某机载电子设备机架隔振缓冲系统设计

PDF(1577 KB)

振动与冲击 ›› 2015, Vol. 34 ›› Issue (11) : 183-187.

论文

某机载电子设备机架隔振缓冲系统设计

朱兰琴杨文芳李雨

作者信息 +

Design of Vibration and Shock Isolation System for an Airborne Electronic Rack

ZHU Lanqin，YANG Wenfang，LI Yu

Author information +

文章历史 +

摘要

为提高机载电子设备的机械环境适应能力，对某机载电子设备机架的隔振缓冲系统设计进行研究。从隔振缓冲系统的基础理论出发，结合机架的实际要求目标进行仿真分析，提出一套将理论计算、仿真分析和试验验证等先进技术相结合的隔振缓冲系统设计方法和流程。经用某机架的试验验证，表明方法和流程合理，达到了设计目标，并节省了设计的时间和成本。可为类似机架在其它动态环境中应用时的设计作参考。

Abstract

In order to improve the mechanical environment adaptability of an airborne electronic equipment, the vibration and shock isolation system of an airborne electronic rack were studied. Base on basic theory of vibration and shock isolation, an advanced vibration and shock isolation system design method and flow was proposed, which combined theory, analysis, and test. The method and flow was verified by test to be reasonable，the target of design were achieved, time and cost of design were save. References were provided for congeneric rackes to apply in else dynamic environment.

导出引用

朱兰琴杨文芳李雨. 某机载电子设备机架隔振缓冲系统设计[J]. 振动与冲击, 2015, 34(11): 183-187

ZHU Lanqin，YANG Wenfang，LI Yu . Design of Vibration and Shock Isolation System for an Airborne Electronic Rack[J]. Journal of Vibration and Shock, 2015, 34(11): 183-187

参考文献

[1]王茂.机载机柜的隔振设计[J].电讯技术，2007，47（2）：194-197.
WANG Mao. Vibration isolation design for electronic cabinet[J]. Telecommunication Engineering. 2007, 47（2）: 194-197.
[2]沈文军.舰用铸铝密闭机柜的隔振缓冲设计[J].电子机械工程，2005，21（6）：8-14.
SHEN Wen-jun. Vibration isolation & shock buffering design of ship-born airtight cabinet[J]. Electro-Mechanical Engineering, 2005，21（6）：8-14.
[3]李玉峰，秦志刚.某机载电子设备的抗振设计[J].电子机械工程，2007，23（3）：3-6，13.
LI Yu-feng, QIN Zhi-gang. Design of anti-vibration for airborne electronic equipment[J]. Electro-Mechanical Engineering, 2007，23（3）：3-6，13.
[4]杨文芳,魏强，朱兰琴, 基于有限元分析的机载电子
设备减振设计[J].振动与冲击，2010, 29（5）：230-234
YANG Wen-fang, WEI Qiang, ZHU Lan-qin. Anti-vibration design for an airborne electronic equipment based on finite element method[J]. Journal of Vibration and Shock, 2010, 29（5）：230-234
[5]王平，张国玉，高玉军等.金属橡胶减振器在机载光电吊舱复合减振系统中的应用[J].振动与冲击.2014,33（5）:193-199
WANG Ping, ZHANG Guo-yu, GAO Yu-jun. etal. Application of metal-rubber dampers in vibration reduction system of an airborne electro-optical pod[J]. Journal of Vibration and Shock, 2014, 33（5）：193-199
[6]庄表中等.结构随机振动.国防工业出版社. 1995
ZHUANG Biao-zhong, etc. Structure Random Vibration. Publishing House of Defense Industry. 1995
[7]刘树林等译.冲击与振动手册（第5版）.中国石化出版社.2008
LIU Shu-lin, etc. Shock and Vibration Handbook（Fifth Editon）. The McGraw-Hill Companies, Inc. 2008
[8]平丽浩等.雷达结构与工艺.电子工业出版社.2007
PING Li-hao, etc. Radar Structure and Technics. Publishing House of Electronics Industry. 2007
[9]邱成悌等.电子设备结构设计原理.东南大学出版社.2005
QIU Cheng-ti, etc. Structure Design Principle of Electronic Equipment. Publishing House of Southeast University. 2005
[10]颜肖龙等.无谐振隔振原理的理论分析与应用研究.电子机械工程.1997
YAN Xiao-long, etc. Theoretcial analysis and application study on resonance-free isolation principle. Electro-Mechanical Engineering, 1997（1）：48-55