基于比例风险模型的板级无铅焊点跌落寿命分析

PDF(1311 KB)

振动与冲击 ›› 2011, Vol. 30 ›› Issue (3) : 124-128.

论文

基于比例风险模型的板级无铅焊点跌落寿命分析

王文;孟光;刘芳;尤明懿

作者信息 +

Lifetime Analysis of Lead-Free Solder Joints Under Drop Impact Using Proportional Hazards Model

Wang Wen;Meng Guang;Liu Fang;You Mingyi

Author information +

文章历史 +

摘要

文中进行了三组跌落高度下的焊点疲劳寿命试验，采用比例风险模型(PHM)分析跌落高度对焊点寿命分布的影响。PHM模型估计得到的焊点寿命期望(MTTF)及寿命失效概率密度与实验数据都能够较好的吻合，验证了模型的有效性。且由焊点跌落MTTF值随高度变化曲线可看出，当跌落高度略大于0.6m时焊点MTTF值都小于10次，表明无铅焊点对冲击载荷非常敏感。最后用估计得到的寿命期望结合Miner准则得到板极无铅焊点跌落寿命损伤累积模型。

Abstract

Three groups of drop impact tests of solder joints have been conducted with different drop height. Proportional hazards model (PHM) is used to evaluate the effect of drop height on the solder joints’ life span. The mean-time-to failure (MTTF) and the failure probability density function (PDF) estimated from the PHM agree well with the experimental data, and this validates the effectiveness of the PHM. By the curve of the MTTF (with respect to different drop heights), it can be observed that the MTTF<10 when the drop height is greater than 0.6m, and this demonstrates that the lead-free solder joints are very sensitive to drop impact. Finally, the estimated lifetime of MTTF is integrated with the Miner’s law for cumulative damage model of lead-free solder joints.

导出引用

王文;孟光;刘芳;尤明懿. 基于比例风险模型的板级无铅焊点跌落寿命分析[J]. 振动与冲击, 2011, 30(3): 124-128

Wang Wen;Meng Guang;Liu Fang;You Mingyi. Lifetime Analysis of Lead-Free Solder Joints Under Drop Impact Using Proportional Hazards Model[J]. Journal of Vibration and Shock, 2011, 30(3): 124-128