基于动力能力谱法的RC结构位移放大系数

PDF(3697 KB)

振动与冲击 ›› 2016, Vol. 35 ›› Issue (24) : 39-44.

论文

基于动力能力谱法的RC结构位移放大系数

陈伟宏1,2, 蒋认2, 崔双双3 , 吴波3

作者信息 +

Structural Displacement Amplification Factor of RC Frames Based on Dynamic Capacity Spectrum Method

Chen Weihong1,2, Jiang Ren2, Cui Shuangshuang3, Wu Bo3

Author information +

文章历史 +

摘要

结构位移放大系数是预测结构在某一地震设防水准作用下的最大弹塑性变形，从而指导结构设计的参数。我国现行抗震设计规范尚未引入结构位移放大系数。考虑6、7、8三个设防烈度，设计了3、5、8、10、12层共15个钢筋混凝土框架结构，建立其有限元模型，并采用结构振动台试验对有限元模型进行验证，进而对结构在地震作用下的反应进行分析。采用文中提出的动力能力谱方法，研究按我国抗震设计规范设计的RC框架结构在不同设防水准下的位移放大系数需求值，并与传统静力能力谱法得到的位移放大系数需求值进行对比分析。6、7、8度设防的RC框架结构的位移放大系数需求值在中震作用下分别为0.51~1.91、0.49~1.93、0.56~2.24；在大震作用下分别为1.28~4.82、1.40~4.89、1.37~5.56。中震作用下，按我国抗震设计规范设计的钢筋混凝土框架结构未发生整体屈服，表明我国抗震设计规范比较保守。

Abstract

Structural displacement amplification factor (DAF) is the key factor in seismic design, which is used to predict maximum inelastic deformations of structures under earthquake excitation. However, DAF hasn’t been introduced in the current Chinese seismic design code. In this paper, 15 RC frame buildings which are 3-, 5-, 8-, 10-, 12-story buildings in different seismic fortification intensity VI, VII, VIII are designed according to the Code for Seismic Design of Buildings GB 50011-2010. The FE models of these buildings are modeled and structural seismic response is analyzed. Shaking table test of a RC frame structure has been accomplished and the FE models are verified and validated. The “demand” values of the structural DAF of these RC frames are evaluated by dynamic capacity spectrum method, and the analysis results are compared with that analyzed by traditional static capacity spectrum method. For the designed RC frames in the seismic fortification intensity VI, VII, VIII zones, the ranges of demand values of structural DAF are 0.51~1.91、0.49~1.93、0.56~2.24 respectively when they are under fortification earthquakes．The ranges of demand values of structural DAF are 1.18~4.05、1.33~3.45、1.42~2.66 respectively when they are under rare earthquakes．The overall yield of the codified designed RC frames under fortification earthquakes has not occurred, and it is shown that Chinese seismic design code is conservative.

导出引用

陈伟宏1,2, 蒋认2, 崔双双3,吴波3. 基于动力能力谱法的RC结构位移放大系数[J]. 振动与冲击, 2016, 35(24): 39-44

Chen Weihong1,2, Jiang Ren2, Cui Shuangshuang3, Wu Bo3. Structural Displacement Amplification Factor of RC Frames Based on Dynamic Capacity Spectrum Method[J]. Journal of Vibration and Shock, 2016, 35(24): 39-44

参考文献

[1] Farahi M, Mofid M. On the quantification of seismic performance factors of chevron knee bracings, in steel structures [J]. Engineering Structures, 2013, 46: 155–164.
[2] Samimifar, M, Oskouei, AV, Rofooei, FR. Deflection amplification factor for estimating seismic lateral deformations of RC frames[J]. Earthquake Engineering and Engineering Vibration, 2015, 14(2): 373-384.
[3] Ahmad, Z, Shahzada, K, Gencturk, B, Naeem Khan, A , Rehan, R, Fahad, M, Ashraf, M, Ali, Z. Seismic Capacity Assessment of Unreinforced Concrete Block Masonry Buildings in Pakistan Before and After Retrofitting[J]. Journal of Earthquake Engineering, 2015, 19(3): 357-382.
[4] Kuylmaz, A, Topkaya, C. Displacement   amplification factors for steel eccentrically braced frames[J]. Earthquake Engineering & Structural Dynamics, 2015, 44(2):167-184.
[5] Wisnumurti, Dewi SM, Soehardjono A. Strength reduction factor ( R ) and displacement amplification factor (Cd) of confined masonry wall with local brick in Indonesia [J]. Procedia Engineering, 2014,95: 172-177.
[6] 童根树, 苏健. 联肢剪力墙的刚度、稳定性以及二阶效应[J]. 工程力学, 2012, 29(11): 115-122.
TONG Gen-shu, SU Jian. Rigidity & Buckling of Coupled Shear Walls and Second Order Effect [J]. Engineering Mechanics, 2012, 29(11): 115-122.
[7] 童根树, 蔡志恒, 张磊. 双周期标准化的位移放大系数谱[J]. 重庆大学学报(自然科学版), 2011, 34(10), 68-75.
TONG Gen-shu, CAI Zhi-heng, ZHANG Lei. Normalized inelastic deformation ratio spectra[J]. Journal of Chongqing University (Natural Science Edition),2011,34(10) , 68-75.
[8] 金双双, 郭兰慧, 戎芹, 张素梅. 方钢管混凝土框架-钢板剪力墙结构抗震分析[J]. 应用基础与工程科学学报, 2013, 21(6), 1145-1156.
     JIN Shuang-shuang, GUO Lan-hui, RONG Qin, ZHANG Su-mei. Analysis of Concrete Filled Square Steel Tubular Frame-Steel Plate Shear Wall Structural Systems [J]. Journal of Basic Science and Engineering, 2013, 21(6), 1145-1156.
[9] 李宇, 王森, 车艳阳, 武芳文. 梁式桥抗震设计的弹塑性位移反应谱[J]. 振动与冲击, 2015, 34(10): 1-5．
LI Yu, WANG Sen, CHE Yan-yang, WU Fang-wen. Elasto-plastic response spectra for beam bridge’s aseismic design [J]. Journal of Vibration and Shock，2015, 34(10): 1-5.
[10] 陈伟宏, 崔双双, 吕大刚, 李雁军．钢筋混凝土框架结构位移放大系数能力分析[J]. 土木工程学报, 2014, 47(8): 47-55.
     CHEN Wei-hong, CUI Shuang-shuang, LU Da-gang, LI Yan-jun. Capacity analysis for structural displacement amplification factor of reinforced concrete frames[J]. China Civil Engineering journal,2014,47(8): 47-55.
[11] 吕大刚, 崔双双, 陈志恒. 基于Pushover分析的钢筋混凝土框架结构抗侧向倒塌能力评定. 工程力学, 2013, 30(1), 180-189.
LU Da-gang, CUI Shuang-shuang, CHEN Zhi-heng. Assessment of Sidesway Collapse Resistant Capacity of Reinforced Concrete Frame Structures Based on Pushover Analysis [J].Engineering Mechanics, 2013, 30(1), 180-189.