Abstract:Water hammer is inevitable in pressurized pipeline water delivery projects. Gasbag-type pneumatic tanks are more reliable and economical than other water hammer protection measures in the high-lift water delivery projects with medium-and-small flow. Based on the actual project, the commercial software Bentley Hammer was applied to analyze the hydraulic transient process of the water delivery pipeline. The water hammer protection result was studied when the combination of the gasbag-type pneumatic tank, multi-function water pump control valve and air valve was used, and the impact of the volume and preset pressure of the tank on the result of water hammer protection was explored. Numerical simulation models for three cases were constructed through the Bentley Hammer software, where no protective measures were used, the combination of multi-function pump control valve and air valve was used, and the combination of multi-function pump control valve, air valve and gasbag-type pneumatic tank was adopted respectively. Hydraulic transient process analysis was performed when the three pumps stopped simultaneously. The research results showed that the installation of gasbag-type pneumatic tank in high-lift water delivery project with medium-and-small flow can achieve good water hammer protection result. For the overall water delivery pipeline system, the water hammer protection ability of the gasbag-type pneumatic tank increases with the increase of the volume and the preset pressure of the tank. Appropriate volume and preset pressure of the pneumatic tank can effectively control the maximum positive and negative pressure of water hammer in the pipeline and help to achieve the optimal social and economic benefits.
汪顺生,郭新源. 基于Bentley Hammer的气囊式空气罐的水锤防护研究[J]. 振动与冲击, 2022, 41(6): 177-182.
WANG Shunsheng,GUO Xinyuan. Water hammer protection effect of gasbag-type pneumatic tank based on the analysis using the Bentley Hammer software. JOURNAL OF VIBRATION AND SHOCK, 2022, 41(6): 177-182.
[1] 邱传忻. 泵站[M]. 北京:中国水利水电出版社,2004.
QU Chuanxin. Pumping Stations[M]. Beijing: China Water & Power Press, 2004.
[2] 巴鹏,邹长星,陈卫丹. 截止阀启闭时流动特征的动态数值模拟[J]. 振动与冲击,2010, 29(10): 157-161.
BA Peng, ZOU Changxing, CHEN Weidan. Dynamic numerical simulation of flow features when stop-valve opening or closing[J]. Journal of Vibration and Shock, 2010, 29(10): 157-161.
[3] 李炜. 水力计算手册(第二版)[M]. 北京:中国水利水电出版社,2006.
LI Wei. Manual of Hydraulic Calculation[M]. Beijing: China Water & Power Press, 2006.
[4] 张健,朱雪强,曲兴辉,等. 长距离供水工程空气阀设置理论分析[J]. 水利学报,2011, 42(09): 1025-1033.
ZHANG Jian, ZHU Xueqiang, QU Xinghui, et al. Arrangement of air-valve for water hammer protection in long-distance pipelines[J]. Journal of Hydraulic Engineering, 2011, 42(09): 1025-1033.
[5] CARMONA-PAREDES R B, POZOS-ESTRADA O, CARMONA-PAREDES L G, et al. Protecting a pumping pipeline system from low pressure transients by using air pockets: A case study[J]. Water, 2019, 11(9): 1786.
[6] 张毅鹏,刘梅清,刘志勇,等. 长距离输水管线事故停泵水锤防护方法分析[J]. 中国农村水利水电,2018(08): 198-203.
ZHANG Yipeng, LIU Meiqing, LIU Zhiyong, et al. An analysis of water hammer induced by pump stoppage in long-distance pipeline[J]. China Rural Water and Hydropower, 2018(08): 198-203.
[7] 齐敦哲,郝建志,吴福臣,等. 长管道工程中空气阀与单向调压塔水锤防护比较与优化[J]. 中国农村水利水电,2012(012): 134-136.
QI Dunzhe, HAO Jianzhi, WU Fuchen, et al. Comparison and optimization of water hammer protection between air valve and surge tank in long pipeline[J]. China Rural Water and Hydropower, 2012(012): 134-136.
[8] 蒋梦露,张健,罗浩,等. 气囊式空气罐水锤防护研究[J]. 南水北调与水利科技, 2015, 13(04): 713-716+725.
JIANG Menglu, ZHANG Jian, LUO Hao, et al. Research on water hammer protection of pneumatic tank[J]. South-to-North Water Transfers and Water Science & Technology, 2015, 13(04): 713-716+725.
[9] 陈云良,鞠小明,郑小玉,等. 火电厂补给水系统气囊式空气罐水锤防护特性研究[J]. 工程科学与技术, 2010, 42(03): 19-23.
CHEN Yunliang, JU Xiaoming, ZHENG Xiaoyu, et al. Research on Water hammer protection of pneumatic tank in make-up water system of thermal power station[J]. Advanced Engineering Sciences, 2010, 42(03): 19-23.
[10] 袁星明,周建勤,罗建群,等. 多功能水泵控制阀:CN 00224979 [P]. 2001-07-04.
YUAN Xingming, ZHOU Jianqin, LUO Jianqun, et al. Multifunctional pump-control valve[P]. CN 00224979.0, 2001-07-04.
[11] 蒋白懿,李博,刘培青,等. 多功能水泵控制阀对短距离高扬程输水管线水锤防护效果的模拟研究[J]. 水电能源科学, 2015, 33(03): 171-174.
JIANG Baiyi, LI Bo, LIU Peiqing, et al. Simulation of water hammer protection of multifunctional pump control valve in short distance high lift water pipeline[J]. Water Resources and Power, 2015, 33(03): 171-174.
[12] 赵卓,赵晓锋,万建信,等. 基于特征线法的长距离加压输水系统的水锤防护研究[J]. 给水排水, 2019, 55(S1): 277-280.
ZHAO Zhuo, ZHAO Xiaofeng, WAN Jianxin, et al. Water hammer protection of long pressurized water conveyance system based on method of characteristic[J]. Water & Wastewater Engineering, 2019, 55(S1): 277-280.
[13] ABDEL-GAWAD H A A, DJEBEDJIAN B. Modeling water hammer in viscoelastic pipes using the wave characteristic method[J]. Applied Mathematical Modelling, 2020, 83: 322-341.
[14] Afshar M H, Rohani M. Water hammer simulation by implicit method of characteristic[J]. International Journal of Pressure Vessels and Piping, 2008, 85(12): 851-859.
[15] Triki A. Multiple-grid finite element solution of the shallow water equations: Water hammer phenomenon[J]. Computers & Fluids, 2014, 90:65-71.
[16] Wylie E B, Streeter V L. Fluid Transients[M]. New York: Mcgraw-Hill International Book Company, 1978.
[17] 杨建东. 实用流体瞬变流[M]. 北京:科学出版社,2018.
YANG Jiandong. Practical Fluid Transients[M]. Beijing: Science Press, 2018.
[18] GB 50265-2010. 泵站设计规范[S]. 北京:中国计划出版社,2011.
GB 50265-2010. Design code for pumping station[S]. Beijing: China Planning Press, 2011.