激光干涉测量中光学窗口受动态压力的影响分析

PDF(2029 KB)

振动与冲击 ›› 2020, Vol. 39 ›› Issue (9) : 126-131.

论文

李博1,2，杨军2，汤霞清1，黄楠1,3, 石玉松2

作者信息 +

Influence of dynamic pressure on the optical window in laser interferometry

LI Bo1,2 ,YANG Jun2,TANG Xiaqing1,HUANG Nan1,3 ,SHI Yusong2

Author information +

文章历史 +

摘要

利用激光干涉仪对动态压力进行非接触测量时，压力腔中常设计光学窗口，目的是在动态压力环境与激光干涉仪间建立光学通道，利用激光干涉法使动态压力能溯源到时间、长度与静态压力上。由于在动态压力环境下光学窗口受到内外压差、温度梯度、振动等因素影响，将直接影响光学测量精度。针对上述问题，通过仿真分析方法，分析在动态压力环境下压力、温度、振动与光学窗口的影响关系，同时通过光学窗口在动态压力环境下试验，研究各影响分量对真实测量结果的影响，可为后续动态压力的校准和测量进行修正和补偿以及其他类似动态压力环境下的光学窗口设计提供依据。

Abstract

The optical window is often designed in the pressure chamber when a laser interferometer does the non-contact measurement of dynamic pressure in order to establish optical channels between dynamic pressure and laser interferometer.However, under dynamic pressure environment, optical windows are affected by the internal and external pressure difference, temperature variation, vibration and other factors, which will directly affect the accuracy of optical measurement.To solve the above problem, through simulation analysis, the relationship between the optical window and the pressure, temperature, vibration under dynamic pressure environment was analyzed.At the same time, the optical window was tested under dynamic pressure environment to study the influence of each influential component on the real measurement results, which can modify and compensate for the accuracy of calibration and measurement of dynamic pressure.It also provides a basis for the optical window design under other similar dynamic measurements.

导出引用

李博1,2，杨军2，汤霞清1，黄楠1,3, 石玉松2. 激光干涉测量中光学窗口受动态压力的影响分析[J]. 振动与冲击, 2020, 39(9): 126-131

LI Bo1,2,YANG Jun2,TANG Xiaqing1,HUANG Nan1,3,SHI Yusong2. Influence of dynamic pressure on the optical window in laser interferometry[J]. Journal of Vibration and Shock, 2020, 39(9): 126-131

参考文献

[1]. Yang J , Fan S , Li C , et al. Liquid sinusoidal pressure measurement by laser interferometry based on the refractive index of water[J]. Applied Optics, 2016, 55(34):9695. [2]. 李士贤, 李林. 光学设计手册.第2版[M]. 北京理工大学出版社, 1996. [3]. Bayar M. Optomechanical systems design[M]. Marcel Dekker, Inc, 1986. [4]. Li Ming. Optimization of Optical Window Glass Thickness Based on the Thermal Optical Analysis[J]. Acta Optica Sinica, 2010, 30(1):210-213. [5]. Jr B W. Some effects of aerospace thermal environments on high-acuity optical systems.[J]. Applied Optics, 1966, 5(5):701. [6]. Shi J, Wu. Thermal-Optical Analysis for Optical Window of High-Altitude and High-Speed Aerial Camera[J]. Acta Optica Sinica, 2012, 32(4):0422004. [7]. Jr B W. Some effects of aerospace thermal environments on high-acuity optical systems[J]. Applied Optics, 1966, 5(5):701. [8]. Lin K Q, Lu Y H, Luo Z F, et al. Numerical and experimental investigation of temperature effects on the surface plasmon resonance sensor[J]. Chinese Optics Letters, 2009, 7(5):428-431. [9]. 傅志方, 华宏星. 模态分析理论与应用[M]. 上海交通大学出版社, 2000. [10]. 曹树谦. 振动结构模态分析:理论、实验与应用[M]. 天津大学出版社, 2001. [11]. 谢龙汉, 刘新让, 刘文超. ANSYS结构及动力学分析[M]. 电子工业出版社, 2012.