Impact energy release experiment on an energetic jet
DU Ye1 LI Qiang2
1. Research Center of Projectiles and Rockets Simulation,North University of China, Taiyuan 030051,China;
2. Unit 96786 of the PLA,Beijing 102202,China
Abstract:The impact energy release characteristics of an energetic jet was analysed based on the building of a dynamic energy acquisition system.The overpressure versus time curves produced by the energetic jet impinging plate were obtained under different impact conditions, and the composition of reaction products was determined.The results show that with the increase of the impact energy, the overpressure peak and energy release formed by the jet both show a tendency to increase progressively, and there is an upper limit of impact energy which can make the energetic material reach the staurated state of chemical reaction.The average amount of heat that the jet can release is 65.4 kJ containing 4.4 g, which is enough to achieve damage.
杜烨1 李强2 . 含能射流冲击释能实验研究[J]. 振动与冲击, 2018, 37(18): 266-270.
DU Ye1 LI Qiang2. Impact energy release experiment on an energetic jet. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(18): 266-270.
[1]胡忠武,李中奎,张延杰等.药型罩材料的发展[J].稀有金属材料与工程,2004,33(10):1009-1012.
Hu Zhongwu, Li Zhongkui, Zhang Tingjie. Advanced Progress in Materials for Shaped Charge and Explosively Formed Penetrator Liners[J]. RARE METAL MATERIALS AND ENGINEERING,2004, 33(10):1009-1012.
[2] Chaiat D.Future P/M materials for kinetic energy penetrators and shaped charge liners.Powder metallurgy in defense technology, 1981, vol7, PP185 -195.
[3] Laszlo J K,William P W. Investigation of a bulk metallic glass as a shaped charge liner material[C]//23rd International Symposium on Ballistics Tarragona, Tarragona, Spain, 2007: 31-38.
[4] 潘念侨,杜忠华,徐瑞.钨骨架/Zr基非晶合金材料的静态力学行为[J].有色金属科学与工程,2016,01: 48
-53.
PAN Nianqiao,DU Zhonghua,XU Lu.Static mechanical behavior of tungsten skeleton/Zr based amorphous alloy composite material[J]. Nonferrous Metals Science and Engineering, 2016,01: 48-53.
[5] 潘念侨. Zr基非晶合金材料动态本构关系及其释能效应研究[D].南京:南京理工大学,2016
PAN Nianqiao. Dynamic Zr based amorphous alloy material constitutive relation and release energy effect research [D].Nanjing:Nanjing University of Science and Technology, 2016
[6] AmesR G. Energy release characteristics of impact-initiated energetic materials[C]. 2006 Materials Research Society, Triangle Park, North Carolina, 2006.
[7] W Mock, JrHolt W H. Inpact initiation of pressed polytetnafluoroe thylene and alum inum powders[C]. 14th APS Topical Conference on Shock Compreesion of Condensed Matter Baltinore M D, 2005.
[8] 拜云山,冯晓伟,梁 斌等.基于正交数值试验的反应装甲干扰射流参数敏感性研究[J]. 振动与冲击,2017,36(9):86-92
BAI Yunshan,FENG Xiaowei,LIANG Bin etc.
Parametric sensitivity of explosive reactive armor disturbance jet based on orthogonal numerical tests. [J].Journal of vibration and shock, 2017,36(9):86-92
[9] 赵传荣,孔德仁,王胜强等.飞片厚度对冲击波压力峰值衰减特性的影响分析[J].振动与冲击,2016,35(3):135-138
ZHAO Chuan-rong,KONG De-ren,WANG Shen -qiang etc. Influence of flyer's thickness on the attenuation characteristics of shock wave's pressure peak[J].Journal of vibration and shock, 2016,35(3):135-138
[10] Eakins D E,Thadhani N N. Mechanistic aspects of shock-induced reactions in Ni-Al powder mixtures[C]. 15th APS Topical Conference on Shock Compression of Condensed Matter. Kohala Coast: APS, 2007.
[11]Myriski B. Shear-driven reactive material combustion at high-speed impact[C]. 2005 Joint Classified Warheads and Ballistics Symposium, Colorado, America, 2005.
[12]Richard G .A. Vented Chamber Calorimetry for Impact-Initiated Energetic Materials [A].The Proceedings of 43rd AIAA, 2005:279.
[13]张先锋,赵晓宁,乔良. 反应金属冲击反应过程的理论分析[J].爆炸与冲击,2010,30 (2): 145-151.
Zhang Xianfeng, Zhao Xiaoning, Qiao Liang. Theoretical analysis of impact reactive metal[J]. Explosion and Shock Waves, 2010,30 (2): 145-151.
[14] Walker F E,Wasley R J. Critical Energy for Shock Initiation of heterogeneous Explosives. Explosive Stoffe, 1969,17(1):9.
[15] 刘迎彬. 聚能粒子流的形成与侵彻研究[D]. 合肥: 中国科学技术大学,2012.
Liu Yingbing. Study on the formation and penetration of shaped charge particles[D]. Hefei: University of Science & Technology China,2012.