基于动态轧制力的四辊冷轧机七自由度振动特性研究

PDF(1696 KB)

振动与冲击 ›› 2015, Vol. 34 ›› Issue (22) : 98-102.

论文

刘浩然1 张莹2 时培明3 赵红旭3

作者信息 +

Research on Vibration Characteristic of Seven Degree of Freedom of Cold Rolling Mill Based on the Dynamic Rolling Force

LIU Hao-ran1 ZHANG Ying2 SHI Pei-ming3 ZHAO Hong-xu3

Author information +

文章历史 +

摘要

针对四辊冷轧机机座辊系系统，考虑轧辊振动位移对轧制力的影响，建立了基于动态轧制力的非线性七自由度振动模型；运用平均法求解此七自由度非线性模型，得到此系统的幅频特性方程，进一步运用奇异性理论得到了系统的分岔行为；通过现场实际数据分析了各个参数对幅频特性的影响以及对系统分岔和混沌特性的影响。这为四辊冷轧机的动力学研究和抑制振动的发生提供了理论参考。

Abstract

Considering the influence of roll vibration of rolling force, the seven degree of freedom vibration nonlinear model is established based on the dynamic rolling force for stand rolls system of four-roll cold mill. The amplitude-frequency characteristic equation of the multiple degrees of freedom nonlinear model is obtained by using average method, further, the bifurcation behavior of the system is given by singularity theory. The influence of various parameters on the amplitude-frequency characteristic, the bifurcation and chaos characteristics of the system are studied through analyzing the practical data. The above mentioned results have provided a theoretical reference for studying on kinematics and inhibiting the occurrence of vibration for four-roll cold tandem mill.

导出引用

刘浩然1 张莹2 时培明3 赵红旭3. 基于动态轧制力的四辊冷轧机七自由度振动特性研究[J]. 振动与冲击, 2015, 34(22): 98-102

LIU Hao-ran1 ZHANG Ying2 SHI Pei-ming3 ZHAO Hong-xu3 . Research on Vibration Characteristic of Seven Degree of Freedom of Cold Rolling Mill Based on the Dynamic Rolling Force[J]. Journal of Vibration and Shock, 2015, 34(22): 98-102

参考文献

[1] 瞿志豪，王康健，魏立群，张杏耀．冷连轧机颤振的一种振因研究[J]．机械设计与研究，2006，22(1)：89-92.
QU Zhai-hao, WANG Kang-jian, WEI Li-qun, ZHANG Xin-yao. A Study of the Chatter Cause on the Cold Tandem Rolling Mill[J]. Machine Design and Research, 2006, 22(1): 89-92.
[2] 闫晓强. 连轧机振动控制重要进展综述[J]. 冶金设备, 2013(2): 55-57.
YAN Xiao-qiang. Important Progress on Tandem Rolling Mill Vibration Control[J]. Metallurgical Equipment, 2013(2): 55-57.
[3] Younes M A, Shahtout M, Damir M N. A parameters design approach to improve product quality and equipment performance in hot rolling[J]. Journal of Materials Processing Technology, 2006, 171(1): 83-92.
[4] 马维金，李凤兰，王俊元，熊诗波．四辊轧机的六自由度垂直振动模型研究[J]．中国机械工程，2011，22(24)：2962-2965.
MA Wei-jin, LI Feng-lan, WANG Jun-yuan, XIONG Shi-bo. Modelling and Validation of Vertical Vibration with 6 Degrees of Freedom for 4-high Hot Strip Mill Stand[J]. China Mechanical Engineering, 2011, 22(24): 2962-2965.
[5] 杨旭，李江昀，童朝南. 冷轧机垂向辊系非线性振动建模与稳定性分析[J]．振动、测试与诊断，2013，33(2): 303-307.
YANG Xu, LI Jiang-yun, TONG Chao-nan. Nonlinear Vibration Modeling and Stability Analysis of Vertical Roller System in Cold Rolling Mill[J]. Journal of Vibration, Measurement & Diagnosis, 2013, 33(2): 303-307.
[6] 侯东晓，陈浩，刘斌，时培明，张玉存.轧机辊系垂直非线性参激振动特性分析[J]．振动与冲击，2009，28(11)：1-6.
HOU Dong-xiao, CHEN Hao, LIU Bin SHI Pei-ming, ZHANG Yu-cun. Analysis on param etrically excited nonlinear vertical vibration of roller system in rolling mills[J]. Journal of Vibration and Shock, 2009, 28(11): 1-6.
[7] 侯东晓，朱月，刘浩然，刘飞，彭荣荣. 基于动态轧制力的冷轧机非线性振动特性研究[J]．机械工程学报，2013，49(14)：45-50.
HOU Dongxiao, ZHU Yue, LIU Haoran, LIU Fei, PENG Rongrong. Research on Nonlinear Vibration Characteristics of Cold Rolling Mill Based on Dynamic Rolling Force[J]. Journal of Mechanical Engineering, 2013, 49(14): 45-50.