摘要
针对于微硬盘驱动器斜坡加载/卸载(Load/Unload)过程,对微硬盘的磁头/盘界面及磁头悬臂与支承件接触面的摩擦学及动力学特性进行建模,对加载及卸载过程中的浮动块、悬臂的动态特性和斜坡与提升臂的接触特性进行了仿真,分析了加载与卸载速度及斜坡倾角对斜坡与提升臂的接触变形与接触力及接触面间的摩擦能耗特性的影响。研究结果表明,加载及卸载速度的增加将导致斜坡接触面上的接触力及摩擦力的增大,增大斜坡倾角将使接触面摩擦能量损耗增加。研究结果对微硬盘磁头/盘界面的改进和加载/卸载技术的进一步应用提供依据。
Abstract
The tribological and dynamic characteristics of the head/disk and suspension lift-tap/ramp interface during load/unload (L/UL) process for a miniature hard disk drive were modeled, and the dynamic performance of slider and suspension, as well as the contact at the lift-tab/ramp interface, were simulated. The effect of the loading and unloading velocity and the ramp angle on the contact deformation, contact force and the energy consumption during L/UL process were analyzed. The simulation results indicate that the increase of the loading or unloading velocity of the suspension causes the increase of the contact and friction forces at the interface, while the increase of the ramp angle dissipates more energy during L/UL processes. The research results will be beneficial to the improvement of the head/disk interface and the application of Load/Unload technology in hard disk drives.
关键词
加载/卸载(Load/Unload) /
硬盘驱动器 /
接触 /
建模 /
仿真
{{custom_keyword}} /
Key words
Load/Unload technology /
hard disk drive /
contact /
modeling /
simulation
{{custom_keyword}} /
魏浩东;敖宏瑞;姜洪源.
硬盘加载/卸载过程磁头悬臂接触面的动力学仿真[J]. 振动与冲击, 2010, 29(5): 78-81,1
WEI Hao-dong;AO Hong-rui;JIANG Hong-yuan.
Modeling and simulation of dynamic characteristics of suspension interface during the Load/Unload process for a hard disk drive [J]. Journal of Vibration and Shock, 2010, 29(5): 78-81,1
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}