为了满足结构试验试件尺寸越来越大、边界条件越来越复杂的需求，国内外多家高校和科研机构都开发了大型多功能试验加载系统。对试验系统的精确加载控制是保证试验顺利进行和取得准确试验结果的关键。本文首先介绍国内外现有的一些大型多功能试验加载系统，并针对哈尔滨工业大学结构与抗震试验中心的大型多功能试验加载系统压剪拟静力试验的竖向加载控制方法展开研究。提出应用力-位移混合控制方法实现竖向力加载控制，基于MTS控制系统给出具体实施方案，并通过试验对比传统力控制方法与基于力-位移混合控制方法的控制效果。研究结果表明：传统力控制方法虽然能很好实现稳定的竖向力，但是很难保证试件的压剪受力状态；而力-位移混合控制方法不但可以精确实现轴向力的加载控制，还能确保试件的压剪受力状态。基于力-位移的混合控制方法对于该类加载试验系统的竖向力加载控制具有通用性，在大比例尺柱、墙等试件的压剪试验中具有广阔的应用前景。
Abstract
In order to investigate the seismic performance of structures more precisely, a number of multi-functional structural testing systems were developed around the world in recent years. The testing systems are available for large-scaled or even full-scaled structural testing specimens and their flexible loading boundary conditions. The accurate control of the loading facilities is the key to guarantee the smooth moving of specimen and the accuracy of testing results. Firstly, the existing multi-functional structural testing systems were briefly introduced and the control problem witch is the most challenge of the testing systems is pointed out. Then, a failing quasi-static test was presented to prove the voice. By analyzing the reasons for failure, a force-displacement hybrid control method was proposed, which is a solution on simultaneous achievement of target vertical resultant force and synchronous displacement-controlled loading. The implementation procedure on the above mentioned control strategy was also illustrated. Finally, a successful quasi-static test were proceeded to verify the effectiveness of the mentioned hybrid control method. It is concluded that, by applying the hybrid control strategy, the expected control objectives can be well achieved. More accurate results of quasi-static tests on large-scaled column and wall specimens can be guaranteed.
关键词
关键词：多功能试验加载系统 /
力-位移混合控制 /
拟静力试验 /
压剪受力
{{custom_keyword}} /
Key words
multi-functional testing system /
force-displacement hybrid control /
quasi-static test /
combined compressive and shearing loading
{{custom_keyword}} /
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 陈再现,吴斌,王焕定,王凤来. 多自由度等效力控制拟动力子结构试验研究[J]. 工程力学,2011,28(8):138-141.
CHEN Zaixian, WU Bin, WANG Huanding, WANG Fenglai. Equivalent Force Control Substructure Pseudo-dynamic Experimental Study on a MDOF model [J]. ENGINEERING MECHANICS, 2011, 28(8):138-141. (in Chinese)
[2] 郭玉荣,范云蕾,曾东,肖岩. 网络化结构实验室：桥梁结构远程拟动力试验平台开发与应用[J]. 工程力学,2010, 27(S1):94-98.
GUO Yurong, FAN Yunlei, ZENG Dong, XIAO Yan. Networked Structural Laboratories: Development and Application of Remote Pseudo-dynamic Testing Plateforms for Bridge Structures [J]. ENGINEERING MECHANICS, 2010, 27(S1):94-98. (in Chinese)
[3] 许国山,郝伟,陈永盛,吴斌.基于有限元软件OpenSEES 的混合试验系统及试验验证[J]. 振动与冲击,2012,31(22):45-52.
XU Guoshan, HAO Wei, CHEN Yongsheng, WU Bin. A hybrid testing system based on finite element software OpenSEES [J]. JOURNAL OF VIBRATION AND SHOCK. 2014, 31(22): 45-52. (in Chinese)
[4] 陈永盛,吴斌,王贞,许国山,曾聪.基于Simulink的混合试验系统及其验证[J]. 振动与冲击,2014,33(7):18-23.
CHEN Yongsheng, WU Bin, WANG Zhen, XU Guoshan, ZENG Cong. Simulation and validation of a hybrid testing system with Simulink [J]. JOURNAL OF VIBRATION AND SHOCK. 2014, 33(7): 18-23. (in Chinese)
[5] 周惠蒙,吴斌. 采用滑动模态控制器的实时子结构试验等效力控制方法[J]. 振动与冲击,2012,31(7):27-33.
ZHOU Huimeng, WU Bin. Equivalent force control method with sliding mode controller for real-time substructure test [J]. JOURNAL OF VIBRATION AND SHOCK. 2012, 31(7): 27-33. (in Chinese)
[6] Catherine W F, Arturo E S. Multi-axial Subassemblage Testing (MAST) System: Description and Capabilities [J]. The 13th World Conference on Earthquake Engineering, 2004, Canada.
[7] Narutoshi N, Billie F S. Multi-Dimensional Hybrid Simulation Using a Six-Actuator Self-Reaction Loading System [J]. The 14th World Conference on Earthquake Engineering,, 2008, Beijing, China.
[8] 王倩颖. 实时子结构试验方法及其应用[D]. 哈尔滨：哈尔滨工业大学博士学位论文, 2007年7月.
WANG Qianying. Real-time Substructure Testing Method and its Application [D]. Harbin: Dissertation for the Doctoral Degree of Harbin Institute of Technolog, 2007.7. (in Chinese)
[9] 田石柱,赵桐,赵雪峰.位移保护下力-控制拟动力试验方法的原理[J]. 地震工程与工程振动,2002,22(3):37-41.
TIAN Shizhu, ZHAO Tong, ZHAO Xuefeng. Force- displacement compound control method for pseudo-dynamic test [J]. Earthquake Engineering and Engineering Vibration. 2002, 22(3): 37-41. (in Chinese)
[10] PAN Peng, Masayoshi Nakashima, Hiroshi Tomofuji. Online test using displacement-force mixed control[J]. Earthquake Engineering and Structural Dynamics, 2005,34: 869-888.
[11] 赵刚,潘鹏,聂建国,王宗纲. 基于力和位移混合控制的多自由度结构拟静力试验方法研究[J]. 土木工程学报,2012, 45(12):54-62.
ZHAO Gang, PAN Peng, NIE Jianguo, WANG Zonggang. Force-displacement mixed control method for quasi-static tests of structures with multiple degrees of freedom [J]. CHINA Civil Engineering Journal, 2012,45(12):54-62. (in Chinese)
[12] Narutoshi Nakata, B. F. Spencer, Jr. Amr S. Elnashai. Mixed Load/Displacement Control Strategy for Hybrid Simulation [A]. 4th International Conference on Earthquake Engineering, Paper No. 094. Taipei, China, 2006.
[13] 谭晓晶,吴斌. 外环位移控制与内环力控制拟动力试验方法[J]. 振动与冲击,2012,31(14):17-21.
TAN Xiaojing, WU Bin. Pseudo-dynamic testing with control technique combining displacement outer loop and force inner loop [J]. JOURNAL OF VIBRATION AND SHOCK. 2012, 31(14): 17-21. (in Chinese)
[14] 曾聪,吴斌,许国山,陈永盛. 结构多轴抗震试验加载系统开发及控制策略研究[J]. 振动与冲击,2014,33(2):1-6.
ZENG Cong, WU Bin, XU Guoshan, CHEN Yongsheng. Multi-axial dynamic structural testing system and its control strategies [J]. JOURNAL OF VIBRATION AND SHOCK. 2014,33(2):1-6. (in Chinese)
[15] http://hytest.hit.edu.cn
[16] 张树伟. 圆钢管再生混凝土柱压弯滞回性能研究[D]. 哈尔滨工业大学,2014.
ZHANG Shuwei. Static Behavior of Recycled Aggregate Concrete Filledcircular Steel Tubular Columns [D]. Harbin Institute of Technology, 2014. (in Chinese)
{{custom_fnGroup.title_cn}}
脚注
{{custom_fn.content}}
PDF(1806 KB)
