单激励纵扭复合超声铣削系统研究

PDF(1830 KB)

振动与冲击 ›› 2015, Vol. 34 ›› Issue (6) : 57-61.

论文

单激励纵扭复合超声铣削系统研究

针对切削、焊接过程中超声复合振动能获得较高加工质量、效率及有助于延长刀具使用寿命，研究分析纵扭复合超声铣削系统运动特性及切削轨迹特征；基于斜梁振动原理，提出加工工艺简单、制造成本低的斜梁式超声变幅杆，并利用有限元软件ANSYS进行结构动力学分析, 证实通过单向激励可产生纵扭复合振动；应用研制的纵扭复合超声振动铣削系统对碳纤维复合材料进行切削试验，获得较好加工效果，从而验证理论分析与数值模拟结果的正确性。

作者信息 +

Study on a new type of single actuator driven longitudinal-torsional composite ultrasonic milling system

Ultrasonic composite vibration not only helps to improve machining quality and efficiency in the cutting and welding process, but also helps to extend the service life of the cutter. Therefore, the motion characteristics and cutting trajectory features of longitudinal-torsional composite ultrasonic milling system were analyzed. Then, based on the vibration theory of oblique beam, the ultrasonic horn with oblique beams which have simple processing technology and low manufacturing cost was proposed. Meanwhile, the fact that the single longitudinal excitement could generate longitudinal-torsional composite vibration was proved through finite element analysis of structural dynamic characteristics of the ultrasonic horn. Finally, the longitudinal-torsional composite ultrasonic milling system was carried out on the carbon-fiber composites. The results showed that longitudinal-torsional composite ultrasonic vibration could improve the milling effect, and proved that the theoretical analysis and numerical simulation were correct.

Author information +

文章历史 +

摘要

针对切削、焊接过程中超声复合振动能获得较高加工质量、效率及有助于延长刀具使用寿命，研究分析纵扭复合超声铣削系统运动特性及切削轨迹特征；基于斜梁振动原理，提出加工工艺简单、制造成本低的斜梁式超声变幅杆，并利用有限元软件ANSYS进行结构动力学分析, 证实通过单向激励可产生纵扭复合振动；应用研制的纵扭复合超声振动铣削系统对碳纤维复合材料进行切削试验，获得较好加工效果，从而验证理论分析与数值模拟结果的正确性。

Abstract

Ultrasonic composite vibration not only helps to improve machining quality and efficiency in the cutting and welding process, but also helps to extend the service life of the cutter. Therefore, the motion characteristics and cutting trajectory features of longitudinal-torsional composite ultrasonic milling system were analyzed. Then, based on the vibration theory of oblique beam, the ultrasonic horn with oblique beams which have simple processing technology and low manufacturing cost was proposed. Meanwhile, the fact that the single longitudinal excitement could generate longitudinal-torsional composite vibration was proved through finite element analysis of structural dynamic characteristics of the ultrasonic horn. Finally, the longitudinal-torsional composite ultrasonic milling system was carried out on the carbon-fiber composites. The results showed that longitudinal-torsional composite ultrasonic vibration could improve the milling effect, and proved that the theoretical analysis and numerical simulation were correct.

导出引用

唐军1，2 赵波1. 单激励纵扭复合超声铣削系统研究[J]. 振动与冲击, 2015, 34(6): 57-61

TANG Jun1，2 ZHAO Bo1. Study on a new type of single actuator driven longitudinal-torsional composite ultrasonic milling system[J]. Journal of Vibration and Shock, 2015, 34(6): 57-61

参考文献

[1] 马俊金.C/C复合材料超声铣削机理研究[D]. 焦作: 河南理工大学,2012.
[2] Ferreira J R, Coppini N L, Levy Neto F. Characteristics of carbon-carbon composite turning[J]. Journal of Material Processing Technology,2001,109(1/2):65-71．
[3] Shamoto E, Moriwaki T. Elliptical vibration cutting[J]. Annuals of CIPR, 1994, 43(1):35-38.
[4] 上海交通大学. 超声波椭圆振动镗削加工方法[P]. 中国: 200510025063.3,2005-09-28.
[5] 马春翔,胡德金.超声波椭圆振动切削技术[J].机械工程学报, 2003,39(12):67-70.
MA Chun-xiang, HU De-jin. Ultrasonic elliptical vibration cutting[J]. Chinese Journal of Mechanical Engineering, 2003, 39(12): 67-70.
[6] 马春翔,王艳,社本英二,等. 超声波振动金刚石刀具对脆性材料临界切削深度的影响[J].机械工程学报,2005,41(6):198- 202.
MA Chun-xiang, WANG Yan, Shamoto E, et al. Influence of ultrasonic vibrated diamond tool on the critical depth of cut of brittle materials [J]. Chinese Journal of Mechanical Engineering, 2005, 41(6): 198-202.
[7] 马春翔, 社本英二, 森肋俊道. 超声波椭圆振动切削提高加工系统稳定性的研究[J]. 兵工学报, 2004,25(6):752-756.
MA Chun-xiang, Shamoto E, Moriwaki T. A study on the imprpvement of machining system stability by applying ultrasonic elliptical vibration cutting[J]. Acta Armamentarii, 2004, 25(6): 752-756.
[8] Ma Chun-xiang. Study of machining accuracy in ultrasonic elliptical vibration cutting[J].International Journal of Machine Tools & Manufacturer,2004(44):1305-1310.
[9] 童景琳,赵波,吴雁, 等.二维超声振动磨削陶瓷的表面质量试验研究[J].振动与冲击, 2007,26(10):176-179.
TONG Jing-lin, ZHAO Bo, WU Yan, et al. Study on surface roughness of nanocomposite ceramics with 2-dimensional ultrasonic vibration grinding [J]. Journal of Vibration and Shock, 2007,26(10):177-179.
[10] 薛进学,赵波,吴雁.二维超声磨削纳米复相陶瓷表面残余应力研究[J]. 兵工学报, 2010, 31(5): 636-640.
XUE Jin-xue, ZHAO Bo, WU Yan. Research on surface residual stress of nano-composite ceramics after two- dimensional ultrasonic grinding [J]. Acta Armamentarii, 2010, 31(5): 636-640.
[11] Wu Y, Fan Y, Kato M. et al. Development of an ultrasonic elliptic-vibration shoe center-less grinding technique[J]. Journal of Material Processing Technology, 2004, 155/156：1780-1787.
[12] 杨卫平,吴勇波,徐家文.超声椭圆振动-化学机械复合抛光工具及实验研究[J].机械科学与技术,2008,27(7):841-847.
YANG Wei-ping, WU Yong-bo, XU Jia-wen. A hybrid technique of ultrasonic-elliptic-vibration-assisted chemical- mechanical polishing and its experimental investigation [J]. Mechanical Science and Technology for Aerospace Engineering, 2008, 27(7): 841-847.
[13] 孙合明, 张龙, 赵淳生. 纵-扭复合型压电超声电机的优化设计[J]. 振动、测试与诊断, 2000, 20(3):166-170.
SUN He-ming, ZHANG Long, ZHAO Chun-sheng. Optimum design of ultrasonic motor based on longitudinal and torsional vibrator combination type[J]. Journal of Vibration, Measurement & Diagnosis, 2000, 20(3):166-170.
[14] 李华,张德远.新型单激励椭圆超声振动切削系统的研究[J].中国机械工程, 2005,16(22):1983-1986.
LI Hua, ZHANG De-yuan. Study on new elliptic ultrasonic vibration system excited by single longitudinal vibration[J]. China Mechanical Engineering, 2005,16(22):1983-1986.
[15] 李华,张德远，季远.双弯曲型单激励超声椭圆振动系统研究[J].压电与声光, 2006,28(4):414-416.
LI Hua, ZHANG De-yuan, JI Yuan. Study on the double bending model based elliptic ultrasonic vibration system under single excitement [J]. Piezoelectrics & Acoustooptics, 2006, 28(4): 414-416.
[16] 肖华,李勋,张德远. 天然金刚石刀具单激励超声椭圆振动车削[J]. 航空制造技术, 2007, 9: 81-84.
XIAO hua, LI Xun, ZHANG De-yuan. Single driven ultrasonic elliptical vibration turning with natural diamond tools [J]. Aeronautical Manufacturing Technology, 2007, 9: 81-84.
[17] Tsujino J,Sano T, Ogata H, et al. Complex vibration ultrasonic welding systems with large area welding tips [J]. Ultrasonics, 2002, 40:361-364.
[18] 皮钧,徐西鹏. 纵扭共振超声铣削研究[J].中国机械工程, 2009,20 (10):1163-1168.
PI Jun, XU Xi-peng. Research on longitudinal-torsional resonance ultrasonic milling(LTRUM)[J]. China Mechanical Engineering, 2009,20 (10):1163-1168.
[19] Zhou Guang-ping. The performance and design of ultrasonic vibration system for flexural mode[J]. Ultrasonics, 2000, 38(10): 979-984.
[20] 林仲茂.超声变幅杆的原理及设计[M].北京:科学出版社,1987.
[21] Jin Jia-mei,Zhang Jian-hui, Zhao Chun-sheng. Elliptic motions on modal conversion ultrasonic motors[J]. Transactions of Nanjing University of Aeronautics & Astronautics, 2008, 25(4): 262-265.
[22] 张朝晖. ANSYS12.0结构分析工程应用实例解析[M].北京:机械工业出版社, 2010: 159-214.