三类三维隔震抗倾覆支座力学性能试验研究
Experimental Study on Mechanical Properties of Three Kinds of Three-dimensional Base Isolation and Overturn Resistance Devices
摘 要:针对目前建筑三维隔震支座种类少以及不能抗倾覆的缺陷,开发了三类三维隔震抗倾覆支座(3D-BIORD)。基本思想是将水平隔震的子装置和竖向隔震的子装置串联起来,同时考虑了整套装置的抗倾覆要求。三类支座的区别在于采用不同的竖向隔震子装置,它们分别是环形弹簧支座、碟形弹簧支座和叠层厚橡胶支座。利用电液伺服压剪试验机对水平隔震子装置即抗拉橡胶支座(PRRB)进行压剪试验,利用电子式万能试验机对抗拉橡胶支座和竖向隔震子装置的竖向性能进行试验,结果表明水平隔震子装置在保证原有水平隔震支座性能的基础上,能达到预期的抗倾覆和限位要求,装置的竖向具有足够的承载力和适宜的刚度,弹簧类隔震子装置的性能基本不受加载频率的影响。
Abstract There is less kind of structural three-dimensional base isolator, and the existent bearings do not have the ability of overturn resistance. In view of this, three kinds of three-dimensional base isolation and overturn resistance devices (3D-BIORD) were developed. The basic idea is that horizontal isolation sub-devices and vertical isolation sub-devices of these bearings are connected in series in the vertical direction, considering the demand of overturn resistance of the whole device. The difference of three kinds of bearings is adopting different vertical isolation sub-devices, including ring spring bearing, disk spring bearing and thick rubber bearing. Press-shear tests of horizontal isolation sub-devices, also called pull resistance rubber bearings (PRRB), were carried out using electro-hydraulic servo press-shear machine. Vertical property tests of PRRBs and vertical isolation sub-devices were performed using electronic universal testing machine. Test results show that PRRBs have the anticipated capacities of overturn resistance and displacement restriction, and their primary properties aren’t changed. Vertical isolation sub-devices have enough bearing capacity and proper stiffness. Loading frequency has no influence on properties of spring bearings.
防灾减灾 / 三维隔震 / 抗倾覆 / 力学性能 / 滞回曲线 {{custom_keyword}} /
disaster prevention and reduction / three-dimensional base isolation / overturn resistance / mechanical property / hysteresis curve {{custom_keyword}} /
/
〈 | 〉 |