1.Laboratory of Optics, Terahertz and Non-Destructive Testing, School of Mechanical Engineering and Automation, Fuzhou University, Fuzhou 350108, China;
2.School of Mechatronics Engineering and Automation, Shanghai University, Shanghai 200072, China;
3.School of Physics and Information Engineering, Fuzhou University, Fuzhou 350108, China
A two-dimensional frequency-domain optical vibration tomography system (2D-FOCVT) was used for the modal analysis of added-mass cantilever beams and finally to do mass detection.Based on describing the theory and method for the natural frequencies of lumped mass cantilever beams, the first three order natural frequencies of a cantilever beam with different added mass were analyzed, and the sensitivity of the additional lumped mass to the first three order natural frequencies was investigated.Subsequently, the relationship between the additional lumped mass and the first three order natural frequencies measured by the home-made 2D-FOCVT system was achieved by using the numerical fitting method.The variation of the sensitivity along with the change of the additional lumped mass was discussed.On this basis, a mass weighing method using the sensitivity of the first order natural frequency was proposed by virtue of the 2D-FOCVT system.The experimental results show that the home-made 2D-FOCVT system exhibits a good performance with nano-scale high resolution; also, it is a novel application of 2D-FOCVT in the modal analysis for mass weighing.
方波1，钟舜聪1,2，林杰文1，陈伟强1，钟剑锋1，张秋坤1,3. 基于二维频域光学振动相干层析的悬臂梁模态频率质量称量方法[J]. 振动与冲击, 2020, 39(6): 74-81.
FANG Bo1，ZHONG Shuncong1,2，LIN Jiewen1，CHEN Weiqiang1，ZHONG Jianfeng1，ZHANG Qiukun1,3. Mass weighing method based on the modal frequencies of cantilever beams using two-dimensional frequency-domain vibration coherence tomography. JOURNAL OF VIBRATION AND SHOCK, 2020, 39(6): 74-81.
[1] Jianfeng Zhong, Shuncong Zhong, Qiukun Zhang. Two-dimensional optical coherence vibration tomography for low-frequency vibration measurement and response-only modal analysis [J]. Mechanical Systems and Signal Processing,2016,79.
[2] Jianfeng Zhong, Shuncong Zhong, Qiukun Zhang. Two-dimensional optical coherence tomography for real-time structural dynamical characterization [J]. Opt. Laser Eng, 2015,66:74–79.
[3] 谢 明，丁 康.频谱分析的校正方法[J]. 振动工程学报，1994，7(2)：172-179.
XIE Ming, DING Kang. Rectifying Technique of Spectrum Analysis[J]. JOURNAL OF VIBRATION ENGINEERING, 1994, 7(2): 172-179.
[4] Shuncong Zhong, Qiukun Zhang. Enhanced optical coherence vibration tomography for subnanoscale-displacement-resolution calibration of piezoelectric actuators [J]. Sensors & Actuators: A. Physical,2015,233.
[5] 熊诗波，黄长艺. 机械工程测试技术基础[M].3版. 北京：机械工业出版社. 2013:193-202.
XIONG Shi-bo, HUANG Chang-yi. Mechanical Engineering Test Technology[M]. Beijing: China Machine Press. 2013:193-202.
[6] Lopes. H, Ferreira. H, Araújo dos Santos. J. V, et al. Localization of damage with speckle shearography and higherorders patial derivatives[J]. Mechanical Systems and Signal Processing,2014,49(1-2).
[7] Hsu. C, Sung. Y, Lin. Z, et al. Prototype of a compact displacement sensor with a holographic diffraction grating[J]. Optics and Laser Technology,2013,48:200–5.
[8] Verrier. N, Atlan. M. Absolute measurement of small-amplitude vibrations by time-averaged heterodyne holography with a dual local oscillator[J]. Opt. Lett, 2013,38(5):739–741.
[9] Dai X, Wang M, Zhao Y, Zhou J. Self-mixing interference in fiber ring laser and its application for vibration measurement[J]. Opt. Express, 2009,17(19):16543–8.
[10] Dauksevicius R, Bubulis RA, Jurenas V, et al. Investigation of dynamics of cantilever-typemicrostructure by laser Doppler vibrometry[J].Ultragarsas, 2004,3:29–32.
[11] Kageyama K, Kimpara I, Suzuki T, et al. Smart marine structures: an approach to them onitoring of ship structures with fiber-optic sensors[J]. Smart Mater Struct, 1998,7:472–478.
[12] Johansmann M, Siegmund G, Pineda M. Targeting the limits of laser Doppler vibrometry[J]. In: Proceedings of the IDEMA 2005, Tokyo, Japan; 2005,pp:1–12.
[13] Jianfeng Zhong,Shuncong Zhong,Qiukun Zhang,Yizhou Zhuang,Huancai Lu,Xinbin Fu. Vision-based measurement system for structural vibration monitoring using non-projection quasi-interferogram fringe density enhanced by spectrum correction method[J]. Measurement Science and Technology,2017,28(1).
[14] Zhong S, Shen H, ShenYC. Real-time monitoring of structural vibration using spectral-domain optical coherence tomography[J]. Opt. Laser Eng, 2011,49:49-127.
[15] Salawu O S.Detection of structural damage through changes in frequencies: a review [J],Engineering Structures.1997,19(9):718-723.
[16] 姜 宇，姚建铨，王瑞康，等. 光学相干层析系统的建立与研究[J]. 光学仪器，2003，25(2)：33-37.
JIANG Yu ,YAO Jian-quan ,WANG Rui-kang,et al. Establishment and research of optical coherence tomography[J]. Optical Instruments, 2003, 25(2): 33-37.
[17] Ding K, Xie M, Zhang X. Phase difference correction method for phase and frequency in spectral analysis[J]. Mech Syst Signal Process, 1996,14(5):835.
[18] Xie Ming, Ding Kang. CORRECTIONS FOR FREQUENCY, AMPLITUDE AND PHASE IN A FAST FOURIER TRANSFORM OF A HARMONIC SIGNAL[J]. Mechanical Systems and Signal Processing, 1996,10(2).
[19] 夏 季，朱目成，马德毅. 带集中质量和弹性支承梁的横向固有振动分析[J]. 力学与实践， 2000(05):27-30.
XIA Ji, ZHU Mu-cheng, MA De-yi. ANALYSIS OF LATERAL NATURAL VIBRATION OF BEAMS WITH LUMPED MASSES AND ELASIC SUPPORTS[J]. MECHANICS AND ENGINEERING, 2000(05):27-30.
[20] 葛明锋，元洪兴，王雨曦，等. 高分辨力成像光谱仪光谱定标研究[J]. 光电工程， 2015，42(12)：12-19.
GE Ming-feng, QI Hong-xing，WANG Yu-xi,et al. Spectral Calibration for the High Spectral Resolution Imager[J]. Opto-Electronic Engineering, 2015,42(12):12-19.
