Abstract：Aiming at the complex and changeable elastoplastic deformation stage of the dry gas seal friction interface, based on the characteristics of the asperities satisfying continuity, smoothness and monotonicity in the whole deformation process, the cosine function was used to explore the relationship between the contact surface deformation and the contact characteristics. Then, based on the statistical theory, the overall contact model of the friction interface is established. Finally, the established model is compared with the GW model, CEB model, ZMC model, KE model. Compared with the five classic models of the LIN model, the mechanical properties and influencing factors of the dry gas seal friction interface are obtained through theoretical analysis and numerical solution. The results show that: the model in this paper realizes the continuity, smoothness and monotonicity of the asperity in all stages of deformation; the contact load, contact area and contact stiffness are positively related to the dimensionless contact deformation; and the average contact distance of the dimensionless surface is negative. Correlation, and the smaller the average contact distance of the dimensionless surface, the greater the proportion of plastic deformation of the rough surface; in order to make the dry gas seal moving ring and static ring operate more reliably and smoothly, the contact surface between the moving ring and the static ring should be guaranteed. Try to be as smooth and flat as possible, so that the average contact distance of the dimensionless surface is controlled below 2.5.
翟霄，杨小成，陈金林，丁雪兴. 干气密封摩擦界面弹塑性接触刚度模型[J]. 振动与冲击, 2023, 42(10): 165-171.
ZHAI Xiao,YANG Xiaocheng,CHEN Jinlin,DING Xuexing . Elastic-plastic contact stiffness model of dry gas seal friction interface. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(10): 165-171.
[1] 陈源,彭旭东,李纪云,等.螺旋槽结构参数对干气密封动态特性的影响研究[J]. 摩擦学学报,2016, 36(04):397-405.
CHEN Yuan, PENG Xudong, LI Jiyun, et al. Influence of spiral groove structure parameters on dynamic characteristics of dry gas seal[J]. Journal of Tribology, 2016, 36(04):397-405.
[2] 王玉明,刘伟,刘莹.非接触式机械密封基础研究现状与展望[J].液压气动与密封, 2011, 31(02):29-33.
WANG Yuming, LIU Wei, LIU Ying. Basic research status and prospect of non-contact mechanical seal[J]. Hydraulics and Seals, 2011, 31(02):29-33.
[3] 丁雪兴,王平西,张伟政,等.螺旋槽干气密封环端面摩擦试验及其性能分析[J].化工学报,2017, 68(01):208-214.
DING Xuexing, WANG Pingxi, ZHANG Weizheng, et al. End face friction test and performance analysis of spiral groove dry gas seal ring[J]. Chinese Journal of Chemical Engineering, 2017, 68(01):208-214.
[4] Huang W F, Lin Y B, Gao Z, et al. An acoustic emission study on the starting and stopping processes of a dry gas seal for pumps[J]. Tribology Letters, 2013, 49(2):379-384
[5] Fan W, Huang W, Liu Y, et al. State Evolution of Dry Gas Seal during Repeated Start–Stop Operation Using Acoustic Emission Method[J]. Tribology Transactions, 2019, 63(1):173-181.
[6] Greenwood J A, Williamson J. Contact of nominally flat surfaces[J]. Proceedings of the Royal Society of London, 1966, 295(1442):300-319.
[7] CHANG W R, ETSION I, BOGY D B. An elastic-plastic model for the contact of rough surfaces[J]. Journal of Tribology, 1987, 109(2):257-263.
[8] ZHAO Y, MAIETTA D M, CHANG L. An asperity microcontact model incorporating the transition from elastic deformation to fully plastic flow[J]. Journal of Tribology, 2000, 122(1):86-93.
[9] Kogut L, Etsion I. Elastic-Plastic Contact Analysis of a Sphere and a Rigid Flat[J]. Journal of Applied Mechanics, 2002, 69(5):657-662.
[10] Kogut L, Etsion I. A Finite Element Based Elastic-Plastic Model for the Contact of Rough Surfaces[J]. Tribology Transactions, 2003, 46(3):383-390.
[11] BRIZMER V， KLIGERMAN Y， ETSION I. The effect of contact conditions and material properties on the elasticity terminus of a spherical contact[J]. International Journal of Solids and Structures, 2006, 43(18):5736-5749.
[12] Li P L, Lin J F. An Elastoplastic Microasperity Contact Model for Metallic Materials[J]. Journal of Tribology, 2005, 127(3):666-672.
[13] BRAKE M R. An analytical elastic-perfectly plastic contact model[J]. International Journal of Solids & Structures, 2012, 49(22):3129-3141.
[14] 李玲,云强强,王晶晶,等.具有连续光滑特性的结合面接触刚度模型[J].机械工程学报,2021,57(07):117-124.
LI Ling, YUN Qiangqiang, WANG Jingjing, et al. Contact stiffness model of joint surface with continuous smooth properties [J]. Chinese Journal of Mechanical Engineering, 2021, 57(07): 117-124.
[15] Xiao Huifang, Sun Yunyun. An improved virtual material based acoustic model for contact stiffness measurement of rough interface using ultrasound technique[J]. International Journal of Solids and Structures, 2018,155:240-247.
[16] 王晶晶,李玲,孙立泰,等.耦合基体变形与微凸体相互作用的结合面刚度模型[J/OL].机械工程学报:1-10[2022-05-04].http://kns.cnki.net/kcms/detail/11.2187.th.20220414.1028.046.html.
WANG Jingjing, LI Ling, SUN Litai, et al. Joint surface stiffness model for coupling matrix deformation and asperity interaction [J/OL]. Chinese Journal of Mechanical Engineering: 1-10 [2022-05-09]. http://kns.cnki.net/kcms/detail/11.2187.th.20220414.1028.046.html.
[17] 孙宝财, 丁雪兴, 陈金林, 等.干气密封摩擦界面法向接触刚度分形模型[J].振动与冲击, 2019, 38(18):248-255.
SUN Baocai, DING Xuexing, CHEN JinLin, et al. Fractal model for the normal contact stiffness of frictional interface in dry gas seals [J]. Vibration and Shock, 2019, 38(18):248-255.
[18] 孙雪剑, 宋鹏云, 毛文元, 等.考虑密封环材料属性和表面形貌干气密封启停阶段的动态接触特性分析[J].化工学报, 2021, 72(08):4279-4291.
SUN Xuejian, SONG Pengyun, MAO Wenyuan, et al. Analysis of dynamic contact characteristics of dry gas seal during start-up and stop considering seal ring material properties and surface morphology[J]. Acta Chemie Sinica, 2021, 72(08):4279-4291.
[19] JOHSON K L. Contact mechanics[J]. Cambridge University press, 1995, 84-106.
[20] Abbott E J . Specifying Surface Quality A Method Based on Accurate Measurement and Comparison[J]. Mechanical Engineering, 1933, 55(1):569-572.
[21] 温诗铸.摩擦学原理[M].清华大学出版社,1990.
WEN Shizhu. Tribological principle [M]. Tsinghua University Press, 1990.
[22] 傅卫平, 娄雷亭, 高志强, 等.机械结合面法向接触刚度和阻尼的理论模型[J].机械工程学报, 2017, 53(009):73-82.
FU Weiping, LOU Leiting, GAO Zhiqiang, et al. Theoretical model of normal contact stiffness and damping of mechanical joints[J]. Journal of Mechanical Engineering, 2017, 53(009):73-82
