考虑摩擦非线性应力的脐带缆疲劳寿命精确分析研究

摘要
图/表
参考文献(17)
相关文章 (15)

全文: PDF (979 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要针对深水动态钢管脐带缆在波浪荷载以及平台运动作用下引起的疲劳问题，考虑缆体自重导致的平均应力对关键构件钢管疲劳损伤影响，构建疲劳分析模型进行疲劳寿命预估。同时，依据螺旋缠绕结构特征考虑构件间相互接触摩擦非线性效应给出了脐带缆基本力学行为的应力求解方法。以我国南海某1500m水深的动态脐带缆为例进行分析，结果表明：只考虑无滑动时的局部应力得到的疲劳寿命过分偏于保守，而只采用全滑动时的局部应力得到的疲劳寿命则偏大很多。在疲劳寿命预估模型中考虑非线性局部应力作为输入可以得到更为准确的寿命估计。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	卢青针1
	杨志勋2
	陈金龙3
	熊飞宇2
	阎军2
	岳前进1
	2

关键词 ：脐带缆, 古德曼修正, 疲劳寿命, 接触摩擦, 非线性应力

Abstract：The fatigue problem of dynamic umbilicals induced by wave load and floater movement in deepwater was studied.The prediction method of the fatigue life was established by considering the influence of mean stress due to self-weight on fatigue damage of key component steel tube.Solution of non-linear local stress was presented under basic mechanical behaviors of helical wound structure with consideration of contact and friction between components of the umbilical.A case study of a dynamic umbilical for 1 500 meters depth in South China Sea was presented.The results show that the more accurate result of the fatigue life was calculated through Goodman correction and non-linear local stress.The fatigue life by considering local stress with no-slip assumption was conservative.An obviously longer fatigue life was obtained by considering local stress with full-slip assumption.

Key words： Umbilical cable Goodman correction Fatigue life Contact and friction Non-linear stress

收稿日期: 2017-01-05 出版日期: 2018-12-15

引用本文:

卢青针1，杨志勋2，陈金龙3，熊飞宇2，阎军2，岳前进1,2. 考虑摩擦非线性应力的脐带缆疲劳寿命精确分析研究[J]. 振动与冲击, 2018, 37(24): 189-194.
LU Qingzhen1,YANG Zhixun2,CHEN Jinlong3,XIONG Feiyu2,YAN Jun2,YUE Qianjin1,2. A study on fatigue life prediction of umbilicals with consideration of friction non-linear stress. JOURNAL OF VIBRATION AND SHOCK, 2018, 37(24): 189-194.

链接本文:

http://jvs.sjtu.edu.cn/CN/ 或 http://jvs.sjtu.edu.cn/CN/Y2018/V37/I24/189

[1] Hoffman J, Dupont W, Reynolds B. A fatigue-life prediction model for metallic tube umbilicals [C]. Proceeding of Offshore Technology Conference, Houston:2001.
[2] de Sousa J R M, de Sousa F J M, de Siqueira M Q, et al. A theoretical approach to predict the fatigue life of flexible pipes [J]. Journal of Applied Mathematics, 2012, (2012): 1-29.
[3] 宋磊建,付世晓,陈希恰,等.深海脐带缆总体响应特性比较研究[J]. 振动与冲击, 2014, 33(1): 119-124.
SONG L J, FU S X, CHEN X Q, et al. Comparative study on deepwater umbilical overall response characteristics[J]. JOURNAL OF VIBRATION AND SHOCK, 2014, 33(1):119-124.
[4] 宋磊建, 韩芸, 付世晓,等. 深水缓波形脐带缆结构响应及参数敏感性分析[J]. 振动与冲击, 2015(19):109-114.
SONG L J, HAN Y, FU S X, et al. Structural responses and parameter sensitivity analysis of a Lazy-Wave deepwater umbilical[J]. JOURNAL OF VIBRATION AND SHOCK, 2015(19):109-114.
[5] 李清泉, 杨和振. 深海缓坡型脐带缆干涉分析研究[J]. 振动与冲击, 2012, 31(15):180-184.
LI Q Q, YANG H Z. Interference analysis for deepwater lazy-wave umbilical. 2012, 31(15):180-184.
[6] Skeie G, Sodahl N, Steinkjer O, Efficient fatigue analysis of helix elements in umbilicals and flexible risers: Theory and applications[J]. Journal of Applied Mathematics, 2012, (2012): 1-22.
[7] Knapp R H. Structural analysis of composite umbilical cables [C]. International Society of Offshore and Polar Engineers, Lisbon, 2007: 3487-3491.
[8] Sævik S. Theoretical and experimental studies of stresses in flexible pipes [J]. Computers & Structures, 2011, 89(23): 2273-2291.
[9] Sævik S. Comparision between theoretical and experiment flexible pipe bending stresses [C]. International Conference on Ocean, Offshore Mechanics and Artic Engineering, Shanghai，June, 2010. 6-11.
[10] Wang H H, Ekeberg K I. Internal friction effects on fatigue life of steel tube umbilical[C]. The 24th International Ocean and Polar Engineering Conference. Busan, June, 2014. 15-20.
[11] Parsinejad F, Kassner C, Kurtz M, et al. Friction, contact pressure, and nonlinear behavior of steel tubes in subsea umbilicals[J]. Journal of energy resources technology, 2015, 137(3): 032906-032913.
[12] Probye I, Dobsom A, Michael Martinez. Advances in 3D FEA techniques for metallic tube umbilicals [C]. International Society of Offshore and Polar Engineers, Lisbon, 2007: 848-854.
[13] Le Corre V, Probyn I. Validation of a 3-Dimensionalfinite element analysis model of deep water steel tube umbilical in combined tension and cyclic bending[C]. The 28th International Conference on Ocean, Offshore and Arctic Engineering. Hawaii, May 31 to June 11, 2009: 77-86.
[14] 李清泉,杨和振.深海脐带缆内套管间相互作用的研究[J]. 中国海洋平台, 2011 (6): 28-32.
LI Q Q, YANG H Z, Static Analysis of the Tubes Interaction in Deep-sea Umbilicals[J], China Offshore Platform, 2011 (6): 28-32.
[15] API RP 2A.Recommended practice for planning, design, and constructing fixed offshore structures[S]. American Petroleum Institute, 1991.
[16] DNV. Rules for the design, construction, and inspection of fixed offshore structures[S]. Det Norske Veritas, 2014.
[17] ISO 13628-5. Petroleum and natural gas industries-Design and operation of subsea production systems-Part 5: Subsea Umbilicals[S]. International Standards Organization