. 振动、测试与诊断,2016,36(4):659-664+807-808.
ZHANG Fang, ZHOU Ling-bo, JIANG Jin-hui, et al. Random vibration fatigue accelerated test design based on frequency domain methods[J]. Journal of vibration, measurement & diagnosis, 2016,36(4):659-664+807-808.
[129] 王冬梅,谢劲松. 随机振动试验加速因子的计算方法[J]. 环境技术,2010,2:47-51.
WANG Dong-mei, XIE Jin-song. Acceleration factor calculation method of random vibration test[J]. Environmental technology, 2010,2:47-51.
[130] 朱学旺, 张思箭,宁佐贵,等. 宽带随机振动试验条件的加速因子[J]. 环境技术,2014,6:17-20.
ZHU Xue-wang, ZAHNG Si-jian, NING Zuo-gui, et al. Accelerated testing factor on wideband random vibration[J]. Environmental technology, 2014,6:17-20.
[131] 韩雪山,牛淑梅,何渊井. 运输包装随机振动加速试验探讨[J]. 中国包装,2011(11):50-54.
HAN Xue-sahn, NIU Shu-qin, HE Yuan-jing. Discussion of transport packaging accelerated random vibration[J]. China packaging, 2011(11):50-54.
[132] 蒋瑜,陶俊勇,陈循. 超高斯随机振动疲劳加速试验模型研究[J]. 振动与冲击,2017,36(9):261-266.
JIANG Yu, TAO Jun-yong, CHEN Xun. Super-Gaussian random vibration fatigue accelerated testing model[J]. Journal of vibration and shock, 2017, 36(9): 261-266.
[133] Jiang Y, Yun G J, Zhao L, et al. Experimental design and validation of an accelerated random vibration fatigue testing methodology[J]. Shock and Vibration, 2015, 1-13.
[134] 王志伟,刘博,王立军. 基于G_rms-N的非高斯加速随机振动理论方法的有限元验证[J]. 应用力学学报,2020,37(6):2386-2397.
WANG Zhi-wei, LIU Bo, WANG Li-jun. The finite element verification of the non-gaussian acceleration random vibration theory method based on G_rms-N[J]. Chinese Journal of Applied Mechanics, 2020, 37(6):2386-2397.
[135] Chandran KSR. Mechanical fatigue of polymers: A new approach to characterize the S-N behavior on the basis of macroscopic crack growth mechanism [J]. Polymer, 2016, 91:222-238.
[136] Wang Z-W, Wang L-J. Accelerated random vibration testing of transport packaging system based on accelerated PSD[J]. Packaging Technology and Science, 2017, 30: 621-643.
[137] Wang Z-W, Wang L-J. On accelerated random vibration testing of product based on component acceleration RMS-life curve[J]. Journal of Vibration and Control, 2018, 24(15): 3384-3399.