1.College of Mechanical Engineering, Liaoning Technical University,Fuxin,123000, China;
2.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116023, P.R.China;
3.Sichuan University of Science & Engineering, Material Corrosion and Protection Key Laboratory of Sichuan Province, Sichuan 643000,China
In order to improve the rock breaking speed and efficiency, a dynamics simulation analysis was done by using the ABAQUS analysis software to study the process of continuously crushing hard rock under the rotary-impact load from a hydraulic drill. The effects of the impact frequency, rotary speed and initial crustal stress on the rock breaking efficiency were discussed. The numerical simulation analysis results show that: the rock breaking speed increase with the increase of rotary speed. When the rotary speed is up to 300r/min, the rock breaking speed is almost no longer changed and the rock breaking efficiency reaches the maximum. As the impact frequency increases, the rock breaking speed increases obviously, and at 70 Hz achieves the highest rock breaking efficiency. Different initial crustal stress conditions have little influence on the rock breaking speed, but it has a great impact on the efficiency of rock breaking. The results provide an important theoretical reference and numerical basis for improving the rock breaking effect of rock drills in practical engineering.
张强1,2,3 索江伟1王海舰1 孙国庆1 孙赫威1. 基于ABAQUS的凿岩机钻头破岩数值模拟分析[J]. 振动与冲击, 2018, 37(1): 136-141.
ZHANG Qiang1,2,3,SUO Jiang-wei1,WANG Hai-jiang1,SUN Guo-qing1,SUNHe-wei1. Numerical simulation analysis on the drill bit rock breaking process based on ABAQUS. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(1): 136-141.
[1] 孙延宗,孙继业.岩巷工程施工掘进工程[M].北京：冶金工业出版社,2011.
SUN Yan-zong, SUN Ji-ye.Rock roadway engineering construction[M].Beijing:Metallurgical Industry Press,2011.
[2] 李俊伟,康敬东,李金鹏.凿岩台车钻头破岩有限元仿真分析[J].产品•技术,2015(11):75-77.
LI Jun-wei,KANG Jin-dong,LI Jin-peng.Finite element simulation analysis for the drill bit of the jumbo to break the rock[J]. Technology & Management,2015(11):75-77.
[3] 李玮，纪照生，董智煜，等.基于重整化方法的冲击载荷下岩石振动分析[J].振动与冲击,2016,35 (16):49-54.
LI Wei,JI Zhao-sheng,DONG Zhi-yu,et al.Vibration analysis of rock under impact loads based on the renormalization method[J].Journal of Vibration and Shock,2016,35 (16):49-54.
[4] 董学成, 熊继有，王国华，等.震荡冲击器破岩机理数值模拟分析[J].西南石油大学学报(自然科学版),2014，36(6):160-166.
DONG Xue-cheng,XIONG Ji-you, WANG Guo-hua,et al.Numericalsimulation analysisof rock breaking mechanismfor oscillation impacter[J]. Journal of SouthwestPetroleum University (Science & Technology Edition), 2014,36(6):160-166.
[5] 何霞，王德贵，刘清友，等.空气锤钻头破岩机理仿真分析[J].石油机械，2001(7):15-19.
HE Xia,WANG De-gui,LIU Qing-you,et al.Air hammer bit breaking rock mechanism simulation analysis[J]. China Petroleum Machinery, 2001(7):15-19.
[6]卜长根，龚汉松，夏柏如. 空隙率对潜孔锤凿岩瞬态冲击过程的影响[J]. 探矿工程(岩土钻掘工程)，2011，38(4):6-9 .
BU Chang-gen,GONG Han-song,XIA Bo-ru.Simulation study of rock voids rate affecting on impact force of DTH hamme[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2011,38(4):6-9 .
[7]黄志强，范永涛，魏振强，等.冲旋钻头破岩机理仿真研究[J].西南石油大学学报(自然科学版),2010,32(1):148-150 .
HUANG Zhi-qiang,FAN Yong-tao，WEI Zhen-qiang,et al.Simulation study on rock breaking mechanism of the percussion rotary drill[J].Journal of Southwest Petroleum University(Science&Technology Edition), 2011, 32(1): 148-150.
[8]祝效华，李 海.PDC切削齿破岩效率数值模拟研究[J]. 应用基础与工程科学学报,2015,23(1):182-191.
ZHU Xiao-hua,LI Hai.Numerical simulation on mechanical special energy of PDC cutter rock-cutting[J]. Journal of Basic Science and Engineering, 2015,23(1):182-191.
[9] 祝效华，罗衡，贾彦杰.考虑岩体疲劳损伤的空气冲旋钻井破岩数值模拟研究[J].岩石力学与工程学报, 2012,31(4):754-761.
ZHU Xiao-hua,LUO Heng,JIA Yan-jie.Numerical analysis of air hammer bit drilling based on rock fatigue model[J]. Chinese Journal of Rock Mechanics and Engineering, 2012,31 (4): 754- 761.
[10]舒敏飞，何清华，赵宏强，等. 液压凿岩机冲击压力及冲击性能仿真研究[J].武汉理工大学学报，2011,33(8):133-137.
SHU Min-fei,HE Qing-hua,ZHAO Hong-qiang, etal.Study on simulation of impact performance and working pressure of hydraulic drifter [J]. Journal of Wuhan University of Technology, 2011, 33(8):133- 137.
[11] Bu C.G., Qu Y.G., Cheng Z.Q., Liu B.L. Numerical simulation of impact on pneumatic DTH hammer percussivedrilling[J]. Journal of Earth Science, 2009,20(5):868-878 .
[12]李侯清. 重型液压凿岩机冲击机构及其液压驱动系统研究[D]. 长沙:中南大学, 2010.
LI Hou-qing.Research on driving system of heavy hydraulic rock drill impact mechanism and hydraulic [D]. ChangSha: Central South University,2010.
[13] 肖诗云，林皋，王哲.Drucker-Prager材料一致率型本构模型[J].工程力学，2003,20(4):147-151.
XIAO Shi-yun,LIN Gao,WANG Zhe. A drucker-prager consistent rate-dependent model[J]. Engineering Mechanics,2003,20(4): 147-151.
[14] 刘金龙，栾茂田，许成顺，等.Drucker-Prager 准则参数特性分析[J].岩石力学与工程学报，2006,25(s2):4010-4015.
LIU Jin-long,LUAN Mao-tian,XU Cheng-shun, etal.Studyonparametriccharactersofdrucker-prager[J].ChineseJournalofRockMechanicsand Engineering,2006,25(s2):4010-4015.
[15]刘泉声，胡云华，刘 滨.基于试验的花岗岩渐进破坏本构模型研究[J].岩土力学，2009,30(2):289-296.
LIU Quan-sheng,HU Yun-hua,LIU Bin.Progressive damage constitutive models of granite based on experimental results [J]. Rock and Soil Mechanics,2009,30(2):289-296.
[16] Hartwan, HowardL.The simulation of percussion dilling in The laboratory by indexed-blow studies[ C] .SPE500-PA,
1963.
[17] 田文元.轻型独立回转液压凿压机的研究[D]. 沈阳:东北大学，2005.
TIAN Wen-yuan.Research on portable independent rotary hydraulic rock drill[D]. Shenyang:Northeastern University, 2005.
[18]罗超文，李海波，刘亚群.深埋巷道地应力测量及围岩应力分布特征研究[J].岩石力学与工程学报，2010,29(7): 1418-1423.
LUO Chao-wen,LI Hai-bo,LIU Ya-qun.Study of distributing characteristics of stress in surrounding rock masses and in-situstress measurement for deeply buried tunnels[J].Chinese Journal of Rock Mechanics and Engineering,2010,29(7): 1418-1423.
