A comparative study on rock breaking by a disc cutter under abrasive water jet-assisted and conventional working conditions
ZHANG Jinliang1, 2, LUO Xingchen3, YANG Fengwei1, 2, FU Jie4, XIA Yimin3, LUO Nanchuan3
1.Yellow River Engineering Consulting Co., Ltd., Zhengzhou 450003, China;
2.Key Laboratory of Water Management and Water Security for Yellow River Basin, Ministry of Water Resources (Under Construction), Zhengzhou 450003, China; 3.College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;
4.College of Materials Science and Engineering, Central South University, Changsha 410083, China
Abstract：To compare the rock-breaking characteristics of disc cutter under abrasive water jet-assisted and conventional working conditions, rock-breaking experiments under two working conditions were carried out. The differences in the rock-breaking state, disc cutter load, and rock-breaking efficiency were compared and analysed. The results show that compared with conventional rock-breaking of disc cutter, the rock-breaking of disc cutter under abrasive water jet-assisted can improve the ability of disc cutter to penetrate the hard rock, promote the expansion of cracks inside the rock interior, thereby generating large-size rock chip. The vertical and rolling force of the disc cutter under abrasive water jet-assisted is significantly lower than that of the conventional disc cutter rock breaking, with an average decrease of 39% and 25%. In addition, the amount of rock-breaking by disc cutter under abrasive water jet-assisted increases, and the rock-breaking efficiency is further improved, which is 1-2 times that of conventional rock-breaking of disc cutter. The research results provide a reference for improving the rock-breaking performance of disc cutters under hard rock geological conditions and efficient excavation of TBM.
张金良1, 2，罗星臣3，杨风威1, 2，傅杰4，夏毅敏3，罗南川3. 磨料水射流辅助与常规工况下滚刀破岩特性对比研究[J]. 振动与冲击, 2023, 42(12): 333-340.
ZHANG Jinliang1, 2, LUO Xingchen3, YANG Fengwei1, 2, FU Jie4, XIA Yimin3, LUO Nanchuan3. A comparative study on rock breaking by a disc cutter under abrasive water jet-assisted and conventional working conditions. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(12): 333-340.
[1] 李宏波, 孙振川, 周建军, 等. 一种新型TBM刀具磨损检测技术[J]. 振动与冲击, 2017, 36(24): 7-12.
Li Hongbo, Sun Zhenchuan, Zhou Jianjun, et al. A new wear detection technique for TBM cutters[J]. Journal of Vibration and Shock, 2017, 36(24): 7-12.
[2] Pan Y, Liu Q, Kong X, et al. Full-scale linear cutting test in Chongqing Sandstone and the comparison with field TBM excavation performance[J]. Acta Geotechnica, 2019, 14: 1249-1268
[3] 夏毅敏, 马劼嵩, 李正光, 等. 主梁式TBM关键结构参数对其动力学特性的影响规律[J]. 振动与冲击, 2020, 39(08): 193-201.
Xia Yimin, Ma Jiesong, Li Zhengguang, et al. The influence of key structural parameters of main beam TBM on its dynamic characteristics[J]. Journal of Vibration and Shock, 2020, 39(08): 193-201.
[4] Jin D, Shen Z, Yuan D. Effect of spatial variability on disc cutters failure during TBM tunneling in hard rock[J]. Rock Mechanics and Rock Engineering, 2020, 53: 4609-4621
[5] 吴鑫林, 张晓平, 刘泉声, 等. TBM岩体可掘性预测及其分级研究[J]. 岩土力学, 2020, 41(05): 1721-1729
Wu Xinlin, Zhang Xiaoping, Liu Quansheng, et al. Prediction and classification of rock mass boreability in TBM tunnel[J]. Rock and Soil Mechanics, 2020, 41(05): 1721-1729
[6] Xu H, Geng Q, Sun Z, et al. Full-scale granite cutting experiments using tunnel boring machine disc cutters at different free-face conditions[J]. Tunnelling and Underground Space Technology, 2021, 108: 103719
[7] Liu Q, Liu J, Pan Y, et al. A wear rule and cutter life prediction model of a 20-in TBM cutter for granite: A case study of a water conveyance tunnel in China[J]. Rock Mechanics and Rock Engineering, 2017, 50: 1303-1320
[8] Ning B, Xia Y, Lin L, et al. Experimental study on the adaptability of cutters with different blade widths under hard rock and extremely hard rock conditions[J]. Acta Geotechnica, 2020, 15: 3283-3294
[9] 杨成, 赖远明, 王旭, 等. 兰州地铁下穿黄河砂卵石地层中盾构刀具破岩的数值计算[J]. 振动与冲击, 2018, 37(08): 28-33.
Yang Cheng, Lai Yuanming, Wang Xu, et al. Numerical calculation of shield cutter in sandy pebble stratum of Yellow River for Lanzhou Subway[J]. Journal of Vibration and Shock, 2018, 37(08): 28-33.
[10] Hu Y, Li M, Fu Z, et al. Study on forming technology of TBM disc cutter ring[J]. Journal of Physics Conference Series, 2019, 1345(03): 032039
[11] 张魁, 杨长, 陈春雷, 等. 激光辅助TBM盘形滚刀压头侵岩缩尺试验研究[J]. 岩土力学, 2022, 43(01): 87-96
Zhang Kui, Yang Chang, Chen Chunlei, et al. Scale model test on laser-assisted rock indentation by TBM disc cutter indenter[J]. Rock and Soil Mechanics, 2022, 43(01): 87-96
[12] 庄欠伟, 袁一翔, 徐天明, 等. 射流联合盾构切削钢筋混凝土仿真与试验[J]. 岩土工程学报, 2020, 42(10): 1817-1824
Zhuang Qianwei, Yuan Yixiang, Xu Tianming, et al. Simulation and experiment on cutting reinforced concrete with jet combined shield method[J]. Chinese Journal of Geotechnical Engineering, 2020, 42(10): 1817-1824
[13] 李元辉, 卢高明, 冯夏庭, 等. 微波加热路径对硬岩破碎效果影响试验研究[J]. 岩石力学与工程学报, 2017, 36(06): 1460-1468
Li Yuanhui, Lu Gaoming, Feng Xiating, et al. The influence of heating path on the effect of hard rock fragmentation using microwave assisted method[J]. Chinese Journal of Rock Mechanics and Engineering, 2017, 36(06): 1460-1468
[14] Zhao J, Zhang G, Xu Y, et al. Mechanism and effect of jet parameters on particle waterjet rock breaking[J]. Powder Technology, 2017, 313: 231-244
[15] Lu Y, Xiao S, Ge Z, et al. Experimental study on rock-breaking performance of water jets generated by self-rotatory bit and rock failure mechanism[J]. Powder Technology, 2019, 346: 203-216
[16] 李洪盛, 刘送永, 郭楚文. 自振脉冲射流预制裂隙对机械刀具破岩过程温度影响特性[J].煤炭学报, 2021, 46: 2136-2145
Li Hongsheng, Liu Songyong, Guo Chuwen. Effect of crack prefabrication by self-oscillating pulsed jet on the temperature of conical pick during rock breaking processes[J]. Journal of China Coal Society, 2021, 46: 2136-2145
[17] Fenn O. The use of water jets to assist free-rolling cutters in the excavation of hard rock[J]. Tunnelling and Underground Space Technology, 1989, 4: 409-417
[18] Ciccu R, Grosso B. Improvement of disc cutter performance by water jet assistance[J]. Rock Mechanics and Rock Engineering, 2014, 47: 733-744
[19] Wang F, Zhou D, Zhou X, et al. Rock breaking performance of TBM disc cutter assisted by high-pressure water jet[J]. Applied Sciences, 2020, 10(18): 1-12
[20] Cheng J, Jiang Z, Han W, et al. Breakage mechanism of hard-rock penetration by TBM disc cutter after high pressure water jet precutting[J]. Engineering Fracture Mechanics, 2020, 240: 107320
[21] Zhang J, Li Y, Zhang Y, et al. Using a high-pressure water jet-assisted tunnel boring machine to break rock[J]. Advances in Mechanical Engineering, 2020, 12(10): 1-16
[22] 徐福通, 卢景景, 周辉, 等. 预切槽和 TBM 机械滚刀的新型联合破岩模式研究[J]. 岩土力学, 2021, 42(05): 1363-1372
Xu Futong, Lu Jingjing, Zhou Hui, et al. Research on combined rock-breaking mode of pre-cutting groove and TBM mechanical cutter[J]. Rock and Soil Mechanics, 2021, 42(05): 1363-1372
[23] 张旭辉, 胡定邦, 廖雅诗, 等. 临空面与常规工况下TBM滚刀切割红砂岩对比研究[EB/OL].应用基础与工程科学学报. https://kns.cnki.net/kcms/detail/11.3242.TB.20210927.2032.002.html
Zhang Xuhui, Hu Dingbang, Liao Yashi, et al. Comparative study on cutting red sandstone by TBM hob under free face and normal working conditions[EB/OL]. Journal of Basic Science and Engineering.https://kns.cnki.net/kcms/detail/11.3242.TB.20210927.2032.002.html
[24] Pan Y, Liu Q, Peng X, et al. Full-Scale Linear Cutting Tests to Propose Some Empirical Formulas for TBM Disc Cutter Performance Prediction[J]. Rock Mechanics and Rock Engineering, 2019, 52: 4763–4783
[25] 刘泉声, 潘玉丛, 刘建平, 等. 常截面滚刀贯入试验中岩石破坏行为分析[J]. 岩石力学与工程学报, 2016, 35(S2): 3516-3525
Liu Quansheng, Pan Yucong, Liu Jianping, et al. Analysis on fragmentation behavior of rocks in indentation tests by disc cutter[J]. Chinese Journal of Rock Mechanics and Engineering, 2016, 35(S2): 3516-3525
