[1] 何卫东. 机器人用高精度RV传动的研究[D]. 哈尔滨:哈尔滨工业大学, 1999.
HE Wei-dong. Study on high precision RV drive used in robots[D]. Harbin: Harbin Institute of Technology, 1999.
[2] 张大卫, 王刚, 黄田, 等. RV减速机动力学建模与结构参数分析[J]. 机械工程学报, 2001, 37(1):69-74.
ZHANG Da-wei, WANG Gang, HUANG Tian, et al. Dynamic formulation of RV reducer and analysis of structural parameters[J]. Journal of Mechanical Engineering. 2001, 37(1):69-74.
[3] Zhongyi R, Shimin M, Wenchao G, et al. Tooth modification and dynamic performance of the cycloidal drive[J]. Mechanical Systems and Signal Processing, 2017, 85:857-866.
[4] 何卫东, 吴鑫辉. 机器人用RV减速器模态分析与试验[J]. 机械设计, 2016(11):76-80.
HE Wei-dong, WU Xin-hui. Modal analysis and test of RV reducer used in robot[J]. Journal of Machine Design, 2016(11): 76-80.
[5] Chuan C, Yuhu Y. Structural characteristics of rotate vector reducer free vibration[J]. Shock and Vibration, 2017, https:/doi.org/10.1155/2017/ 4214370.
[6] Ying Y H, Chen C, Wang S Y. Response sensitivity to design parameters of RV reducer[J]. Chinese Journal of Mechanical Engineering, 2018, 31(3).
[7] 郑钰馨,奚鹰,卜王辉, 等. RV减速器5自由度纯扭转模型非线性特性分析[J].浙江大学学报(工学版), 2018,52(11):2098-2109.
ZHENG Yu-xin, XI Ying, BU Wang-hui, et al. Nonlinear characteristic analysis of 5-degree-of-freedom pure torsional modal of RV reducer[J]. Journal of Zhejiang University (Engineering Science), 2018,52(11):2098-2109.
[8] Chen Z, Ou Y, Long S, et al. Vibration characteristics analysis of the new pin-cycloid speed reducer[J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2018, 40(2):55.
[9] 洪嘉振, 刘铸永. 刚柔耦合动力学的建模方法[J]. 上海交通大学学报(自然版), 2008, 42(11): 1922-1926.
HONG Jia-zhen, LIU Zhu-yong. Modeling methods of rigid flexible coupling dynamics[J]. J. Shanghai Jiaotong Univ.(Sci.), 2008, 42(11):1922-1926.
[10] 孟聪. RV减速器动力学特性分析[D]. 天津:天津大学, 2017.
MENG Cong. Dynamic characteristic analysis of RV reducer[D]. Tianjin: Tianjin University, 2017.
[11] 孙永森. RV减速器动态特性研究[D]. 江苏:南京航空航天大学, 2018.
SUN Yong-sen. Research on Dynamic Characteristics of RV Reducer[D]. Jiangsu: Nanjing University of Aeronautics and Astronautics, 2018.
[12] 王家序, 黄超, 肖科, 等. 新型少齿差行星齿轮装置振动特性分析与试验研究[J]. 振动与冲击, 2013, 32(5):31-37.
WANG Jia-xu, HUANG Chao, XIAO Ke, et al. Vibration performance analysis and experimental research on a new type planetary transmission with small tooth number difference[J]. Journal of vibration and shock, 2013, 32(5):31-37.
[13] 石珍, 王家序, 肖科, 等. 少齿差行星减速器振动特性仿真与试验研究[J]. 振动与冲击, 2014, 33(20):133-139.
SHI Zheng, WANG Jia-xu, XIAO Ke, et al. Vibration characteristics simulation and experimental research on a planetary reducer with small tooth number difference[J]. Journal of vibration and shock, 2014, 33(20):133-139.
[14] Xu J L, Yan T, Peng, et al. Effects of the transmission shaft on the main reducer vibration based on ADAMS and experimental demonstration[J]. Australian Journal of Mechanical Engineering, 2015, 15(1):2-10.
[15] Yang W, Tang XL. Modelling and modal analysis of a hoist equipped with two-stage planetary gear transmission system[J]. Proceedings of The Institution of Mechanical Engineers Part K-Journal of Multi-body Dynamics, 2017, 231(4):739-749.
[16] CRAIG RR, BAMPTON MCC. Coupling of substructures for dynamic analysis[J]. AIAA Journal, 1968, 6(7):1313-1319. |