航空发动机风扇机匣包容性等效试验与分析方法

PDF(1526 KB)

振动与冲击 ›› 2016, Vol. 35 ›› Issue (2) : 162-167.

论文

柴象海1,2，张晓云3，侯亮1,2，杨宵毅1

作者信息 +

The equivalent test and simulation verification for fan containment case of aero engine

CHAI Xiang-hai1,2，ZHANG Xiao-yun3，HOU Liang1,2，YANG Xiao-yi1

Author information +

文章历史 +

摘要

针对硬壁机匣包容性问题，提出在发动机研制初期，通过风扇包容机匣等效试验件靶板冲击试验，模拟真实风扇叶片脱落机匣包容性过程，并通过材料高应变率试验拟合机匣材料在高应变率下的本构模型；建立基于简化试验结果的数值仿真模型标定及机匣包容性分析模型修正方法，对风扇叶片脱落机匣包容性分析模型进行标定，建立高精度风扇机匣包容性仿真预测模型，用于风扇叶片脱落适航取证试验前仿真预测，以提高试验成功率、减少试验次数。通过数值仿真可拟合获得机匣包容厚度与叶片脱落载荷的关系，为风扇包容机匣设计提供厚度参数输入参考。

Abstract

The containment for fan bladeout is the key of airworthiness certificationto commercial turbofan aero engine. The airworthiness certification authorities have developed a very strict technical requirements and validation criteria. However, as a destructive test, the fan blade out test is very expensive. In this paper, for hard-wall casing, it puts forward the target plate impact test, which simulates real fan bladeoutprocess.By high strain rate test of case material, the material model that includes the high strain rate effect is obtained.Then by the analysis for the test parameters, the high-precision simulation models can be established to evaluate the containment capability of the fan case. The high-precision simulation modelscan simulate the fan blade out test to increase the success rate. Moreover, based the simulation models,the relationship between thickness of the fan case and the load of fan blade out can be obtained.

导出引用

柴象海1,2，张晓云3，侯亮1,2，杨宵毅1. 航空发动机风扇机匣包容性等效试验与分析方法[J]. 振动与冲击, 2016, 35(2): 162-167

CHAI Xiang-hai1,2，ZHANG Xiao-yun3，HOU Liang1,2，YANG Xiao-yi1. The equivalent test and simulation verification for fan containment case of aero engine[J]. Journal of Vibration and Shock, 2016, 35(2): 162-167

参考文献

[1] Sarkar S, Atluri S N. Effects of multiple blade interaction on the containment of blade fragments during a rotor failure[J]. Finite Element in Analysis and Design, 1996, 23(2/3/4)：211-223.
[2] 于亚彬,陈伟.模型机匣叶片的包容性数值分析[J].航空动力学报,2005,20(3)：429-433.
YU Ya-bin, CHEN Wei. Numerical analysis of the modeled blade/casing containment[J]. Journal of Aerospace Power, 2005, 20(3)：429-433.
[3] 张伯熹,宣海军,吴荣仁.航空发动机涡轮叶片包容模拟试验研究[J]. 机械工程师,2006,5(10)：114-116.
ZHANG Bo-xi, XUAN Hai-jun, WU Rong-ren. Research on aero-engine turbine blade containment experiment [J]. Mechanical Engineer, 2006, 5(10)：114-116.
[4] 亓文果,金先龙,张晓云. 冲击-接触问题有限元仿真的并行计算[J]. 振动与冲击,2006,25(6)：68-72.
QI Wen-guo, JIN Xian-long, ZHANG Xiao-yun. Study on parallel algorithm for finite element simulation of contact- impact problems[J]. Journal of Vibration and Shock, 2006, 25(6)：68-72.
[5] 范志强,高德平,姜涛,等.模型机匣的包容性试验和数值模拟[J].南京航空航天大学学报,2006, 38(5)：551-556.
FAN Zhi-qiang, GAO De-ping, JIANG Tao, et al. Experimental study and numerical simulation of model casing containment [J]. Journal of Nanjing University of Aeronauties & Astronautiecs, 2006, 38(5)：551-556.
[6] Carney K S, Pereira J M, Revilock D M, et al. Jet engine fan blade containment using an alternate geometry[J]. International Journal of Impact Engineering,2009, 36(5)：720-728.