基于胎面-路面摩擦自激的轮胎非线性振动建模仿真

杨宪武;左曙光;雷镭;吴旭东

振动与冲击 ›› 2010, Vol. 29 ›› Issue (5) : 211-214.

PDF(1907 KB)
PDF(1907 KB)
振动与冲击 ›› 2010, Vol. 29 ›› Issue (5) : 211-214.
论文

基于胎面-路面摩擦自激的轮胎非线性振动建模仿真

  • 杨宪武;左曙光;雷镭;吴旭东
作者信息 +

MODELING AND SIMULATION OF NONLINEAR VIBRATION OF TIRE BASED ON THE FRICTION SELF-EXCITED

  • Yang Xian-Wu;Zuo Shu-guang;Leilei;Wu Xu-dong
Author information +
文章历史 +

摘要

轮胎的多边形磨损是汽车研发设计过程中迫切需要解决的问题之一。考虑轮胎接地磨擦的非线性特性,建立了悬架-轮胎-胎面系统的考虑时间延迟的两自由度动力学振动模型,研究基于自激振动理论的轮胎多边形磨损现象。通过matlab/simulink进行仿真试验,验证了汽车中高速行驶时硬自激振动现象的存在,并给出了能够引起自激振动的敏感参数及车速范围。所建立的动力学振动模型可以帮助分析悬架动力学特性对轮胎多边形磨损的影响,为减小或消除轮胎的自激振动提供了理论依据。

Abstract

Polygonal wear of tire is one of the most pressing problems to be solved in the process of a vehicle’s research and design. Considering the nonlinear characteristic of tire’s grounding friction, a two-degree-of-freedom dynamic vibration model of the suspension-tire-tread system, taking time-delay into account, is established to research the polygonal wear of tire based on self-excited vibration theory. The sensitive parameters and speed range which can motivate self-excited vibration are calculated,as well as the phenomenon of hard self-excited vibration are proved to be reasonable at high speed after simulating in matlab/simulink. The dynamic vibration model can analyze the impact of suspension’s dynamic characteristic on tire’s polygonal wear and provide a theoretic foundation to reduce or eliminate the tire’s self-excited vibration.

关键词

轮胎 / 多边形磨损 / 自激振动 / 非线性振动 / 极限环

Key words

tire / polygonal wear / self-excited vibration / nonlinear vibration / limit cycle

引用本文

导出引用
杨宪武;左曙光;雷镭;吴旭东. 基于胎面-路面摩擦自激的轮胎非线性振动建模仿真[J]. 振动与冲击, 2010, 29(5): 211-214
Yang Xian-Wu;Zuo Shu-guang;Leilei;Wu Xu-dong. MODELING AND SIMULATION OF NONLINEAR VIBRATION OF TIRE BASED ON THE FRICTION SELF-EXCITED [J]. Journal of Vibration and Shock, 2010, 29(5): 211-214

PDF(1907 KB)

2079

Accesses

0

Citation

Detail

段落导航
相关文章

/