为进一步改善车辆的乘坐舒适性，将惯容器元件应用到车辆被动悬架系统，构建ISD悬架，利用网络综合方法确定ISD悬架结构。以车身加速度均方根值为优化目标，求解出ISD悬架的正实阻抗传递函数，然后用惯容器、弹簧、阻尼元件将之物理实现出来，建立1/4车辆悬架模型。采用多目标优化方法对ISD悬架参数进行优化，在此基础上，分析随机和脉冲激励下ISD悬架系统的综合性能。结果表明，与传统悬架相比，ISD悬架系统具有良好的动态性能，车身加速度均方根值减小了26.83%，1~3 Hz范围内有效抑制了车身垂直振动,改善了车辆在低频段的乘坐舒适性。
Abstract
In order to improve the ride comfort of vehicle, the inerter was used to vehicle suspension system to build “inerter-spring-damper” (ISD) suspension, the structure of ISD suspension was determined by using network synthesis method. The impedance transfer function of ISD suspension was obtained with the root-mean-square (RMS) of vehicle body acceleration as the ride comfort index. And it could be physically realized by using passive elements such as inerter, spring and damper. A quarter car vehicle model was built. By using the multi-objective optimization method, structural parameters of ISD suspension were optimized. On this basis, the performance of the suspension system was verified under random and pulse input. The results showed that in contrast to conventional suspension, the proposed suspension has a better dynamic performance. The RMS of body vertical acceleration is reduced about 26.83%，ISD suspension can suppress vertical vibration of vehicle body with frequency of 1~3 Hz and improve the ride comfort of vehicle.
关键词
悬架 /
惯容器 /
网络综合 /
多目标优化 /
乘坐舒适性
{{custom_keyword}} /
Key words
suspension /
inerter /
network synthesis /
multi-objective optimization /
ride comfort
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] Smith M C. Synthesis of mechanical networks: The inerter[J]. IEEE Transactions on Automatic Control, 2002, 47(10): 1648－1662.
[2] Smith M C．Performance benefits in passive vehicle suspensions employing inerters[J]．Vehicle System Dynamics, 2004, 42(4): 235－257．
[3] 陈龙，杨晓峰，汪若尘，等．改进的ISD 三元件车辆被动悬架性能的研究[J]．汽车工程，2014，36（3）：340－345.
Chen Long，Yang Xiaofeng，Wang Ruochen，et al. A study on the performances of vehicle passive suspension with modified inerter-spring-damper three-element structure[J]. Automotive Engineering, 2014,36（3）：340-345．(in Chinese with English abstract)
[4] Zhang Xinjie, Ahmadian M, Guo Konghui．On the benefits of semi-active suspensions with inerters[J]．Shock and Vibration, 2012, 19(3): 257－272．
[5] Evangelou S, Limebeer D J N, Sharp R S, et al. Control of motorcycle steering instabilities: Passive mechanical compensators incorporating inerters[J]. IEEE Control Systems Magazine, 2006, 26(5): 78－88.
[6] Cheng Weichen. The Applications of Inerter to Building Suspension[D]. Taipei: National Taiwan University, 2007.
[7] Wang Fucheng, Liao Minkai, Liao Bohuai, et al. The performance improvements of train suspension systemswith mechanical networks employing inerters[J]. Vehicle System Dynamics, 2009, 47(7)：805－830.
[8] Wang F C，Hsiang-An Chan．Mechatronic Suspension Design and Its Applications to Vehicle Suspension Control[J]．Proceedings of the 47th IEEE Conference on Decision and Control Cancun，Mexico，2008，12(9-11)：3769-3774．
[9] Scheibe, F，Smith M C．Analytical solutions for optimal ride comfort and tyre grip for passive vehicle suspensions[J]．Vehicle System Dynamics，2009，47(10)：1229-1252．
[10] Papageorgiou C, Smith M C. Positive real synthesis using matrix inequalities for mechanical networks: application to vehicle suspension[J]. IEEE Transactions on Control System Dynamics, 2006, 14(3): 423－435.
[11] 廖柏淮．被动式机械系统之网路实现¬—惯质与线性矩阵不等式在火车悬吊系统上之应用[D]．台北：国立台湾大学，2006．
Liao Baihuai. The Network Synthesis of Passive Mechanical System Employing Inerters - LMI Approaches and Applications to Train Suspension Systems[D]. Taipei: National Taiwan University, 2006.
[12] 俞立. 鲁棒控制—线性矩阵不等式处理方法[M]. 北京：清华大学出版社，2002.
Yu Li. Robust Control – Linear Matrix Inequality Approach[M]. Beijing: Tsinghua University Press, 2002.
[13] Shirahatt A, Prasad P S S, Panzade P, et al．Optimal design of passenger car suspension for ride and road holding [J]．Journal of the Brazilian Society of Mechanical Sciences and Engineering，2008，30(1): 66-76．
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(1101 KB)
