非线性渐变刚度钢板弹簧疲劳分析载荷谱编制方法

摘要
图/表
参考文献(12)
相关文章 (15)

全文: PDF (984 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要提出了一种适用于非线性渐变刚度钢板弹簧疲劳可靠性分析评价的载荷谱编制方法。在ANSYS中建立考虑非线性接触的钢板弹簧总成有限元模型并根据台架试验结果进行参数识别，获得了簧片上任意点应力与形变之间的非线性对应关系。在试验场采集获得钢板弹簧在强化路面下的加速度信号，通过处理，获得了板簧弧高随时间变化的信号。结合应力与弧高的对应关系以及弧高随时间变化的信号，精确获得了强化路面下钢板弹簧疲劳热点区域的应力载荷谱。采用雨流计数法对编制获得的载荷谱进行分级计数并依此为基础对疲劳热点进行可靠性分析，预测结果与道路试验相吻合。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	韩为铎
	卢剑伟
	莫家奇

关键词 ：变刚度, 钢板弹簧, 载荷谱编制, 疲劳可靠性

Abstract：A method for load spectrum compilation suitable for the fatigue reliability analysis of nonlinear leaf springs with varying stiffness was presented.A finite element model for leaf springs with consideration of the nonlinear contact was established with the software ANSYS.The model parameters were identified by using bench test method.Based on the model,the nonlinear relation between stress and deformation at any point was obtained.The arc height signal of the leaf assembly installed in a car running on intensified road was obtained by measuring and processing its acceleration signal. Based on the relation between stress and deformation signals,the accurate stress spectrum of hot spots was calculated.A fatigue reliability analysis using the compiled load spectrum counted by rain-flow counting method was carried out and the results coincide well with those in road test.

Key words： varying stiffness leaf spring load spectrum compilation fatigue reliability

收稿日期: 2015-10-09 出版日期: 2017-03-15

引用本文:

韩为铎,卢剑伟,莫家奇. 非线性渐变刚度钢板弹簧疲劳分析载荷谱编制方法[J]. 振动与冲击, 2017, 36(6): 241-245.
HAN Weiduo,LU Jianwei,MO Jiaqi. Load spectrum compilation method for the fatigue analysis of leaf springs with nonlinear varying stiffness. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(6): 241-245.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2017/V36/I6/241

[1]   Haiba M, Barton D C, Brooks P C, et al. Review of life assessment techniques applied to dynamically loaded automotive components[J]. Computers & structures, 2002, 80(5): 481-494.
[2]   Bishop N W M.The Use of Frequency Domain Parameters to Predict Structural Fatigue [D].University of Warwick,UK,1988.
[3]   方吉, 兆文忠, 朴明伟. 基于模态叠加法的焊接结构疲劳寿命预测方法研究[J]. 振动与冲击, 2015, 34(5): 186-192.
FANG Ji, ZHAO Wen-zhong, PIAO Ming-wei. Fatigue life prediction of welded structures based on modal superposition method.[J]. Journal of Vibration and Shock,2015, 34(5): 186-192.
[4]   石湘. 渐变刚度钢板弹簧的模拟仿真[D]. 华中科技大学, 2007.
[5]   顾永梁. 少片钢板弹簧的结构设计与疲劳寿命计算 [D]. 湖南大学,2012.
[6]   Kong Y S, Omar M Z, Chua L B, et al. Fatigue life prediction of parabolic leaf spring under various road conditions[J]. Engineering Failure Analysis, 2014, 46: 92-103.
[7]   徐庆华. 试采用 FFT 方法实现加速度, 速度与位移的相互转移[J]. 振动. 测试与诊断, 1997, 17(4): 30-34.
Xu Qinghua. Conversion between vibrational acceleration,velocity and displacement using FFT [J]. Journal of Vibration, Measurement & Diagnosis, 1997, 17(4): 30-34.
[8] Hong Y H, Kim H K, Lee H S. Reconstruction of dynamic displacement and velocity from measured accelerations using the variational statement of an inverse problem[J]. Journal of Sound and Vibration, 2010, 329(23): 4980-5003.
[9] 胡玉梅, 周英杰, 朱浩,等. 基于趋势项误差控制的频域积分算法研究与应用[J]. 振动与冲击, 2015(2):171-175.
HU Yu-mei;ZHOU Ying-jie;ZHU Hao;CHEN Xian-liang;SUN Ji-ming;PI Yang-jun. The research and applicationof integration algorithm based on trend-control infrequency domain. JOURNAL OF VIBRATION AND SHOCK, 2015, 34(2): 171-175.
[10]   机械工程材料性能数据手册编委会. 机械工程材料性能数据手册[M]. 北京：机械工业出版社,1995.
[11]   王正, 王增全. 基于应力-强度干涉的车用发动机机械零部件 B10 寿命计算方法 [J]. 机械工程学报, 2014, 50(16): 47-53.
WANG Zheng, WANG Zengquan. Method for Calculating the B10 Reliable Life of Mechanical Components of Vehicle Engine Based on the Stress-strength Interference [J]. Journal of Mechanical Engineering, 2014, 50(16): 47-53.
[12]   朱茂桃, 熊梦锦, 何志刚, 等. 钢板弹簧疲劳分析[J]. 农业机械学报, 2006, 37(3): 149-152.
Zhu Maotao, Xiong Mengjin, He Zhigang, et al. Fatigue Analysis for Leaf Spring [J]. Transactions of the Chinese Society for Agricultural Machinery, 2006, 37(3): 149-152.