旋转机械非平稳振动信号的时频分析比较

向 玲;唐贵基;胡爱军

振动与冲击 ›› 2010, Vol. 29 ›› Issue (2) : 42-45.

PDF(1863 KB)
PDF(1863 KB)
振动与冲击 ›› 2010, Vol. 29 ›› Issue (2) : 42-45.
论文

旋转机械非平稳振动信号的时频分析比较

  • 向 玲;唐贵基;胡爱军
作者信息 +

THE COMPARISON OF VIBRATION SIGNAL’ TIME-FREQUENCY ANALYSIS FOR ROTATING MACHINERY

  • XIANG Ling;HU Aijun;TANG Guiji
Author information +
文章历史 +

摘要

信号分析与处理是机械故障监测与诊断中故障提取的常用方法,传统的振动故障分析方法难以满足频率随时间变化的非平稳信号的要求,联合时频分析是非平稳信号比较有力的分析工具。该文以转子实验台的典型振动故障信号为研究对象,分析研究了几种时频分析方法如STFT、Wigner-Ville分布、小波变换和Hilbert-Huang变换。对比结果表明:STFT和Wigner-Ville分布的时频分辨率是矛盾的,易出交叉项或使信号变得微弱;小波分解会出现多余信号;Hilbert-Huang变换的时频分析能够直观检测信号中的微弱奇异成分,清楚给出时频分布情况,为旋转机械状态监测和故障诊断提供了新的手段。

Abstract

It is important to extract fault features in fault diagnosis of machinery. The traditional signal analysis can not settle for non-stationary vibration signal whose statistic properties are variant. To deal with non-stationary signal, time-frequency analysis techniques are widely used. The experiment data of typical vibration fault signal ware analyzed by different methods, such as short time Fourier transform (STFT), Wigner-Ville distribution (WVD), Wavelet transform (WT) and Hilbert-Huang Transform (HHT). Compared with these methods, it is demonstrated that the time-frequency resolutions of STFT and WVD were inconsistent, which were easy to cross or make signal lower. WT had distinct time-frequency distribution, but it brought redundant component. HHT time-frequency analysis can detect components of low energy, and displayed true and distinct time-frequency distribution. Therefore,it is a very effective tool to diagnose the early faults of rotating machinery, and it provides new means for state detection and fault diagnosis.

关键词

Wigner-Ville分布 / Wavelet变换 / Hibert-Huang变换 / 非平稳信号 / 时频分析

Key words

Wigner-Ville distribution (WVD) / Wavelet transform (WT) / Hilbert-Huang transform (HHT) / Non-stationary signal / Time-frequency analysis

引用本文

导出引用
向 玲;唐贵基;胡爱军. 旋转机械非平稳振动信号的时频分析比较 [J]. 振动与冲击, 2010, 29(2): 42-45
XIANG Ling;HU Aijun;TANG Guiji. THE COMPARISON OF VIBRATION SIGNAL’ TIME-FREQUENCY ANALYSIS FOR ROTATING MACHINERY [J]. Journal of Vibration and Shock, 2010, 29(2): 42-45

PDF(1863 KB)

2786

Accesses

0

Citation

Detail

段落导航
相关文章

/