Abstract:In order to study the dynamic mechanical property of 2A16 aluminum alloy and the influence of heat treatment on its strain rate sensitive property, tests for 2A16 aluminum alloy(heat-treated condition O and T4) under quasi-static and intermediate strain rate were performed by using an electronic universal testing machine and a high velocity hydraulic servo-testing machine at room temperature. The stress-strain curves under different strain rates were obtained, and a modified Johnson-Cook constitutive model was fitted. The results show that the heat-treated condition has a big influence on the strain rate sensitive property of 2A16 aluminum alloy between 10-4~102s-1, and the strain rate hardening effect of 2A16-O aluminum alloy is obvious but which for 2A16-T4 aluminum alloy is not obvious, in addition, the strain hardening effect is obvious for both of the materials between 10-4~102s-1. Moreover, the modified Johnson-Cook constitutive model can predict the test results very well.
惠旭龙 白春玉 葛宇静 舒挽 . 2A16铝合金中应变率力学性能研究[J]. 振动与冲击, 2017, 36(19): 66-70.
Xi Xu-long, Bai Chun-yu, Ge Yu-jing,Shu Wan . Dynamic mechanical property for 2A16 aluminum alloy under intermediate strain rate. JOURNAL OF VIBRATION AND SHOCK, 2017, 36(19): 66-70.
[1] 谢灿军,童明波,刘富等,7075 -T6 铝合金动态力学试验及本构模型研究[J],振动与冲击,2014,33(18):100-114
XIE Can-jun,TONG Ming-bo,LIU Fu,etc. Dynamic tests and constitutive model for 7075-T6 aluminum alloy [J]. Journal of Vibration and Shock, 2014, 33(18):110-114.
[2] T. Masuda, T. Kobayashi, L. Wang, H. Toda. Effects of Strain Rate on Deformation Behavior of A6061-T6. Materials Science Forum. 2003,426~432(1):285~90
[3] 朱耀,AA 7055 铝合金在不同温度及应变率下力学性能的实验研究[D]。哈尔滨工业大学,工学博士论文,2010
Zhu Yao, EXPERIMENTAL RESEARCH ON MECHANICALPROPERTIES OF AA 7055 ALUMINUM ALLOYS AT DIFFERENT TEMERATRUES AND STRAIN RATES [D], Harbin Institute of Technology, Doctor of Engineering, 2010
[4] 李娜,李玉龙,郭伟国. 3种铝合金材料动态性能及其温度相关性对比研究[J]. 航 空 学 报,2008,29(4):903-908.
Li Na, Li Yulong, Guo Weiguo. Comparision of Mechnical Properties and their Temperature Dependence for Three Aluminum Alloys Under Dynamic Load [J]. ACTA AERONAUTICA ET ASTRONAUTICA SINICA. 2008, 29(4): 903-908.
[5] D. L. Holt, S. G. Babcock, S. J. Green, C. J. Maiden. The Strain-Rate Dependence of the Flow Stress in Some Aluminum Alloys. Transactions of the Asm: Transactions Quarterly. 1967, 60(2): 152~159
[6] U. S. Lindholm, R. L. Bessey, G. Y. Smith. Effect of Strain Rate on Yield Strength, Tensile Strength, and Elongation of Three Aluminum Alloys. J Mater 1971;6(1):119~33
[7] Ravi Shriram Yatnalkar. Experimental Investigation of Plastic Deformation of Ti-6Al-4V under Various Loading Conditions [D]. The Ohio State :The Ohio State University, 2010.
[8] P.K.C.Wood, C.A.Schley, S.Kenny, T.Dutton. Validating Performance of Automotive Materials at High Strain Rate for Improved Crash Design[C]. 9th International LS-DYNA Users Conference, Detroit, 2006.
[9] 白春玉,刘小川,周苏枫等,中应变率下材料动态拉伸关键参数测试方法[J],爆炸与冲击,2015,35(4):507-512.
Bai Chun-yu, Liu Xiao-chuan, Zhou Su-feng, etc,Material key parameters measurement method in the dynamic tensile testing at intermediate strain rate[J],EXPLOSION AND SHOCK WAVES,2015,35(4):507-512.
[10] Johnson G R, Cook W H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C]. In: Proceedings of the 7th International Symposium on Ballistics, The Hague ,Netherlands, 1983:541-547.
[11] Kang, W.J. Cho, S.S., Huh, H., Chung, D.T., 1999. Modified Johnson–Cook modelfor vehicle body crashworthiness simulation. Int. J. Vehicle Des. 21, 424–435.
[12] Cowper, G.R., Symonds, P.S., 1957. Strain Hardening and Strain Rate Effects in the Impact Loading of Cantilever Beams. Brown University Division of Applied Mathematics Report, pp. 28.
[13] H. Huh, W. J. Kang, S. S. Han, A Tension Split Hopkinson Bar for Investigating the Dynamic Behavior of Sheet Metals [J], Exp. Mech, 2002, 42: 8-17.