水平激振模式下压实系统动力学过程及响应特性研究

郑书河;林述温

振动与冲击 ›› 2014, Vol. 33 ›› Issue (2) : 147-151.

PDF(1460 KB)
PDF(1460 KB)
振动与冲击 ›› 2014, Vol. 33 ›› Issue (2) : 147-151.
论文

水平激振模式下压实系统动力学过程及响应特性研究

  • 郑书河1,2,林述温1
作者信息 +

The dynamic process of horizontal excitation compaction system and its response characteristics

  • ZHENG Shu-he1,2,LIN Shu-wen1
Author information +
文章历史 +

摘要

针对智能振动压路机水平激振特点,根据压实进程中土壤参数变化,按工况分阶段建立二自由度动力学模型,研究纯滚动、滑转、纯打滑三种工况下振动轮与土壤相互作用的动力学过程。以XG6133D型智能振动压路机为例,仿真分析压实系统时频响应特性。结果表明,随压实进程振动轮水平运动发生由单周期至倍周期变化,其时域波形波峰、波谷产生锯齿状、平顶状畸变,频谱呈现除基波外仅含丰富奇次倍谐波。时频响应特性研究可为预测压实状况及提高压实性能提供理论依据。

Abstract

Based on the horizontal excitation character of the intelligent vibratory roller and the soil parameters, three compaction conditions such as pure rolling, slip-roll and pure slip were classified during the compaction process. According to the working condition in stages the interacted dynamic process between the drum and soil was analyzed. Taking the XG6133D intelligent roller as an example, the response characteristics were investigated by means of numerical simulation. During the compaction process, the motion of vibratory drum occurred from single periodic motion to periodic doubling motion, the peaks and valleys of its time response were induced to be distorted, and spectrums present in addition to the fundamental wave only rich odd harmonics. In theory the conclusion of the article is valuable to forecast the compaction status and improve the compaction quality.



关键词

智能振动压路机 / 水平激振 / 打滑 / 响应特性

Key words

intelligent vibratory roller / horizontal excitation / slipping / response characteristics

引用本文

导出引用
郑书河;林述温. 水平激振模式下压实系统动力学过程及响应特性研究[J]. 振动与冲击, 2014, 33(2): 147-151
ZHENG Shu-he;LIN Shu-wen. The dynamic process of horizontal excitation compaction system and its response characteristics[J]. Journal of Vibration and Shock, 2014, 33(2): 147-151

PDF(1460 KB)

664

Accesses

0

Citation

Detail

段落导航
相关文章

/