通过模态滤波实现阵列式传感器系统的故障诊断

朱峤;毛崎波

振动与冲击 ›› 2015, Vol. 34 ›› Issue (3) : 51-54.

PDF(1589 KB)
PDF(1589 KB)
振动与冲击 ›› 2015, Vol. 34 ›› Issue (3) : 51-54.
论文

通过模态滤波实现阵列式传感器系统的故障诊断

  • 朱峤,毛崎波
作者信息 +

Fault detection of sensor array using modal filtering method

  • ZHU Qiao, MAO Qi-bo
Author information +
文章历史 +

摘要

基于结构振动响应特性利用改进的模态滤波方法对阵列式传感器系统进行故障诊断。在梁结构表面均匀布置一组加速度计,利用模态振型对该系统的输出信号进行重构,将重构信号与实际信号之间的曲率误差作为敏感参数,对系统中的模拟故障传感器进行检测与识别,并加以实验验证。数值计算和实验结果表明:改进的模态滤波方法不仅可以直接有效地对传感器系统进行实时故障监测,而且该方法与外界激励力位置无关,具有良好的工程应用前景。

Abstract

By using modal filtering method, a modified sensor fault detection approach based on structural dynamic characteristics is presented. An array of accelerometers attached on the surface of the beam are taken as sensors. The differences between the reconstructed signals by modal filtering and the measurement signals are obtained, then the curvature of the errors are taken as sensitive index to detect and identify the simulated fault sensor of sensor array. The numerical simulation and experimental result show that the proposed method can detect the fault sensor efficiently. Furthermore, this method is independent of the location of the excitation and it can be used for real-time monitoring system.


关键词

模态滤波 曲率误差 阵列式传感器 故障诊断

Key words

modal filtering / error of curvature / sensor array / fault detection

引用本文

导出引用
朱峤;毛崎波. 通过模态滤波实现阵列式传感器系统的故障诊断[J]. 振动与冲击, 2015, 34(3): 51-54
ZHU Qiao;MAO Qi-bo. Fault detection of sensor array using modal filtering method[J]. Journal of Vibration and Shock, 2015, 34(3): 51-54

PDF(1589 KB)

795

Accesses

0

Citation

Detail

段落导航
相关文章

/