Tests for a coal planer knives’ cutting loads and its head’s vibration characteristics
CHEN Hongyue1,2,3, WEI Yufeng1, MAO Jun1,2, LIU Hui1
1. College of Mechanical Engineering, Liaoning Technical University, Fuxin 123000, China;
2.National-local Joint Research Center of Mine Hydraulic Technology and Equipment Engineering, Fuxin 123000, China;
3. Dynamic Test and Big Data Analysis Center of High-end Comprehensive Mining Complete Equipment,
Coal Industry Association, Fuxin123000, China
Abstract：To reveal a coal planer’s knives cutting load and its head vibration laws and search factors affecting their variations, dynamic characteristics of a 1:1 scale coal planer model were tested on a test platform simulating actual operating conditions to obtain load distribution laws of the planer head’s 3 knives including upper wide knife, central short one, and lower long one and the planer head vibration characteristics. Test showed that the upper wide knife has the largest cutting load, the lower long one has the second, and the central short one has the smallest; recurrence rates of amplitudes of planing force, lateral one and compressive one of 3 knives present Rayleigh distribution; the planer head’s vibration acceleration in x direction fluctuates within a range of ±200 m/s2, that in z direction fluctuates within a range of ±100 m/s2, and its rotating angular acceleration in xz plane fluctuates within a range of ±100 rad/s2; the variation trend of vibration curves has a certain level of similarity to that of knives’ load curves; peak frequencies of power spectral curves of knives’ loads are integer multiples of vibration frequencies along line of the planer head; peak frequencies of the power spectral curve of the planer head vibration include vibration frequencies along line of the planer head and peak frequencies of knives’ loads; straightness along the middle groove of a scraper conveyor is the main factor affecting planer knives’ load fluctuation and planer head vibration.
陈洪月1,2,3，魏玉峰1，毛君1,2，刘辉1. 刨煤机刨刀截割载荷与刨头振动特性实验分析研究[J]. 振动与冲击, 2020, 39(19): 149-155.
CHEN Hongyue1,2,3, WEI Yufeng1, MAO Jun1,2, LIU Hui1. Tests for a coal planer knives’ cutting loads and its head’s vibration characteristics. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(19): 149-155.
[1] 宋秋爽. 薄煤层刨煤机成套装备关键技术研究[J]. 中国工程科学，2011, 13(11):33-39.
SONG Qiu-shuang. Research on key technology of thin seam plough complete equipment [J]. Engineering Sciences, 2011, 13(11):33-39.
[2] 宋秋爽,袁 智,宋振铎,等. 综采成套装备试验平台关键技术研究[J]. 煤炭科学技术，2017, 45(8):194-199.
SONG Qiu-shuang, YUAN Zhi, SONG Zhen-duo,et al. Study on test platform key technology of complete fully-mechanized mining equipment [J]. Coal Science and Technology, 2017, 45(8): 194-199.
[3] 党亚歌，邵彩虹，孙 鹭，等. 薄煤层刨煤机工作面自动化开采系统应用研究[J]. 矿山机械，2014, 42(1):17-20.
DANG Ya-ge, SHAO Cai-hong, SUN Lu,et al. Research on application of automatic mining system on working face of plough in thin coal seams [J]. Mining and Processing Equipment, 2014, 42(1): 17-20.
[4] Myszkowski M. High performance remote-controlled plow systems [J]. Coal Age, 2017, 122(4): 34-39.
[5] LIU Guo-bing, CHEN Sheng-li. Analysis and research of factors affecting coal mining with plough [J]. Journal of China University of Mining & Technology, 2002, 12(2): 77-80.
[6] Hudecek V, Chovanec J,Urban P,et al. Experience in the mining of coal seams using plough systems in the Czech Republic [J]. Journal of Mines, Metals & Fuels. 2013, 61(4): 77-81.
[7] 赵丽娟,何景强,李发泉. 刨煤机刨刀破煤过程的数值模拟[J]. 煤炭学报，2012, 37(5):878-883.
ZHAO Li-juan, HE Jing-qiang, LI Fa-quan. Numerical simulation of coal breaking process of plow bit [J]. Journal of China Coal Society, 2012, 37(5): 878-883.
[8] 赵丽娟,陈 磊,田 震. 刨煤机不同位置刨刀的载荷模拟研究及其强度验证[J]. 机械强度，2017, 39(1):79-84.
ZHAO Li-juan, CHEN Lei, TIAN Zhen. Simulation study and strength validation of planes load at different position of coal plough [J]. Journal of Mechanical Strength, 2017, 39(1): 79-84.
[9] 刘芮葭, Chu Viet Dung, Nguyen Viet Tuyen. 基于刨煤机单刨刀截割试验的截割阻力模型研究[J]. 煤炭科学技术，2016, 44(6):216-221.
Liu Rui-jia, Chu Viet Dung, Nguyen Viet Tuyen. Study on cutting resistance model of single plow cutter test based on coal plough [J]. Coal Science and Technology, 2016, 44(6): 216-221．
[10] 李晓豁,黄志龙,杜 伟，等. 不同刨削深度MK型刨刀强度与疲劳寿命研究[J]. 煤炭学报，2012, 37(1):162-166.
LI Xiao-huo, HUANG Zhi-long, DU Wei,et al. Study on strength and fatigue life of MK type plow bit under different planing depths [J]. Journal of China Coal Society, 2012, 37(1): 162-166.
[11] Q. Zhang,M. J. Xu,N. Hu. Study on fatigue life of plow bit under different planning parameters [J]. Strength of Materials, 2014, 46(2): 262-269.
[12] 康晓敏,李贵轩. 单自由度刨煤机动力学模型的建立与仿真研究[J]. 振动与冲击，2009, 28(2):191-195.
KANG Xiao-min, LI Gui-xuan. Single degree of freedom dynamic model of coal pough and its simulation [J]. Journal of Vibration and Shock, 2009, 28(2): 191-195.
[13] 李晓豁,刘 霞,焦 丽，等. 不同工况下滑行式刨煤机的动态仿真研究[J]. 煤炭学报，2010, 35(7):1202-1206.
LI Xiao-huo, LIU Xia, JIAO Li,et al. Dynamic simulation of sliding coal plow under different working conditions [J]. Journal of China Coal Society, 2010, 35(7): 1202-1206.
[14] 康晓敏,李贵轩. 多自由度刨煤机动力学模型的建立与仿真[J]. 振动与冲击，2010, 29(7):139-146.
KANG Xiao-min, LI Gui-xuan. Multi DOF dynamic model for a coal plough with its simulation [J]. Journal of Vibration and Shock, 2010, 29(7): 139-146.
[15] 陈洪月,张 瑜,宋秋爽，等. 含侧向间隙刨煤机刨头接触碰撞动态特性研究[J]. 机械设计，2016, 33(11):44-48.
CHEN Hong-yue, ZHANG Yu, SONG Qiu-shuang,et al. Dynamic characteristics study of contact-impact of plough plow body with lateral clearance [J]. Journal of Machine Design, 2016, 33(11): 44-48.
[16] 毛 君,张 瑜,刘占胜，等. 间隙条件下刨煤机刨头接触碰撞动态特性研究[J]. 振动与冲击，2015, 34(19):224-229.
MAO Jun, ZHANG Yu, LIU Zhan-sheng,et al. Dynamic characteristics of plough head under contact-impact with clearances [J]. Journal of Vibration and Shock, 2015, 34(19): 224-229.
[17] 张建军,郑 杨,崔正龙. 刨煤机刨削试验用模拟煤壁配比及结构层研究[J]. 煤矿机电，2016(1):16-18.
ZHANG Jian-jun, ZHENG Yang, CUI Zheng-long. Research on proportion and structure layer of simulation call wall used for plow planing test [J]. Colliery Mechanical and Electrical Technology, 2016(1): 16-18.
[18] 张 强,石抗抗,王海舰，等. 基于压电俘能装置的刨刀受力检测系统[J]. 煤炭科学技术，2017, 45(2):136-140.
ZHANG Qiang, SHI Kang-kang, WANG Hai-jian,et al. Stress detecting system of plough based in piezoelectric energy harvester [J]. Coal Science and Technology, 2017, 45(2): 136-140.
