针对变速器加速过程下轴承故障特征易于暴露难以提取问题，提出一种Teager能量算子增强倒阶次谱方法。计算加速过程等角度重采样信号的Teager能量算子，对Teager能量算子输出进行倒谱分析，获得Teager能量算子增强倒阶次谱。对加速过程滚动轴承外圈、内圈剥落故障信号进行分析，结果表明，Teager能量算子能有效增强冲击成分，抑制非冲击成分；倒阶次谱能从干扰中准确识别被增强的故障冲击特征，提取轴承微弱故障特征。
Abstract
The bearing’s fault feature is easier to be exposed and difficult to be extracted during speedup of a gearbox. In order to solve this problem, the enhancement of the order cepstrum based on Teager energy operator was presented. First, calculated the Teager energy operator of signal resampled by even angle-interval. Then the outcome of Teager energy operator was studied with the order cepstrum analysis, that was the order cepstrum enhanced by Teager energy operator. The signals of exfoliation fault at outside and inside ring of rolling bearing during speedup were analyzed. The results show that Teager energy operator can effectively enhance impulse components and restrain non-impulse components. Order cepstrum can identify impulse fault feature from the interference accurately and extract the weak fault feature of the bearing.
关键词
Teager能量算子 /
倒阶次谱 /
滚动轴承 /
故障诊断
{{custom_keyword}} /
Key words
Teager energy operator /
order cepstrum /
rolling bearing /
fault diagnose
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1]毛永芳. 机械测试中多分量信号特征提取方法的研究[D]. 重庆：重庆大学，2008:82-100.
[2]李辉,郑海起,杨绍普. 齿轮箱起动过程故障诊断[J]. 振动、测试与诊断,2009,29(2):167-170.
LI Hui, ZHENG Hai-qi, YANG Shao-pu. Gear fault diagnosis using order tracking and teager energy operator during startup[J].Journal of Vibration, Measurement & Diagnosis, 2009,29(2):167-170.
[3] 鞠萍华,秦树人,赵玲. 基于LMD的能量算子解调方法及其在故障特征信号提取中的应用[J]．振动与冲击,2011, 30(2):1-4．
JU Ping-hua, QIN Shu-ren, ZHAO Ling. Energy operator demodulating approach based on LMD and its application in extracting characteristics of a fault signal[J]. Journal of Vibration and Shock, 2011,30(2):1-4.
[4] 程军圣,杨怡,杨宇. 基于LMD的能量算子解调机械故障诊断方法[J]．振动、测试与诊断，2012，32(6)：915-919．
CHENG Jun-sheng, YANG Yi, YANG Yu. Mechanical fault diagnosis of energy operator demodulating approach based on LMD[J]. Journal of Vibration,Measurement &Diagnosis, 2012,32(6):915-919．
[5] 樊新海,何嘉武,王战军,等. 基于Teager能量算子的解调方法[J]． 装甲兵工程学院学报,2009,23(4)：61-63．
FAN Xin-hai, HE Jia-wu, WANG Zhan-jun, et al. Demodulation approach based on teager energy operator [J].Journal of Academy Armored Force Engineering, 2009，23(4)：61-63．
[6] Cheng J， Yu D， Yang Y．The application of energy operator demodulation approach based on EMD in machinery fault diagnose[J]．Mechanical Systems and Signal Processing,2007,21(2)：668-677．
[7] Bassiuny A M， Li X．Flute breakage detection during end
milling using Hilbert-Huang transform and smoothed nonlinear energy operator[J]．International Journal of Machine Tools and Manufacture，2007，47(6)：1011-1020．
[8]王天金,冯志鹏,郝如江,等. 基于Teager能量算子的滚动轴承故障诊断研究[J]. 振动与冲击，2012,31(2):1-5.
WANG Tian-jin, FENG Zhipeng, HAO Ru-jiang, et al. Fault diagnosis of rolling element bearings based on Teager energy operator[J]. Journal of Vibration and Shock, 2012, 31(2):1-5.
[9] 康海英,祁彦洁,王虹,等．利用倒阶次谱和经验模态分解的轴承故障诊断[J]．振动、测试与诊断,2009，29(1)：60-65．
KANG Hai-ying, QI Yan-jie, WANG Hong, et al. Fault diagnosis of rolling bearing based on order cepstrum analysis and empirical mode decomposition[J]. Journal of Vibration,Measurement &Diagnosis, 2009,29(1)：60-65．
[10] Potamianos A，Maragos P．A comparison of the energy operator and Hilbert transformapproaches for signal and speech demodulation[J].Signal Processing,1994,37(1):95- 120．
[11] 肖云魁．汽车故障诊断学[M]．北京：北京理工大学出版社,2006:252-253．
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(2176 KB)
