基于有限元模拟的人体胸部材料参数对其碰撞响应影响分析

王方 1,韩勇 1,李桂兵 2,杨济匡 3

振动与冲击 ›› 2016, Vol. 35 ›› Issue (8) : 90-96.

PDF(1935 KB)
PDF(1935 KB)
振动与冲击 ›› 2016, Vol. 35 ›› Issue (8) : 90-96.
论文

基于有限元模拟的人体胸部材料参数对其碰撞响应影响分析

  • 王方 1,韩勇 1,李桂兵 2,杨济匡 3
作者信息 +

Finite Element Analysis of the Effect of Material Properties on Human Thoracic Impact Response

  • Wang Fang 1, Han Yong 1, Li Gui-bing 2, Yang Ji-kuang 3
Author information +
文章历史 +

摘要

研究目的是分析正面冲击载荷条件下,胸腔骨骼结构和软组织结构材料参数的变化对胸部不同碰撞响应参数的影响。采用一个已经建立并验证的人体胸部有限元模型,基于胸腔骨骼和软组织的多个材料参数,进行正面冲击载荷下的胸部碰撞模拟,分别输出主要的胸部响应参数值,并采用标准多项式拟合方法详细对比分析了胸部材料参数发生变化时胸腔的不同响应。结果表明胸腔骨骼和软组织材料参数的变化对正面碰撞载荷下胸部碰撞响应的影响程度各不相同。其中,骨骼和软组织材料参数的变化对胸部碰撞力(Fmax)和胸部变形量(Dmax)的影响显著,肋骨骨折数(NRF)和T12加速度(Gmax-T12)的影响次之,而材料参数的变化对胸部变形速率(Vmax)和T1加速度(Gmax-T1)的影响较小。同时,Fmax, Dmax, Gmax-T12等参数主要受软组织材料参数的影响,而肋骨骨折数(NRF)则更多受到骨骼材料参数变化的影响。

Abstract

The purpose of the current study was to analyze the influence of the changes of the material of the human thoracic skeleton and soft tissues on the thorax responses under frontal impact loading condition. A series of human thorax impact simulations were conducted based on a developed and validated human thorax finite element (FE) model. A number of thoracic response parameters were output to investigate the effect of material properties changes on the predicted thoracic responses by using polynomial fitting analysis method. The results of the simulations indicated that the varying of thoracic material properties affects the impact responses with different level. The impact force (Fmax) and chest deflection (Dmax) were affected obviously, and the number of rib fracture (NRF) and T12 acceleration (Gmax-T12) were secondly effected by the material properties. However, the influence of the material properties on the deflection rate (Vmax) and T1 acceleration (Gmax-T1) were small. Specifically, the Fmax, Dmax, Gmax-T12 were mainly influenced by the soft tissue material properties, while the NRF was primarily determined by the thoracic skeletal structure material properties.

关键词

人体胸部 / 有限元模型 / 材料参数 / 碰撞响应

Key words

human thorax / finite element model / material properties / impact response

引用本文

导出引用
王方 1,韩勇 1,李桂兵 2,杨济匡 3. 基于有限元模拟的人体胸部材料参数对其碰撞响应影响分析[J]. 振动与冲击, 2016, 35(8): 90-96
Wang Fang 1, Han Yong 1, Li Gui-bing 2, Yang Ji-kuang 3. Finite Element Analysis of the Effect of Material Properties on Human Thoracic Impact Response[J]. Journal of Vibration and Shock, 2016, 35(8): 90-96

参考文献

[1] Hu J W, Rupp J D, Reed M P. Focusing on vulnerable populations in crashes: recent advances in finite element human models for injury biomechanics research [J]. Journal of Automotive Safety and Energy, 2012, 3(4): 295-307.
[2] Kent R, Lessley D, Sherwood C. Thoracic response to dynamic, non-impact loading from a hub, distributed belt, diagonal belt, and double diagonal belts [J]. Stapp Car Crash Journal, 2004, 48: 495-519.
[3] 蔡志华, 兰凤崇, 陈吉清, 等. 基于汽车碰撞损伤的人体胸部有限元模型构建与验证[J]. 医用生物力学, 2013, 28(1): 36-43.
CAI Zhi-hua, LAN Feng-chong, CHEN Ji-qing, et al. Development and validation for finite element model of human thorax based on automotive impact injuries [J]. Journal of Medical Biomechanics, 2013, 28(1): 36-43.
[4] Song E, Trosseille X, Baudrit P. Evaluation of thoracic deflection as an injury criterion for side impact using a finite elements thorax model [J]. Stapp Car Crash Journal, 2009, 53: 155-191.
[5] Plank G R, Kleinberger M, Eppinger R H. Analytical investigation of driver thoracic response to out of position airbag deployment [J]. Stapp Car Crash Journal, 1998, 42: 317-329.
[6] Kroell C K, Schneider D C, Nahum A M. Impact tolerance and response of the human thorax [J]. Stapp Car Crash Journal, 1971, 15: 84-134.
[7] Kroell C K, Schneider D C, Nahum A M. Impact tolerance and response of the human thorax II [J]. Stapp Car Crash Journal, 1974, 18: 383-457.
[8] Wang, H.-c. K. Development of a side impact finite element human thoracic model [D]. Wayne State University, 1995.
[9] Lizee E, Robin S, Song E, et al. Development of a 3D finite element model of the human body [J]. Stapp Car Crash Journal, 1998, 42: 115-138.
[10] Deng Y C, Kong W, Ho H, Development of a finite element human thorax model for impact injury studies [C]// SAE. International Congress and Exposition. Warrendale: SAE, 1999: 1999-01-0715.
[11] Iwamoto M, Kisanuki Y, Watanabe I, et al. Development of a finite element model of the total human model for safety (THUMS) and application to injury reconstruction [C]// IRCOBI. Proceeding of the international IRCOBI conference. Bron: IRCOBI, 2002: 31-42.
[12] Robin, S. Human model for safety – a joint effort towards the development of refined human-like car occupant models [C]// ESV. International Technical Conference on the Enhanced Safety of Vehicles. Amsterdam: ESV, 2001: Paper No. 01 - 0297.
[13] Ruan J, El-Jawahri R, Chai L, et al. Prediction and analysis of human thoracic impact responses and injuries in cadaver impacts using a full human body finite element model [J]. Stapp Car Crash Journal, 2003, 47: 299-321.
[14] Shigeta K, Kitagawa Y, Yasuki T. Development of next generation human FE model capable of organ injury prediction [C]// ESV. International Technical Conference on the Enhanced Safety of Vehicles. Stuttgart: ESV, 2009: Paper No. 09-0111.
[15] 杨济匡, 姚剑锋. 人体颈部动力学响应分析有限元模型的建立和验证[J]. 湖南大学学报(自然科学版), 2003, 30(4): 40-46.
YANG Ji-kuang, YAO Jian-feng. Development and validation of a human neck FE model in impact loading condition [J]. Journal of Hunan University (Natural Sciences), 2003, 30(4): 40-46.
[16] Yang J, Xu W, Dietmar O. Brain injury biomechanics in real world vehicle accident using mathematical models [J]. Chinese Journal of Mechanical Engineering, 2008, 32: 81-86.
[17] 许伟, 杨济匡. 用于交通伤评估的头部有限元模型的虚拟实验验证[J]. 汽车工程, 2008, 30(2): 151-155.
XU Wei, YANG Ji-kuang. Virtual test validation of human head model for injury assessment in traffic accidents [J]. Automotive Engineering, 2008, 30(2): 151-155.
[18] Yang J, Wang F, Li G. et al. Finite element analysis of thorax responses under quasi-static and dynamic loading [C]// Adam Wittek, Karol Miller and Poul M. F. Nielsen. Computational Biomechanics for Medicine. New York: Springer, 2013: 197-211.
[19] Han Y, Yang J, Mizuno K. Virtual reconstruction of long bone fracture in car-to-pedestrian collisions using multi-body system and finite element method [J]. Chinese Journal of Mechanical Engineering, 2011, 24(6): 1045-1055.
[20] Kimpara H, Lee J B, Yang K H, et al. Development of a three-dimensional finite element chest model for the 5th percentile female [J]. Stapp Car Crash Journal, 2005, 49: 251-269.
[21] Kimpara H, Iwamoto M, Miki K, et al. Biomechanical properties of the male and female chest subjected to frontal and lateral impacts [C]// IRCOBI. Proceeding of the international IRCOBI conference. Lisbon: IRCOBI, 2003: 235-247.
 

PDF(1935 KB)

Accesses

Citation

Detail

段落导航
相关文章

/