Test study on vibration behavior and bearing load characteristics of high-speed train gearbox under internal excitation
ZHOU Yue1, WANG Xi1, HOU Yu1, QUE Hongbo1,2, GUO Rubing2, LIN Xinhai2,JIN Siqin2, WU Chengpan2
1. School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing 100044, China;
2. CRRC Qishuyan Locomotive and Rolling Stock Technology Research Institute Co., Ltd., Changzhou 213011, China
Abstract：Internal excitation is an important factor affecting the vibration of high-speed EMU gearbox and the dynamic load of gearbox bearing. Based on the gearbox transmission system test rig, the vibration response of the gearbox body and the bearing load of the gearbox were tested under various torque and speed conditions for high-speed EMU. The vibration signals of different parts of the gearbox under various operating conditions are analyzed, and it is found that the gear meshing frequency at specific rotation speeds can excite the modal resonance of the gearbox, while the torque can affect the frequency response characteristics of the system. Order tracking are performed on the gearbox vibration acceleration responses under increased rotation speed, and modal parameters of the gearbox are obtained through the order-based operational modal identification method, it is found that the operating mode vibration pattern of the gearbox cause the difference in vibration behavior at different rotation speeds. By comparing the root mean square of gearbox vibration acceleration and the measured bearing load coefficient of variation under different operating conditions, the correspondence between the dynamic characteristics of gearbox bearing load and gearbox vibration behavior is established.
周越1，王曦1，侯宇1，阙红波1,2，呙如兵2，林新海2，金思勤2，吴成攀2. 内部激励下高速列车齿轮箱振动行为及轴承载荷特性实验研究[J]. 振动与冲击, 2023, 42(13): 242-250.
ZHOU Yue1, WANG Xi1, HOU Yu1, QUE Hongbo1,2, GUO Rubing2, LIN Xinhai2,JIN Siqin2, WU Chengpan2. Test study on vibration behavior and bearing load characteristics of high-speed train gearbox under internal excitation. JOURNAL OF VIBRATION AND SHOCK, 2023, 42(13): 242-250.
[1] Kaharaman A, Singh R. Non-linear dynamics of a spur gear pair [J]. Journal of Sound and Vibration, 1990, 142(1): 49-75.
[2] Kaharaman A, Singh R. Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system [J]. Journal of Sound and Vibration, 1991, 146(1): 135-156.
[3] Maliha R, Dogruer, C U, Özguven H N. Nonlinear dynamic modeling of gear-shaft-disk-bearing systems using finite elements and describing functions [J]. Journal of Mechanical Design, Transactions of the ASME, 2004, 126(3): 534-541.
[4] SHEN Yong-jun, YANG Shao-pu, LIU Xiang-dong. Nonlinear dynamics of a spur gear pair with time-varying stiffness and backlash based on incremental harmonic balance method [J]. International Journal of Mechanical Sciences, 2006, 48(11): 1256-1263.
[5] Fernandez-del-Rincon A, Garcia P, Diez-Ibarbia A, et al. Enhanced model of gear transmission dynamics for condition monitoring applications: Effects of torque, friction and bearing clearance [J]. Mechanical Systems and Signal Processing, 2017, 85: 445-467.
[6] 朱海燕, 游学斌, 张翼, 等. 高速列车齿轮箱振动特性研究进展 [J]. 现代制造工程, 2018(11): 149-154.
ZHU Hai-yan, YOU Xue-bin, ZHANG Yi, et al. Research review on vibration characteristics of high-speed train gearbox [J]. Modern Manufacturing Engineering, 2018(11): 149-154.
[7] 常乐浩, 刘更, 吴立言. 齿轮综合啮合误差计算方法及对系统振动的影响 [J]. 机械工程学报, 2015, 51(01): 123-130.
CHANG Le-hao, LIU Geng, WU Li-yan. Determination of Composite Meshing Errors and Its Influence on the Vibration of Gear System [J]. Journal of Mechanical Engineering, 2015, 51(01): 123-130.
[8] 周建星, 刘更, 马尚君. 内激励作用下齿轮箱动态响应与振动噪声分析 [J]. 振动与冲击, 2011, 30(6): 234-238.
ZHOU Jian-xing, LIU Geng, MA Shang-jun. Vibration and Noise Analysis of The Gear Transmission System [J]. Journal of Vibration and Shock, 2011, 30(6): 234-238.
[9] 周建星, 刘更, 吴立言. 转速与负载对减速器振动噪声的影响研究 [J]. 振动与冲击, 2013, 32(8): 193-198.
ZHOU Jian-xing, LIU Geng, WU Li-yan. Research on The Effect of Operating Conditions on Vibration and Noise Radiation of a Gear Reducer [J]. Journal of Vibration and Shock, 2013, 32(8): 193-198.
[10] GUO Yi, Keller J. Investigation of high-speed shaft bearing loads in wind turbine gearboxes through dynamometer testing [J]. Wind Energy, 2018, 21(2): 139-150.
[11] HOU Yu, WANG Xi. Measurement of load distribution in a cylindrical roller bearing with an instrumented housing: Finite element validation and experimental study [J]. Tribology International, 2021, 155: 106785.
[12] WANG Zhi-wei, MEI Gui-ming, ZHANG Wei-hua, et al. Effects of polygonal wear of wheels on the dynamic performance of the gearbox housing of a high-speed train [J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2018, 232(6): 1852–1863.
[13] WEI Jing, ZHANG Ai-qiang, WANG Gang-qiang, et al. A study of nonlinear excitation modeling of helical gears with Modification-Theoretical analysis and experiments [J]. Mechanism and Machine Theory, 2018, 128: 314-335.
[14] 徐向阳, 朱才朝, 张晓蓉, 等. 大功率船用齿轮箱试验模态分析 [J]. 振动与冲击, 2011, 30(7): 266-270.
XU Xiang-yang, ZHU Cai-chao, ZHANG Xiao-rong, et al. Experimental Modal Analysis of a Heavy Duty Marine Gearbox [J]. Journal of Vibration and Shock, 2011, 30(7): 266-270.
[15] 李康强, 冯志鹏. 基于EMD和能量算子的模态参数识别在行星齿轮箱中的应用 [J]. 振动与冲击, 2018, 37(8): 1-8.
LI Kang-qiang, FENG Zhi-peng. Modal Parameter Identification Based on Empirical Mode Decomposition and Energy Operator for Planetary Gearboxes [J]. Journal of Vibration and Shock, 2018, 37(8): 1-8.
[16] 张 涛, 李 强, 王 曦, 等. 高速列车齿轮箱箱体在位模态识别 [J]. 机械工程学报, 2018, 54(12): 31-41.
ZHANG Tao, LI Qiang, WANG Xi, et al. Modal Identification of Gearbox Housing of High Speed Train under Assembly Condition [J]. Journal of Mechanical Engineering, 2018, 54(12): 31-41.
[17] 胡伟钢. 高速列车齿轮箱载荷特征及应变场识别方法研究[D]. 北京：北京交通大学, 2019.
HU Wei-Gang. Load Characteristic and Strain Field Identification Method of High-Speed Train Gearbox [D]. Beijing: Beijing Jiaotong University, 2019.
[18] Peeters B, Roeck G. D. Stochastic system identification for operational modal analysis: A Review [J]. Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME, 2001, 123(4): 659–667.
[19] Peeters B, Van-der-Auweraer H, Guillaume P, et al. The PolyMAX frequency-domain method: A new standard for modal parameter estimation? [J]. Shock and Vibration, 2004, 11(3–4): 395–409.
[20] Janssens K, Kollar Z, Peeters B, et al. Order-based resonance identification using operational PolyMAX [C]. Proceedings of the International Modal Analysis Conference (IMAC), 2006. 566-575.
[21] Sternharz G, Kalganova T, Mares C, et al. Comparative performance assessment of methods for operational modal analysis during transient order excitation [J]. Mechanical Systems and Signal Processing, 2022, 169.
[22] 查浩, 任尊松, 徐宁. 高速动车组轴箱轴承振动特性 [J]. 机械工程学报, 2018, 54(16): 144-151.
ZHA Hao, REN Zun-song, XU Ning. Vibration Performance of High-speed Vehicles with Axle Box Bearing [J]. Journal of Mechanical Engineering, 2018, 54(16): 144-151.
[23] 查浩, 任尊松, 徐宁. 高速动车组轴箱轴承滚道载荷特性研究 [J]. 机械工程学报, 2020, 56(4): 135-142.
ZHA Hao, REN Zun-song, XU Ning. Load Characteristics of Axle Box Bearing Raceway of High-speed EMU [J]. Journal of Mechanical Engineering, 2020, 56(4): 135-142.
[24] Evans R, Houpert L, Scandella F, et al. Dynamic analysis of rail gearbox bearings [J]. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 2017, 231(8): 991-996.
[25] WANG Zhi-wei, ZHANG Wei-hua, YIN Zhong-hui, et al. Effect of vehicle vibration environment of high-speed train on dynamic performance of axle box bearing [J]. Vehicle System Dynamics, 2019, 57(4): 543-563.
[26] Brandt Anders. Noise and Vibration Analysis: Signal Analysis and Experimental Procedures [M]. Chichester, UK: John Wiley & Sons, 2011.
[27] Harris T A, Kotzalas M N. Rolling bearing analysis: Essential concepts of bearing technology [M]. Florida: Taylor & Francis, 2007.
