Effect of the perturbation in cutting fluid on the transverse vibration frequency in BTA deep-hole boring bar system
ZHAO Wu1, HUO Boyi1, HUANG Dan2,3, ZHAO Jian1
1.School of Mechanical and Power Engineering, Henan Polytechnic University, Jiaozuo 454000, China;
2.School of Materials Science and Engineering, Henan Polytechnic University, Jiaozuo 454000, China;
3.International Joint Research Laboratory of High Performance Light Metal and Its Numerial Simulation, Jiaozuo 454000, China
Abstract：Considering fluid-solid coupling and free liquid surface effect of the inner and outer cutting fluid, it is proposed a transverse vibration model for BTA deep-hole boring bar system, in order to reveal the effect of the cutting fluid perturbation on the lateral vibration frequency in such system. Consequently, the first order and second order frequency expressions were analyzed under different conditions. The free liquid surface variation can be indicated by the cross section areas on inner and outer fluids and the added mass from boring bar. By way of calculation, the sensitivities of the frequency in the BTA system to the flow rate of cutting fluid and the axial force of the system can be determined, as well as the tendency of the motion transformation. The sensitivity of transverse vibration frequency of BTA deep-hole boring bar to axial force is as follows: in the resonant ridges region, when there is no free liquid surface both in inner and outer cutting fluids, it is the maximum; when both inner and outer cutting fluids have free liquid surface, it is the minimum; in the resonant wings region, the maximum is when inner cutting fluids have free liquid surface, the minimum is when both inner and outer cutting fluids have no free liquid surface.The sensitivity of transverse vibration frequency of BTA deep-hole boring bar to cutting fluid velocity is as follows: in resonance ridges region, the maximum is when inner cutting fluid has free surface, and the minimum is when inner and outer cutting fluid have no free surface; in resonance wings region, the maximum is when inner and outer cutting fluid have no free surface, and the minimum is when inner cutting fluid has free surface. Bending and buckling would occur once the flow rate of cutting fluid and the axial force get up to the critical equivalence in the system. Further, in case of static instability, under higher flow rate, some complicated motions such as coupling flutter with mixed orders mode would occur in the system. The results above can provide some theoretical guides for the practice in BTA boring machining.
赵武1，霍博义1，黄丹2,3，赵建1. 切削液扰动对BTA深孔加工系统横向振动频率的影响[J]. 振动与冲击, 2020, 39(11): 184-192.
ZHAO Wu1, HUO Boyi1, HUANG Dan2,3, ZHAO Jian1. Effect of the perturbation in cutting fluid on the transverse vibration frequency in BTA deep-hole boring bar system. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(11): 184-192.
[1] 赵武. BTA深孔钻杆的力学行为研究[D]. 秦皇岛: 燕山大学, 2003.
WU Zhao. Study on the Mechanics Behavior of BTA Deep Hole Drill Shaft [D]. Qin Huang Dao, China, Yanshan University, 2003.
[2] DaGuo Yu. Deep hole drill with positive taper and principle for elimination of drill deviation using cutting fluid [J]. The International Journal of Advanced Manufacturing Technology, 2017, 89 (9-12): 3195-3206.
[3] DaGuo Yu, Rongtao Zhang, Ruixuan Li. Guidance principle of deep-hole cutting tools based on fluid wedge effect [J]. Institution of Mechanical Engineers, 2017, 231 (14): 2585-2595.
[4] N.N. Moiseyev, V.V. Rumyantsev. Dynamic stability of bodies containing fluid [M]. New York: Spring- Verlag New York Inc,1968.
[5] 胡占齐, 赵武, 缪磊. BTA深孔加工中流体力引起的深孔钻杆涡动的研究[J]. 机械工程学报, 2005, 41(1): 230-233.
HU Zhan-qi, WU Zhao, MIAO Lei. Research on Vortex Motion of BTA Drilling Shaft Caused by Hydro-Force [J]. Chinese Journal of Mechanical Engineering, 2005, 41(1): 230-233.
[6] 张全斌. BTA系统导向套偏心触发切削液耦合机制的钻杆偏动量研究[D]. 焦作: 河南理工大学, 2015.
ZHANG Quan-bin. Research on Eccentricity Mechanism of BTA Boring Machining System Induced By Cutting Fluid Coupled Eccentric Pilot [D]. Jiao Zuo, China, Henan Polytechnic University, 2015.
[7] Jean-Paul Denise. Flutter of Cylindrical Shells Conveying Fluid [D]. Montreal, Canada, McGill University, 1971.
[8] Paidoussis M P, Li G. X. Pipes Conveying Fluid a Model Dynamical Problem [J]. Journal of Fluids & Structures, 1993, 8: 137-204.
[9] Young-Wann Kim, Young-Shin Lee, Sung-Ho Ko. Coupled Vibration of Partially Fluid-filled Cylindrical Shells with Ring Stiffeners [J]. Journal of Sound and Vibration, 2004, 276 (3): 869-897.
[10] M Chiba. Free vibration of a partially liquid‐filled and partially submerged, clamped‐free circular cylindrical shell [J]. Journal of the Acoustical Society of America, 1996, 100 (4): 2170-2180.
[11] E Askari, KH Jeong, M Amabili. Hydroelastic vibration of circular plates immersed in a liquid-filled container with free surface [J]. Journal of Sound & Vibration, 2013, 332(12): 3064-3085.
[12] P Wang, TY Li, X Zhu, WJ Guo, et al. An Analytical Solution for Free Flexural Vibration of a Thin Cylindrical Shell Submerged in Acoustic Half-Space Bounded by a Free Surface [J]. International Journal of Structural Stability and Dynamics, 2018, 18 (03): 759-767.
[13] C Zhu. Dynamic behaviour of a rotor partially filled with fluid in the unstable region [J]. Acta Aeronautica Et Astronautica Sinica, 2001, 22 (2): 155-159.
[14] T Keisenberg, G Ostermeyer, Synchronization effects in rotors partially filled with fluid‐influence on propulsion [J], Pamm, 2016 , 16 (1): 277-278.
